Influence of geometry and operating conditions of a centrifugal compressor stage on the radial gas force

The influence of geometry and operating conditions of the centrifugal compressor stage on the radial gas force is determined on the basis of the theoretical method and calculation program using experimental boundary conditions.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

Thermal stresses in a multilayer hollow cylinder under thermal shock on its external surface

An exact analytical solution of the thermoelasticity problem is presented for a multilayer shallow cylinder with physical properties of the medium that are constant in the limits of each layer. The effect of thermal shock of different intensity as well as the penetration depth of thermal disturbance on the distribution of radial and circumferential thermal stresses has been studied as applied to the one- and two-layer cylinder. It has been shown that the circumferential compressive stresses appear on the external surface of the cylinder under thermal shock while the tensile stresses appear on the internal surface.     

Flow between finite and infinite disks with consideration of surface mobility

A problem of modeling the incompressible viscous flow between two disks taking into account the rotation of one of them is considered. We study the effect of the disk angular velocity (flow regimes) in the interdisk spacing, finiteness (infiniteness) of disk radiuses, calculation region configuration as well as distances between disks on the flow characteristics, particularly, on the resistance moment coefficient. Numerical simulation is performed with the aid of Maple and ANSYS Fluent software.     

Calculations of shock wave energy parameters in the presence of high-voltage electrical discharge in water for the transition region

A technique for calculating the energy parameters of shock waves at electrical discharge in water is presented for the transition region of discharge channel expansion using as the base the predetermined characteristics of discharge circuit. The technique is based on the solution of energy transport equation that is similar in form to that of radiative transfer. The validity of the presented approach was experimentally verified.     

Systems for the indication and display of secondary information in avionics and autobasing complexes

We consider the peculiarities of application for the cabin indicating systems of secondary information display, formulate and systematize the compositional and technical requirements for display systems and their elements. The tendencies and lines in the development of head-up displays for avionics and autobasing complexes were determined. The technique of calculating optics of such display systems with the use of electronic distortion compensation is presented.     

Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

A new global version of M(3000)F2 prediction model based on artificial neural networks

A new version of global empirical model for the ionospheric propagation factor, M(3000)F2 prediction is presented. Artificial neural network (ANN) technique was employed by considering the relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. This new version is an update to the previous neural network based M(3000)F2 global model developed by Oyeyemi et al. (2007), and aims to address the inadequacy of the International Reference Ionosphere (IRI) M(3000)F2 model (the International Radio Consultative Committee (CCIR) M(3000)F2 model). The M(3000)F2 has been found to be relatively inaccurate in representing the diurnal structure of the low latitude region and the equatorial ionosphere. In particular, the existing hmF2 IRI model is unable to reproduce the sharp post-sunset drop in M(3000)F2 values, which correspond to a sharp post-sunset peak in the peak height of the F2 layer, hmF2. Data from 80 ionospheric stations globally, including a good number of stations in the low latitude region were considered for this work. M(3000)F2 hourly values from 1987 to 2008, spanning all periods of low and high solar activity were used for model development and verification process. The ability of the new model to predict the M(3000)F2 parameter especially in the low latitude and equatorial regions, which is known to be problematic for the existing IRI model is demonstrated.     

Rocket berthing to an asteroid: Design problems

The results of research in a process of a probe rocket berthing to an asteroid are presented. Control laws were obtained as solutions of three problems, namely berthing considering transient processes in a rocket engine, fastest berthing with regard to fuel consumption and berthing in a scheduled time considering fuel consumption. A program trajectory obtained at solving of the first problem is suitable for mathematical modeling of berthing with the feedback control law and stabilization of angular motion. The solutions of the problems are reduced to simple formulas for controlling parameters calculation in the corresponding structures of control laws. The results can be applied in designing promising space vehicles intended for berthing to other space objects.     

Spherical accretion of massive black holes: A model for galactic nuclei

The possibility of explaining the continuous emission of active galactic nuclei in the frame of a model of spherical accretion onto a massive black hole is discussed. Cool inhomogeneities (T 10⁴°K) within the accretion flow could be responsible for the broad line emission if half of the accreting matter is in the dense phase. A crucial test of this hypothesis is the expected correlation between the ratio of the luminosity in lines to the total luminosity and the hardness of the continuous spectrum.