On the Detectability and Use of Normal Modes for Determining Interior Structure of Mars

The InSight mission to Mars is well underway and will be the first mission to acquire seismic data from a planet other than Earth. In order to maximise the science return of the InSight data, a multifaceted approach will be needed that seeks to investigate the seismic data from a series of different frequency windows, including body waves, surface waves, and normal modes. Here, we present a methodology based on globally-averaged models that employs the long-period information encoded in the seismic data by looking for fundamental-mode spheroidal oscillations. From a preliminary analysis of the expected signal-to-noise ratio, we find that normal modes should be detectable during nighttime in the frequency range 5–15 mHz. For improved picking of (fundamental) normal modes, we show first that those are equally spaced between 5–15 mHz and then show how this spectral spacing, obtained through autocorrelation of the Fourier-transformed time series can be further employed to select normal mode peaks more consistently. Based on this set of normal-mode spectral frequencies, we proceed to show how this data set can be inverted for globally-averaged models of interior structure (to a depth of \(\sim 250~\mbox{km}\)), while simultaneously using the resultant synthetically-approximated normal mode peaks to verify the initial peak selection. This procedure can be applied iteratively to produce a “cleaned-up” set of spectral peaks that are ultimately inverted for a “final” interior-structure model. To investigate the effect of three-dimensional (3D) structure on normal mode spectra, we constructed a 3D model of Mars that includes variations in surface and Moho topography and lateral variations in mantle structure and employed this model to compute full 3D waveforms. The resultant time series are converted to spectra and the inter-station variation hereof is compared to the variation in spectra computed using different 1D models. The comparison shows that 3D effects are less significant than the variation incurred by the difference in radial models, which suggests that our 1D approach represents an adequate approximation of the global average structure of Mars.     

Enrichment of the Hot Intracluster Medium: Observations

Four decades ago, the firm detection of an Fe-K emission feature in the X-ray spectrum of the Perseus cluster revealed the presence of iron in its hot intracluster medium (ICM). With more advanced missions successfully launched over the last 20 years, this discovery has been extended to many other metals and to the hot atmospheres of many other galaxy clusters, groups, and giant elliptical galaxies, as evidence that the elemental bricks of life—synthesized by stars and supernovae—are also found at the largest scales of the Universe. Because the ICM, emitting in X-rays, is in collisional ionisation equilibrium, its elemental abundances can in principle be accurately measured. These abundance measurements, in turn, are valuable to constrain the physics and environmental conditions of the Type Ia and core-collapse supernovae that exploded and enriched the ICM over the entire cluster volume. On the other hand, the spatial distribution of metals across the ICM constitutes a remarkable signature of the chemical history and evolution of clusters, groups, and ellipticals. Here, we summarise the most significant achievements in measuring elemental abundances in the ICM, from the very first attempts up to the era of XMM-Newton, Chandra, and Suzaku and the unprecedented results obtained by Hitomi. We also discuss the current systematic limitations of these measurements and how the future missions XRISM and Athena will further improve our current knowledge of the ICM enrichment.     

Evaluating the Wind-Induced Mechanical Noise on the InSight Seismometers

The SEIS (Seismic Experiment for Interior Structures) instrument onboard the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. Here we analyse in-situ wind measurements from previous Mars space missions to understand the wind environment that we are likely to encounter on Mars, and then we use an elastic ground deformation model to evaluate the mechanical noise contributions on the SEIS instrument due to the interaction between the Martian winds and the InSight lander. Lander mechanical noise maps that will be used to select the best deployment site for SEIS once the InSight lander arrives on Mars are also presented. We find the lander mechanical noise may be a detectable signal on the InSight seismometers. However, for the baseline SEIS deployment position, the noise is expected to be below the total noise requirement \(>97~\%\) of the time and is, therefore, not expected to endanger the InSight mission objectives.     

An Investigation of the Mechanical Properties of Some Martian Regolith Simulants with Respect to the Surface Properties at the InSight Mission Landing Site

In support of the InSight mission in which two instruments (the SEIS seismometer and the \(\mbox{HP}^{3}\) heat flow probe) will interact directly with the regolith on the surface of Mars, a series of mechanical tests were conducted on three different regolith simulants to better understand the observations of the physical and mechanical parameters that will be derived from InSight. The mechanical data obtained were also compared to data on terrestrial sands. The density of the regolith strongly influences its mechanical properties, as determined from the data on terrestrial sands. The elastoplastic compression volume changes were investigated through oedometer tests that also provided estimates of possible changes in density with depth. The results of direct shear tests provided values of friction angles that were compared with that of a terrestrial sand, and an extrapolation to lower density provided a friction angle compatible with that estimated from previous observations on the surface of Mars. The importance of the contracting/dilating shear volume changes of sands on the dynamic penetration of the mole was determined, with penetration facilitated by the \(\sim1.3~\mbox{Mg/m}^{3}\) density estimated at the landing site. Seismic velocities, measured by means of piezoelectric bender elements in triaxial specimens submitted to various isotropic confining stresses, show the importance of the confining stress, with lesser influence of density changes under compression. A power law relation of velocity as a function of confining stress with an exponent of 0.3 was identified from the tests, allowing an estimate of the surface seismic velocity of 150 m/s. The effect on the seismic velocity of a 10% proportion of rock in the regolith was also studied. These data will be compared with in situ data measured by InSight after landing.     

The Theory of Gamma-Ray Bursts

This chapter gives a brief review on the theory of gamma-ray bursts (GRBs), including the models of multi-messengers (e.g., prompt multiwavelength electromagnetic emissions, high-energy neutrinos, ultra-high-energy cosmic rays, and gravitational waves) and central engines (in particular, mergers of binary neutron stars for short GRBs). For detailed reviews, please see (Piran in Phys. Rep. 314:575, 1999; Rev. Mod. Phys. 76:1143, 2004; Mészáros in Annu. Rev. Astron. Astrophys. 40:137, 2002; Rep. Prog. Phys. 69:2259, 2006; Zhang and Mészáros in Int. J. Mod. Phys. A 19:2385, 2004; Zhang in Chin. J. Astron. Astrophys. 7:1, 2007; Nakar in Phys. Rep. 442:166, 2007; Kumar and Zhang in Phys. Rep. 561:1, 2015).     

Transforming Dust to Planets

We review recent progress in understanding how nebular dust and gas are converted into the planets of the present-day solar system, focusing particularly on the “Grand Tack” and pebble accretion scenarios. The Grand Tack can explain the observed division of the solar system into two different isotopic “flavours”, which are found in both differentiated and undifferentiated meteorites. The isotopic chronology inferred for the development of these two “flavours” is consistent with expectations of gas-giant growth and nebular gas loss timescales. The Grand Tack naturally makes a small Mars and a depleted, dynamically-excited and compositionally mixed asteroid belt (as observed); it builds both Mars and the Earth rapidly, which is consistent with the isotopically-inferred growth timescale of the former, but not the latter. Pebble accretion can explain the rapid required growth of Jupiter and Saturn, and the number of Kuiper Belt binaries, but requires specific assumptions to explain the relatively protracted growth timescale of Earth. Pure pebble accretion cannot explain the mixing observed in the asteroid belt, the fast proto-Earth spin rate, or the tilt of Uranus. No current observation requires pebble accretion to have operated in the inner solar system, but the thermal and compositional consequences of pebble accretion have yet to be explored in detail.     

Neutrinos from Supernovae

Neutrinos are fundamental particles in the collapse of massive stars. Because of their weakly interacting nature, neutrinos can travel undisturbed through the stellar core and be direct probes of the still uncertain and fascinating supernova mechanism. Intriguing recent developments on the role of neutrinos during the stellar collapse are reviewed, as well as our current understanding of the flavor conversions in the stellar envelope. The detection perspectives of the next burst and of the diffuse supernova background will be also outlined. High-energy neutrinos in the GeV-PeV range can follow the MeV neutrino emission. Various scenarios concerning the production of high-energy neutrinos are discussed.     

Recent Advancements and Motivations of Simulated Pluto Experiments

This review of Pluto laboratory research presents some of the recent advancements and motivations in our understanding enabled by experimental simulations, the need for experiments to facilitate models, and predictions for future laboratory work. The spacecraft New Horizons at Pluto has given a large amount of scientific data already rising to preliminary results, spanning from the geology to the atmosphere. Different ice mixtures have now been detected, with the main components being nitrogen, methane, and carbon monoxide. Varying geology and atmospheric hazes, however, gives us several questions that need to be addressed to further our understanding. Our review summarizes the complexity of Pluto, the motivations and importance of laboratory simulations critical to understanding the low temperature and pressure environments of icy bodies such as Pluto, and the variability of instrumentation, challenges for research, and how simulations and modeling are complimentary.