Gain-scheduled state feedback control design technique for flightvehicles

For multi-input, multi-output (MIMO) nonlinearly parameter dependent linear parameter-varying (LPV) systems with multiple parameters, a design method of gain-scheduled state feedback control using a minimum sensitivity eigenvalue assignment of the frozen parameter closed-loop system with quadratic stability checks is proposed. The proposed design method is applied to the bank-to-turn (BTT) control of a flight vehicle, and the nonlinear 6 degree of freedom (DOF) simulations are performed to show the usefulness as a gain-scheduled state feedback control scheme     

Image restoration of the asymmetric point spread function of a high-resolution remote sensing satellite with time-delayed integration

The calibration and validation team of the Korea Aerospace Research Institute has calibrated and validated the image data of the KOMPSAT-2 since the launch of KOMPSAT-2 on July 28, 2006. The asymmetric phenomenon of the point spread function of the KOMPSAT-2 image data is evident in both the along and the across direction, most likely because KOMPSAT-2 has a 1 m ground sample distance high-resolution camera with time-delayed integration. Furthermore, because KOMPSAT-2 is in space, the KOMPSAT-2 image data has been corrected with good results by means of modulation transfer function compensation.     

关于航空公司对OEM客户服务满意度的调查

<正>2018年,《航空周刊》和AeroD ynamic咨询公司首次联合开展了《对OEM客户服务满意度的调查》,在给OEM的工作带来一定压力的同时,也为OEM在售后服务方面的改进指出了明确的方向,反响很好。今年,这一调查仍在继续并得出了一些不一样的结果,如空客的整体得分较去年有所提高、巴航工业的     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Visualization and PIV study of wing-tip vortices for three different tip configurations

The planform, profile, and cross-sectional views of the wing-tip region of a half-wing model with an aspect ratio of 3.2 and three different wing configurations, namely, square-cut, simple fairing, and Whitcomb?s full winglet wing-tip, were visualized at various angles of attack using smoke-wire visualization technique. Visualization pictures clearly show that the wing-tip vortices at different angles of attack and wing-tip configurations had distinct formation and structure characteristics. A comparison of simple fairing and Whitcomb?s winglet configurations shows that the wing-tip vortices of the Whitcomb?s winglet configuration were reduced in strength and displaced outboard and upward, at least in the near-wake region. This resulted in an increased lift-to-drag ratio for the Whitcomb?s winglet configuration. The changes in the wing-tip vortex characteristics and the improved aerodynamic performance of the winglet were confirmed by Particle Image Velocimetry (PIV) measurements of the cross-flow velocity of the wing-tip trailing regions and the force measurement of the model.     

The autocorrelation of m-sequences over nonprime finitefields

Nonbinary m-sequences (maximal length sequences) for spread-spectrum communication systems that have a two-level autocorrelation are presented. The autocorrelation function of an m -sequence over the Galois field of q elements GF(q), where q=p^k, for p a prime and k an integer greater than 1, is developed and shown to be bilevel when the elements of GF(q) are expressed as elements of a vector space over the pth roots of unity     

Shock acceleration of energetic particles in the heliosphere

The theory of shock acceleration of energetic particles is briefly discussed and reviewed with an emphasis on clarifying the apparent distinction between the V × B and Fermi mechanisms. Attention is restricted to those situations in which the energetic particles do not themselves influence the given shock structure. In particular, application of the theory to the acceleration of energetic particles in corotating interaction regions (CIR) in the solar wind is presented. Here particles are accelerated at the forward and reverse shocks which bound the CIR by being compressed between the shock fronts and magnetic irregularities upstream from the shocks, or by being compressed between upstream irregularities and those downstream from the shocks. Particles also suffer adiabatic deceleration in the expanding solar wind, an effect not included in previous shock models for acceleration in CIRs. The model is able to account for the observed exponential spectra at Earth, the observed behavior of the spectra with radial distance, the observed radial gradients in the intensity, and the observed differences in the intensity and spectra at the forward and reverse shocks.Calculations and resulting energy spectra are also presented for shock acceleration of energetic particles in large solar flare events. Based on the simplifying assumption that the shock evolves as a spherically symmetric Sedov blast wave, the calculation yields the time-integrated spectrum of particles initially injected at the shock which eventually escape ahead of the shock into interplanetary space. The spectra are similar to those observed at Earth. Finally further applications are suggested.An invited paper presented at STIP Workshop on Shock Waves in the Solar Corona and Interplanetary Space, 15–19 June, 1980, Smolenice, Czechoslovakia.     

An Introduction to Theory and Models of CMEs, Shocks, and Solar Energetic Particles

We present a brief introduction to the essential physics of coronal mass ejections as well as a review of theory and models of CME initiation, solar energetic particle (SEP) acceleration, and shock propagation. A brief review of the history of CME models demonstrates steady progress toward an understanding of CME initiation, but it is clear that the question of what initiates CMEs has still not been solved. For illustration, we focus on the flux cancellation model and the breakout model. We contrast the similarities and differences between these models, and we examine how their essential features compare with observations. We review the generation of shocks by CMEs. We also outline the theoretical ideas behind the origin of a gradual SEP event at the evolving CME-driven coronal/interplanetary shock and the origin of “impulsive” SEP events at flare sites of magnetic reconnection below CMEs. We argue that future developments in models require focused study of “campaign events” to best utilize the wealth of available CME and SEP observations.     

热障涂层喷涂质量微焦点CT检测

采用微焦点X射线源对热障涂层样品进行了高分辨率X射线成像研究,采用多尺度对比度增强算法提高了热障涂层与基体之间的对比度.X射线图像显示热障涂层各处厚度差异较大,热障涂层内部可能存在大量孔隙.通过微焦点计算机层析成像(CT)对样品进行了高分辨率CT扫描与重建,得到了样品的CT重建图像.从热障涂层CT图像观察到热障涂层内部存在大量孔隙,且不同层孔隙尺寸、数量不同.结合3个坐标方向的切片图像分析了热障涂层深度方向的热障涂层厚度,得到了热障涂层厚度的二维分布,测量得到热障涂层平均厚度约为40μm.对沿热障涂层深度方向850~1131层切片图像,利用可视化软件VGstudio MAX得到了热障涂层内部孔隙三维分布.研究结果表明:微焦点CT可用于热障涂层制备工艺质量检测.