Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

智能天线结构模糊自适应变形控制实验研究

基于dSPACE半物理仿真系统和所研制的压电作动器,设计并构建了智能天线结构实验平台,进行了结构变形控制实验研究。实验中采用常规PID作为基本控制方法,并在此基础上设计了一种模糊自适应PID控制器,将两种方法对应的不同控制效果进行了对比。结果表明:在所给的实验条件下,基于压电材料可实现对智能天线结构变形的控制,作动器控制变形量最大可达166μm;两种控制方法均可对结构变形进行控制,模糊自适应方法的绝对位置控制精度达到±0.5μm;应用模糊自适应PID控制方法对结构进行变形控制,较之常规PID控制方法能够降低系统响应的超调量,缩短稳定时间,提高控制精度,得到更好的控制过程。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

基于UKF的航天器最小参数姿态矩阵估计方法

钊对航天器的惯性-星光姿态确定系统，选取基于矢量观测的最小参数姿态矩阵估计方法为定姿算法。但是由于系统模型是非线性的，针对系统模型的非线性，将UKF（Unscented Kalman Filter）与最小参数姿态矩阵估计方法结合，设计了一种针对MEMS陀螺和CMOS APS星敏感器的UKF姿念估计器。仿真结果表明：在敏感器精度较差的情况下，该UKF、姿态估计器能够满足大多数航天器对姿态确定精度的要求。此外，UKF和EKF（Extended Kalman Filter）的仿真对比结果表明：UKF滤波器的收敛速度高于EKF滤波器，状态估计的精度也优于EKF滤波器，且数值稳定性好。     

论提高思想政治理论课教育实效性的学生主体意识

高校思想政治理论课教育最大的问题就是实效性不理想,其原因是多方面的,但主要原因是在教育过程中,忽视了学生的主体意识。论文通过分析高校思想理论课教学过程中存在的忽视学生主体性的问题,提出了通过培养学生主体意识、改革教学方法、拓宽教学形式、注重教学过程中的情感投入等方面的改革,切实提高高校思想政治理论课教育的实效性。     

固体火箭发动机推力线横移和偏斜模拟计算

分析了固体火箭发动机推力线横移和偏斜的影响因素，介绍了由静态影响因素引起的偏差计算方法，得到的模拟计算结果与实测结果相近。这种计算方法将有助于改进导弹的姿态控制精度。     

椭圆轨道编队常值推力构形变化控制方法

采用T-H方程作为椭圆轨道编队的动力学描述，推导了常值推力作用下的椭圆轨道编队的构形变化控制方法。通过合理的选择控制量的作用时刻，可达到大量节约燃料的目的。结合该构形控制方法给出了燃料均衡与燃料最优的解决方案；最后，给出的仿真算例说明了本文设计方法的有效性。