应用于小发柔性转子的高速动平衡技术

从某新型涡轴发动机动力涡轮转子的结构特点出发 ,简要说明了对该转子进行实际高速动平衡操作存在的困难及采取的对策。在试验过程中 ,创造性地应用影响系数法和自行设计加工的精密平衡卡箍 ,高质量地完成了细长柔性转子的高速动平衡试验。研究表明 :高速动平衡技术可大大减小细长柔性转子的动挠度和支承动反力 ,从而达到减小发动机振动的目的     

细观力学有限元法预测复合材料宏观有效弹性模量

基于能量等效原理提出了复合材料有效弹性模量的定义，并指出了该定义的基础及前提条件。为从理论上计算复合材料宏观有效弹性模量，建立了通过细观力学有限元法计算复合材料有效弹性模量的方法。复合材料宏观弹性模量，是通过对复合材料细观结构代表性体积元的力学响应的计算来得到，在该计算方法中，给出了施加简便的边界载荷以及恰当的边界变形约束条件的方法。数值计算结果与部分试验结果具有较好的一致性，表明所提出的方法能够较好地计算复合材料的宏观有效弹性模量。     

Correction to: Determining the Relative Cratering Ages of Regions of Psyche’s Surface

Space Science Reviews - Analysis of Homestake, Gallex and GNO measurements reveals evidence of variability of presumed solar-neutrino-flux measurements. Analysis of Super-Kamiokande neutrino...     

基于试验气动力的纵向机动飞行载荷分析

提出了一种基于非线性风洞试验数据(简称试验气动力)同步进行纵向机动飞行过程和飞行载荷的计算分析方法.通过曲面样条插值将试验气动力的升力系数和俯仰力矩系数引入纵向机动飞行过程的计算,同时基于试验气动力的压力分布进行全机飞行载荷的静气动弹性修正.弹性载荷的计算采用线性气动力影响系数矩阵处理.采用偶极子格网法提供气动力(简称理论气动力).将基于这两种气动力的计算结果进行了对比.结果表明:基于试验气动力的机动飞行过程更为合理;基于理论气动力的载荷随机动飞行过程的变化趋势有可能与基于试验气动力的载荷变化趋势不一致.      

Models of P/Borrelly: Activity and dust mantle formation

Comet 19P/Borrelly was observed by Deep Space One spacecraft on September 22, 2001 (Soderblom et al., 2002).The DS1 images show a very dark and elongate nucleus with a complex topography; the IR spectra show a strong red-ward slope consistent with a very hot and dry surface (345K to 300K). During DS1 encounter the comet coma was dominated by a prominent jet but most of the comet was inactive, confirming the Earth-based observations that <10% of the surface is actively sublimating. We have developed a thermal evolution model of comet PBorrelly, using a numerical code that is able to solve the heat conduction and gas diffusion equations at the same time across an idealized spherical nucleus ( De Sanctis et al., 1999, 2000; Capria et al., 2000; Coradini et al., 1997a,b). The comet nucleus is composed by water, volatiles ices and dust in different proportions. The refractory component is made by grains that are embedded in the icy matrix. The code is able to account for the dust release, contributing to the dust flux, and the formation of dust mantles on the comet surface. The model was applied to a cometary nucleus with the estimated physical and dynamical characteristics of P/Borrelly in order to infer the status and activity level of a body on such an orbit during the DS1 observation. The comet gas flux, differentiation and thermal behavior were simulated and reproduced. The model results are in good agreement with the DS1 flyby results and the ground based observations, in terms of activity, dust coverage and temperatures of the surface.     

The radiation environment in the ISS-USLab measured by ALTEA: Spectra and relative nuclear abundances in the polar,equatorial and SAA regions

We present here the energy spectra relative to different geomagnetic regions as measured by the ALTEA (Anomalous Long Term Effects on Astronauts) detector in the International Space Station – USLab from August 2006 to July 2007.     

Countermeasure Against Regenerative and Forced Chatter of Flexible Workpieces in Milling Processs Using Bi-directional Excitation

A novel extended methodology for chatter suppression in milling process by applying external forced vibrations to the workpiece in two orthogonal directions which are the feed and cross-feed directions.Both the regenerative and forced chatter suppression during the milling process of flexible workpieces are investigated.Here,the workpiece is subject to a sinusoidal periodic force in the feed direction to disrupt the regenerative effect.Additionally,to minimize the forced chatter,the workpiece is subject to the periodic excitation force in cross-feed direction.This force is proportional to the magnitude of the estimated cutting force in cross-feed direction and has a phase opposite to the cutting force to minimize the vibration amplitudes.The effectiveness of the proposed method is evaluated numerically and experimentally,for the spindle speed located in both the local minima and local maxima of the stability lobe diagram.The numerical simulations indicate significant suppression effect in terms of vibration amplitudes,resulting in suppression of both the regenerative chatter and the forced chatter.Experiments were conducted by using a workpiece-mounted active stage composed of flexure hinges and driven by piezoelectric actuators.The experimental results agree qualitatively with the numerical simulations.The proposed method indicates a remarkable vibration reduction effect for both regenerative and forced chatters.     

天基监视雷达的距离游走和距离重叠补偿研究

为了实现天基雷达杂波消除、高分辨率的角度估计和广域监视功能,采用三通道相位中心偏置天线（DPCA）/monopulse（单脉冲）信号处理系统。天基雷达的运动和地球自转,使得地球上每一点的杂波都产生了附加的多普勒成分——距离游走效应。距离游走与距离重叠效应相结合,显著地降低DPCA处理算法的杂波抑制性能。针对距离游走效应在相干处理阶段进行反向补偿、在非相干积累阶段采用线性内插的方法进行校正,针对距离重叠效应采用基于普罗米修斯结构的波形分集技术进行校正。实验结果显示,提出的距离游走和距离重叠综合补偿方案显著提高杂波抑制效果。
     

Deorbiting with electrodynamic tethers: comparison between different tether configurations

Electrodynamic tethers have been recently proposed for satellite and rocket upper stage deorbiting to mitigate the debris problem at Low Earth Orbits (LEOs). The deorbiting performance of several electrodynamic tethers, where the electron collection from the ionosphere is obtained with either simple bare wires or bare wires terminated with conducting spherical collectors, was analyzed and compared. Our results indicate that the use of the spherical collectors at the positive termination of the system significantly enhances the deorbiting capabilities of the electrodynamic bare tethers.