某卫星微振动建模与仿真

针对某卫星微振动力学环境,参考IME颤振分析建模方法,建立了一种卫星刚柔耦合多体动力学微振动仿真模型,并通过地面试验验证了利用微振动仿真模型预测卫星在轨微振动响应的有效性,阐述了卫星在轨微振动响应仿真计算预测方法。利用该微振动仿真模型能较准确地预测卫星在轨微振动响应以及微振动传递特性。     

泡沫铝合金镀镍工艺研究

本文研究了在高硅铸铝制备的泡沫铝合金样品上镀镍工艺,提出了一种确定泡沫铝合金表面积的方法。讨论了主盐、还原剂、络合剂、缓冲剂等配方主要成份和ｐＨ 值、温度等工艺条件对化学镀镍的沉积速度和镀层质量的影响,优化了前处理方法,从而得到了适合于泡沫铝合金的镀镍工艺。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

模具工业发展中的几个问题

叙述了对模具工业地位与作用的认识 ,分析了我国加入世贸组织对模具工业的影响 ,并提出了发展模具工业的政策措施建议。     

关于满足海军需求的直8型直升机的改进

本文对直8型机的发展提出了改进、改型的途径,并进行探讨,以满足适应我海军部队使用的各型直8机。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.     

变体平尾翼型气动外形设计方法

为了使飞机在控制飞行姿态时仍然能保持最优升阻比,提出了一种通过改变翼型形状来代替传统控制舵面来控制飞机俯仰的方法。采用伯恩斯坦多项式对机翼的翼型进行数学建模,并采用遗传算法通过空气动力学仿真对翼型进行优化得到一组在一定飞行环境下、产生附加阻力最小且随升力系数变化的翼型形状。通过对比证明在提供相同升力的情况下,变体翼比传统的控制舵面产生更小的附加阻力。根据翼型形状和升力系数的变化采用数据拟合的方法得到翼型形状控制参数随升力变化的规律。通过算例对变化规律的验证表明其可以用来作为飞行姿态控制的翼型形状变化依据。