折叠机翼变体飞机非对称变形控制效率分析

折叠机翼变体飞机变形量大,变形引起的气动参数变化显著,提出一种将非对称变形作为操纵输入的控制方案,研究非对称变形的控制效率和有效区间。首先建立能够完整描述变形过程的非线性动力学方程和气动力模型;然后基于非对称变形控制方法建立一种非对称变形操纵模型;最后通过与常规操纵面效率对比和仿真的动态响应总结出非对称变形操纵的最大变形操纵有效区间。结果表明:在较低飞行速度下非对称变形操纵效率高,非对称变形操纵能够在基准折叠角度90°附近提供最高的滚转操纵效率。     

Kalman弹道滤波器的快速收敛性研究

在弹道修正过程中,需根据一段实测弹道参数,准确地估算常规弹箭的飞行弹道。工程中,常应用Kalman滤波方法,结合质点弹道模型建立六状态滤波弹道模型。速度初值估计的准确性,是对滤波过程造成影响的主要因素。为改善这一状况,采用多项式拟合用以对速度状态进行估计并以此作为滤波初始值。在此种估计下滤波,速度滤波过程可快速收敛,位置滤波过程收敛速度大幅度提高,可使最优弹道诸元参数获取时间缩短30%。     

Satellite proximate interception vector guidance based on differential games

This paper studies the proximate satellite interception guidance strategies where both the interceptor and target can perform orbital maneuvers with magnitude limited thrusts. This problem is regarded as a pursuit-evasion game since satellites in both sides will try their best to capture or escape. In this game, the distance of these two players is small enough so that the highly nonlinear earth-centered gravitational dynamics can be reduced to the linear Clohessy-Wiltshire (CW) equations. The system is then simplified by introducing the zero effort miss variables. Saddle solution is formulated for the pursuit-evasion game and time-to-go is estimated similarly as that for the exo-atmospheric interception. Then a vector guidance is derived to ensure that the interception can be achieved in the optimal time. The proposed guidance law is validated by numerical simulations.     

径向进气系统设计探讨及实验研究

对于双轴压气机实验平台径向进气系统,为研究蜂窝器改善系统供气品质所发挥的作用,应用数值模拟对蜂窝器在进气道的布置位置进行研究,并应用五孔探针实验测量了含有蜂窝器的进气系统过渡段处的气动参数。模拟结果显示蜂窝器布置在弯头的前部及中部均能有效改善流动。实验测量结果显示气流偏航角小于2°,总压、静压及马赫数周向分布均匀,总压恢复系数大于98.3%。实验结果与模拟结果吻合较好,验证了数值研究方法的可信度和可靠性,同时也证明该进气系统的先进性。     

基于社会网络分析法在国内航空安全管理体系研究现状的应用与分析

社会网络分析法能够对国内航空安全管理体系研究现状提供客观定量的分析。以SMS为关键词,在CNKI里检索收录的相关文献。首先,用SATI软件对检索数据进行预处理,构建共词矩阵;然后,用社会网络分析法中的社会密度分析、中心性分析、聚类分析和核心-边缘分析方法对关键词进行研究,分析当前航空安全管理体系研究现状和其研究趋势,为今后研究航空安全管理体系领域提供了参考。     

Space Weather Service for Chinese Space Science Satellites

Strategic Priority Research Program on Space Science has gained remarkable achievements. Space Environment Prediction Center (SEPC) affiliated with the National Space Science Center (NSSC) has been providing space weather services and helps secure space missions. Presently, SEPC is capable to offer a variety of space weather services covering many phases of space science missions including planning, design, launch, and orbital operation. The service packages consist of space weather forecasts, warnings, and effect analysis that can be utilized to avoid potential space weather hazard or reduce the damage caused by space storms, space radiation exposure for example. Extensive solar storms that occurred over Chinese Ghost Festival (CGF) in September 2017 led to a large enhancement of the solar energetic particle flux at 1 AU, which affected the near Earth radiation environment and brought great threat to orbiting satellites. Based on the space weather service by SEPC, satellite ground support groups collaborating with the space Tracking, Telemetering and Command system (TT&C) team were able to take immediate measures to react to the CGF solar storm event.      

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

AZ31镁合金板热成形中的屈服和损伤:本构实现与数值分析

为了准确预测各向异性镁合金板的成形质量,将改进的GTN损伤模型与各向异性拉压不对称的CPB06屈服本构耦合,并考虑了屈服面形状随塑性应变累积的变化,得到了考虑本构参数随塑性应变演化的各向异性屈服CPB06-GTN损伤模型。基于该模型,在ABAQUS/Explict中编译得到了相应的VUMAT子程序,采用单个单元进行了单轴拉伸和压缩模拟,并通过与实验一致性对比验证了子程序的正确性。使用子程序不仅能够模拟镁合金的各向异性屈服及其不规则的硬化,同时也能够模拟镁合金的损伤破坏。此外,采用编写的子程序进行了热拉深成形的数值模拟,模拟预测与实验结果对比表明,采用各向异性损伤模型的计算结果能够准确预测镁合金的变形及其损伤破坏,模拟结果与实验数据吻合;采用合适的压边力和成形的温度条件及非等温成形方法能够提高镁合金的成形性。     

动基座近舰面流场数值模拟

航母尾迹流场对舰载机的着舰有较大影响,所以需要对其流场特点进行研究,分析不同状态下舰载机气动特性的变化。采用嵌套网格技术对航母处于垂荡状态下无人机的着舰进行了模拟。首先,利用SFS2舰船进行数值计算,验证了舰船流场的数值模拟方法。然后,对比了单独无人机定常与非定常计算结果,表明所建立的嵌套网格适用于无人机流场的模拟。接着,对航母单相流和两相流的流场结果进行了分析,结果显示甲板下方的流动对甲板上方流场没有大的影响。因此,忽略了水的影响只对航母在空气流场中的特性进行研究,结果表明航母尾迹非定常特性明显,静止航母下滑轨迹上的速度均处于周期性波动状态,且波动幅值随着远离航母而逐渐衰减;而在垂荡情况下航母尾迹变得更加紊乱,水平方向速度波动的周期性减弱,但垂向速度的波动幅值进一步增大。对于静止航母,无人机在不同时刻着舰气动特性的变化也存在差异;当航母处于垂荡状态时,无人机的升力和俯仰力矩在短时间内会有更大的波动。     

基于小位移旋量的旋翼系统公差建模及分析

直升机的振动问题与加工制造技术紧密相关,降低制造误差可有效减小直升机的振动。为了分析直升机旋翼系统的几何回转精度,基于小位移旋量对零部件装配路径上的关键公差进行建模,通过齐次坐标变换方法对闭环链路上的误差传递进行分析,得到旋翼系统几何回转精度模型;在此基础上,与蒙特卡洛仿真相结合,对旋翼系统的实例模型进行分析。结果表明：旋翼桨叶根部在空间内的变动范围近似呈椭球形变化,在旋转过程中存在复杂的波动情况,桨叶根部在桨盘平面内的径向波动误差约为 0.58%,在垂直桨盘平面方向的波动相对较大,约为 0.89%。