Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

卫星图像采集任务调度系统的设计与实现

随着卫星遥感技术的高速发展 ,卫星图像在众多领域有了广泛的应用。文章给出了一个卫星图像采集任务调度系统的总体结构及其功能 ,讨论了该系统实现过程中的卫星资源描述、卫星图像采集任务描述、调度引擎、卫星时间窗口的仿真计算、调度结果的可视化展现等关键技术 ,归纳了系统的特点 ,并总结了今后系统的研究方向     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

CBERS-1卫星CCD相机零级图像处理研究

CCD相机是CBERS - 1卫星上的主要有效载荷之一。利用其接收的可见光和近红外谱段的图像 ,可以在国民经济的各个生产部门 ,诸如国土资源调查、农业、林业、地矿、水利、环境、生态等方面得到广泛应用。但是由于探元和光学系统成像的物理机制和各种干扰等因素影响 ,地面接收到的数据必须经过处理才能应用。文章介绍的内容就是将这种图像数据经图像预处理 ,得到零级图像 ;经过相应的辐射校正 ,得到一级图像 ;经过几何校正 ,得到二级图像产品 ,提供给其它部门加以应用     

国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较     

一种新的星模式识别算法

研究了面向星敏感器的星模式识别算法。首先扼要介绍了到目前为止出现的所有面向星敏感器的星模式识别算法和星图预处理，然后详细论述了本文提出的基于旋转和比例不变点特征松弛匹配算法的一种新的面向星敏感器的星模式识别算法。在第三部分通过仿真试验检验了新算法的性能。初步的仿真试验结果表明该星模式识别算法性能优良，具有实用价值。最后讨论了待深入研究的问题。     

航空航天器配电变换器测试性设计及其仿真研究

文章首先介绍了航空航天器配电系统的组成和作用,进而指出了对配电系统进行测试性设计的实际工程意义。结合航空静止变流器为例详细论述了此类配电变换器装置的性能、组成结构和控制方法,提出了一种基于测试可控性设计以较低成本实现航空静止变流器的板级电路故障诊断方案,给出了系统故障诊断逻辑判断流程。最后搭建了航空静止变流器的仿真模型,通过详细分析变流器系统仿真结果,验证了该方案的可行性。     

基层工作难点问题研究之三——浅谈职工的责任意识和纪律观念

职业道德和职业技能是从业人员需要具备的两个基本素质。由于行业性质不同,职业道德的侧重点又有所区别,但不论怎样演变,“职业责任”和“职业纪律”始终是贯穿在职业道德中的精髓。以保障飞行安全为己任的民航空管行业,特别应该注重对人员责任意识和纪律观念的培养。简单地讲,