Toward a theoretical description of vortex wake asymmetry

Previous studies have suggested that the asymmetric vortex wake which develops behind an axisymmetric body at angle of attack is the result of the amplification of a disturbance introduced at the tip of the body. The potential-flow vortex wake of a circular cylinder in cross-flow is examined and similarities to the wake of the axisymmetric body at incidence are described. The implications of these similarities for the suggested model are discussed, and an argument is made that the vortex trajectories are fixed at a given angle of attack and shifted upstream or downstream by the initial disturbance. The need for further detailed experimental studies of the asymmetric vortex wake development is noted.     

Estimations of the Seismic Pressure Noise on Mars Determined from Large Eddy Simulations and Demonstration of Pressure Decorrelation Techniques for the Insight Mission

The atmospheric pressure fluctuations on Mars induce an elastic response in the ground that creates a ground tilt, detectable as a seismic signal on the InSight seismometer SEIS. The seismic pressure noise is modeled using Large Eddy Simulations (LES) of the wind and surface pressure at the InSight landing site and a Green’s function ground deformation approach that is subsequently validated via a detailed comparison with two other methods: a spectral approach, and an approach based on Sorrells’ theory (Sorrells, Geophys. J. Int. 26:71–82, 1971; Sorrells et al., Nat. Phys. Sci. 229:14–16, 1971). The horizontal accelerations as a result of the ground tilt due to the LES turbulence-induced pressure fluctuations are found to be typically \(\sim 2 \mbox{--} 40~\mbox{nm}/\mbox{s}^{2}\) in amplitude, whereas the direct horizontal acceleration is two orders of magnitude smaller and is thus negligible in comparison. The vertical accelerations are found to be \(\sim 0.1\mbox{--}6~\mbox{nm}/\mbox{s}^{2}\) in amplitude. These are expected to be worst-case estimates for the seismic noise as we use a half-space approximation; the presence at some (shallow) depth of a harder layer would significantly reduce quasi-static displacement and tilt effects.We show that under calm conditions, a single-pressure measurement is representative of the large-scale pressure field (to a distance of several kilometers), particularly in the prevailing wind direction. However, during windy conditions, small-scale turbulence results in a reduced correlation between the pressure signals, and the single-pressure measurement becomes less representative of the pressure field. The correlation between the seismic signal and the pressure signal is found to be higher for the windiest period because the seismic pressure noise reflects the atmospheric structure close to the seismometer.In the same way that we reduce the atmospheric seismic signal by making use of a pressure sensor that is part of the InSight Auxiliary Payload Sensor Suite, we also the use the synthetic noise data obtained from the LES pressure field to demonstrate a decorrelation strategy. We show that our decorrelation approach is efficient, resulting in a reduction by a factor of \(\sim 5\) in the observed horizontal tilt noise (in the wind direction) and the vertical noise. This technique can, therefore, be used to remove the pressure signal from the seismic data obtained on Mars during the InSight mission.     

The Genesis Solar Wind Concentrator

The primary goal of the Genesis Mission is to collect solar wind ions and, from their analysis, establish key isotopic ratios that will help constrain models of solar nebula formation and evolution. The ratios of primary interest include ¹⁷O/¹⁶O and ¹⁸O/¹⁶O to ±0.1%, ¹⁵N/¹⁴N to ±1%, and the Li, Be, and B elemental and isotopic abundances. The required accuracies in N and O ratios cannot be achieved without concentrating the solar wind and implanting it into low-background target materials that are returned to Earth for analysis. The Genesis Concentrator is designed to concentrate the heavy ion flux from the solar wind by an average factor of at least 20 and implant it into a target of ultra-pure, well-characterized materials. High-transparency grids held at high voltages are used near the aperture to reject >90% of the protons, avoiding damage to the target. Another set of grids and applied voltages are used to accelerate and focus the remaining ions to implant into the target. The design uses an energy-independent parabolic ion mirror to focus ions onto a 6.2 cm diameter target of materials selected to contain levels of O and other elements of interest established and documented to be below 10% of the levels expected from the concentrated solar wind. To optimize the concentration of the ions, voltages are constantly adjusted based on real-time solar wind speed and temperature measurements from the Genesis ion monitor. Construction of the Concentrator required new developments in ion optics; materials; and instrument testing and handling. This revised version was published online in August 2006 with corrections to the Cover Date.     

A Brief History of CME Science

We present here a brief summary of the rich heritage of observational and theoretical research leading to the development of our current understanding of the initiation, structure, and evolution of Coronal Mass Ejections.     

Past and future of radio occultation studies of planetary atmospheres

Measurements of radio waves that have propagated through planetary atmospheres have provided exploratory results on atmospheric constituents, structure, dynamics, and ionization for Venus, Mars, Titan, Jupiter, Saturn, and Uranus. Highlights of past results are reviewed in order to define and illustrate the potential of occultation and related radio studies in future planetary missions.     

Impact of loading effects on determination of the International Terrestrial Reference Frame

The International Terrestrial Reference Frame (ITRF), as a realization of the International Terrestrial Reference System (ITRS), is represented by a set of station positions and linear velocities. They are intended to be used as regularized coordinates to which some corrections should be added to access instantaneous coordinates. The latest ITRS realization is the ITRF2005, which has integrated time series of station positions to form long-term solutions for the four space geodetic techniques. Currently, a purely linear model is used to parameterize station displacements in the estimation process, plus occasional discontinuities in case of earthquakes or equipment changes. However the input data have been derived without applying surface loading models and so surface loading effects are supposed to be embedded in the coordinates as measured quantities. We evaluate the effect of applying a posteriori loading corrections, which include the effect of atmospheric, non-tidal ocean, and continental water loading, to time series of positions estimated from Satellite Laser Ranging (SLR), Very Long Baseline Interferometry (VLBI), and Global Positioning System (GPS) data. We notice that they reduce about 50% or more of the annual signals in the translation and scale parameter time series of the SLR and VLBI techniques, except in SLR Z translation. In general, the estimated secular frame definition is negligibly affected and estimated positions and velocities are not significantly modified for stations that have accumulated a large number of observations. A multi-technique combination of such derived frames allows concluding that, for some cases, loading model corrections might degrade co-located station coordinates almost as much as they benefit them. However, most significant improvement of the estimated secular coordinates is observed for stations with less than 100 estimated positions as demonstrated with a multi-technique combination.     

Measuring Techniques Applied in an MHD-Augmented Shock Tunnel

The determination of the detailed performance of an MHD-augmented high-enthalphy shock tunnel requires the simultaneous measurment of a large number of aerodynamic, electrical, and electromagnetic parameters in a test time interval of the order of several hundred microseconds. In the feasibility study currently being conducted in our laboratory of such a device, an extensive measuring system was set up and evaluated, and is being used to acquire facility performance data. This paper describes this measuring system, discusses the modifications and adaptations applied to make the various components of the system operable and compatible, and gives illustrative examples of the performance of the system.     

Effect of Processing and Composition on the Structure and Properties of P/M EP741NP Type Alloys

A study was carried out on the effects of processing and composition on the structure and properties of P/M EP741NP type alloys. The objectives of this study were to understand the role of Hf in a P/M superalloy containing high niobium used in aircraft engines and to determine the effects of extrusion and forging the powders as contrasted to HIPing (hot isostatic pressing) only. Two alloys of the P/M EP741NP composition were atomized: one alloy contained 0.26%Hf and the other was Hf free. After the as-atomized powders from both alloys were characterized, the powders were extruded into billets, forged and heat treated. After each process, the microstructures were characterized by SEM and the phases were extracted and identified by X-ray diffraction. The presence of Hf in the residues was probed by EDS (energy dispersive spectroscopy). The alloys were given the published Russian heat treatment as well as a more conventional heat treatment more typical of western powder alloys. Tensile, creep and stress rupture mechanical property tests were run. Results of the structural behavior of the alloys after each processing step will be presented and discussed. The role of the Hf on the mechanical proper- ties will be discussed.     

The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.