自由落体下落速度振荡现象的研究

为了研究自由下落物体的速度震荡现象,基于相对运动原理,应用立式风洞研究了5种典型形状的物体在上升气流中的悬浮特性。模型包括球形、正方体、长方体、短圆柱体和碟形等刚体。风速的平均值由皮托管风速计测得,同时通过CCD相机记录了物体达到悬浮状态前后的运动状态并进行了定量分析。实验结果表明：对称性较好的物体具有较稳定的悬浮特性;而非对称性物体,由于不同姿态角下的阻力系数和扭矩系数不同,很难维持一个稳定的悬浮状态,将伴随姿态的变化不断发生振荡运动。从而说明,空间形体对称的物体自由下落过程中可以达到较稳定的最大下落速度,而形体非对称的物体则难以达到确定的最大速度。除实验研究之外,还采用动态网格数值模拟手段计算了二维方形模型下落过程中的姿态角及运动轨迹,同时得到模型不同姿态角下的阻力和扭矩,计算结果也进一步解释了物体下落速度会发生振荡的原因。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

变体平尾翼型气动外形设计方法

为了使飞机在控制飞行姿态时仍然能保持最优升阻比,提出了一种通过改变翼型形状来代替传统控制舵面来控制飞机俯仰的方法。采用伯恩斯坦多项式对机翼的翼型进行数学建模,并采用遗传算法通过空气动力学仿真对翼型进行优化得到一组在一定飞行环境下、产生附加阻力最小且随升力系数变化的翼型形状。通过对比证明在提供相同升力的情况下,变体翼比传统的控制舵面产生更小的附加阻力。根据翼型形状和升力系数的变化采用数据拟合的方法得到翼型形状控制参数随升力变化的规律。通过算例对变化规律的验证表明其可以用来作为飞行姿态控制的翼型形状变化依据。     

正电子素络合形成研究(Ⅱ)

本文讨论了不同测量条件对正电子素络合反应速度常数测定值的影响。实验结果表明,在稀溶液的条件下,使用我们特殊设计的盛装溶液的匣式容器能大大提高放射源的使用率并能完全避免放射性废水。     

Solar activity prediction studies and services in NAOC

Solar activity prediction services started in 1960’s in National Astronomical Observatories, Chinese Academy of Sciences (NAOC). As one of the members of the International Space Environment Service (ISES), Regional Warning Center of China (RWC-China) was set up in 1990’s. Solar Activity Prediction Center (SAPC), as one of the four sub-centers of RWC-China, is located in NAOC. Solar activity prediction studies and services in NAOC cover short-term, medium-term, and long-term forecast of solar activities. Nowadays, certain prediction models, such as solar X-ray flare model, solar proton event model, solar 10 cm radio flux model, have been established for the practical prediction services. Recently, more and more physical analyses are introduced in the studies of solar activity prediction, such as the magnetic properties of solar active regions and magnetic structure of solar atmosphere. Besides traditional statistics algorithms, Machine Learning and Artificial Intelligence techniques, such as Support Vector Machine (SVM) method, are employed in the establishment of forecast models. A Web-based integrated platform for solar activity data sharing and forecast distribution is under construction.     

Radar target novel characteristic detection method

In this paper, a method of radar target detection based on 2-dimensional (2D) fractal dimension is proposed. The proposed approach exploits both range information and azimuth information to estimate fractal dimension. Moreover, the approach can increase the number of the data points. The above two merits result in the fractal dimension estimated by this method is more accurate and robust than the previous method. The detection performance is also better than the previous one, which only makes use of 1-dimensional (1-D) information to estimate fractal dimension. Theoretical analysis and experimental result show that the proposed method performs well in strong clutter background. The proposed method is also validated by real-life radar data, and the better result has been achieved.     

提高花键加工精度的工艺研究

发动机中力及扭矩的传递全部通过渐开线花键副来实现,由于发动机工作转速高,因而要求渐开线花键副传动非常平稳。通过本工艺方法的探索,采用新的工艺加工方法,提高了涡轮泵叶轮、轴的花键加工精度,保证了涡轮泵装配性能的要求。     

Predicting performance in manually controlled rendezvous and docking through spatial abilities

Manually controlled rendezvous and docking (manual RVD) is a challenging space task for astronauts. This study aims to identify spatial abilities that are critical for accomplishing manual RVD. Based on task analysis, spatial abilities were deduced to be critical for accomplishing manual RVD. 15 Male participants performed manual RVD task simulations and spatial ability tests (the object-manipulation spatial ability and spatial orientation ability). Participants’ performance in the test of visualization of viewpoints (which measures the spatial orientation ability) was found to be significantly correlated with their manual RVD performance, indicating that the spatial orientation ability in the sense of perspective taking is particularly important for accomplishing manual RVD.     

The Kumtag meteorite strewn field

The Kumtag meteorite strewn field was found in the Kumtag desert, 132 km south of Hami city in the Xinjiang province, China. It is an ellipse of 2.5 × 7.9 km, with a long axis extending along the northeast-southwest direction. The largest individual meteorite of the strewn field weighs about 10 kg; the smallest individual has a mass of only 27 g. In total, more than 100 individuals with a total mass of more than 180 kg were collected. The location and the distribution of the fragments suggest that the Kumtag meteoroid entered the atmosphere in the direction Northeast-Southwest. All meteorites collected in this strewn field are samples from the same unique meteorite shower. The Kumtag meteorite is an H5 ordinary chondrite with a shock stage S2, and a weathering grade W2. The cosmic ray exposure age of Kumtag is 6.7 ± 0.8 Ma, which is rather typical for H chondrites and which indicates that Kumtag was derived from the massive impact event on its parent body ~7 Ma ago. A significant amount of He has been lost during certain unknown processe(s) before the Kumtag meteorite was ejected from its parent body.     

一种手持式太赫兹探测系统的光学及结构设计*

随着现代安检技术与健康、隐私问题之间的矛盾愈加突出,人们迫切需要高效、便捷、安全的安检技术。首先介绍太赫兹非成像光谱探测技术的原理,提出适合于安检应用的太赫兹光谱探测系统技术指标,然后基于ZEMAX设计出配合该技术指标的光学系统,采用非序列模式对其进行仿真和评价,最后基于ProE设计完成了配合上述光学系统的紧凑型探测系统结构,实现了探测系统的手持式应用。