关于疲劳裂纹扩展数学模型的参数寻优

本文通过引入工程设计中的优化方法，分别对室内空气环境下铝合金（ＬＹ１２－ＣＺ）材料疲劳裂纹扩展的数学模型，以及环境条件下（３．５％ＮａＣｌ水溶液浸泡）该材料腐蚀疲劳裂纹扩展的数学模型进行了探讨。在已知标准试样在不同的环境下疲劳裂纹扩展实验ｄａｄＮｉ，ΔＫｉ的条件下，采用优化方法进行参数寻优，可方便地得到与其对应的疲劳裂纹扩展的ｄａｄＮ～ΔＫ最优数学模型     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

X射线探伤机空气比释动能率测量不确定度评定

基于X射线探伤机空气比释动能率测量的数学模型，对其测量不确定度进行了评定。     

域外刑事评议程序之比较研究

刑事评议程序是介于庭审程序和宣告程序之间的一个重要程序,它既是庭审的自然延续,又是裁判结论形成的前提和基础。然而,欲保证刑事评议程序的正常运行,刑事评议主体之独立必须得到保证;刑事评议之客体还应被全面考虑,并对其进行细化,以确保刑事评议的针对性和有效性,防止出现"估堆"现象。本文以域外刑事评议程序为对象,从评议的主体、客体等角度进行梳理,得出规律性的认识,以期对我国关于刑事评议的立法有所裨益。     

数字式射击瞄准计算机设计与实现

某型射击军械系统的射瞄计算机原采用模拟机电式技术实现,存在体积大、功耗大、可靠性及可维护性差等缺点,因此,使用数字式计算机技术对其进行升级改造势在必行.本文首先对原系统的火控原理及火控构型的进行了分析;其次,介绍了射击瞄准计算机的对外接口关系.重点介绍了数字式射击瞄准计算机的采样解算时间的确定、计算方法的选取及接口设计等内容.本文所设计的数字式射击瞄准计算机已通过了系统验证并得到了使用,克服了原有系统所存在的固有缺点.文中的设计思想与所用的工程方法对类似武器系统的升级改造有所借鉴.     

基于DWDM光接入网的波长分配算法

本文介绍了一种基于DWDM光接入网的波长分配算法，该算法在保证基本服务质量的前提下，通过调度共享波长降低业务请求过程中的阻塞率。文中还对该算法进行了计算机仿真实验，仿真结果表明了该算法的有效性。     

关于平面空穴流动的截断误差减小方法(英文)

提出了一种新的截断误差减小方法。该方法是利用在粗网格 ( 2 h)上估算截断误差进而减小在原始网格( h)上的误差的迭代过程 ,最终目的是利用粗网格得出更精确的结果以及发展一种新的粗网格直接数值模拟方法     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。