Study of the optical and mechanical properties of regolith with the ICAPS facility

Regoliths are a most important component of solar system bodies. The study of their formation and evolution depends upon measurements from orbiting spacecraft or Earth-based observations, and by the development of models addressing formation and evolution scenarios, physical properties and composition of the constituent materials. For asteroids and comets, recent measurements tend to confirm the idea of extremely low bulk densities. The porosity of the outermost regolith layers should thus reach very high values. Regolith formation and growth partly depends upon gravity and mechanical properties of its constituent particles, which are very poorly documented. Gravitational effects play an important role in the shaping processes of large bodies, while material strength properties are more important for smaller bodies. The understanding of both, aggregation processes of, and of light scattering from, such media, would strongly benefit from experiments led under microgravity, and provide insight into regolith formation processes: much lower collision and aggregation velocities can be achieved in a microgravity environment, leading to the formation of much fluffier aggregates than possible on Earth. ICAPS is a multi-year scientific programme to simulate cosmic and atmospheric particle systems on board the International Space Station. The ICAPS facility will allow to build simulated regolith and thus enable the study of their mechanical and optical properties. Measurements such as tensile strength, electrical and thermal conductivities, compressibility and porosity, will be made, as well as monitoring of collisions into such simulated regolith. The article discusses the ICAPS research plan for regolith studies and the facility current status.     

The model of turbulent plasma sheet during IMF Bz > 0

Theory of the plasma sheet with medium-scale developed turbulence gives the possibility to explain the main processes of plasma sheet bifurcation and theta-aurora formation during IMF B_z > 0. The model suggests that during IMF B_z > 0 small bulge structure in the plasma sheet center is formed. The polarization of the bulge due to dawnward electron motion and duskward ion motion decreases the large-scale electric field in the bulge region. The decrease of the large-scale field in the conditions of constant coefficient of diffusion leads to the bulge growth. The results of plasma sheet bifurcation and theta-aurora formation modelling are presented.     

Life sciences flight hardware development for the International Space Station.

During the construction phase of the International Space Station (ISS), early flight opportunities have been identified (including designated Utilization Flights, UF) on which early science experiments may be performed. The focus of NASA's and other agencies' biological studies on the early flight opportunities is cell and molecular biology; with UF-1 scheduled to fly in fall 2001, followed by flights 8A and UF-3. Specific hardware is being developed to verify design concepts, e.g., the Avian Development Facility for incubation of small eggs and the Biomass Production System for plant cultivation. Other hardware concepts will utilize those early research opportunities onboard the ISS, e.g., an Incubator for sample cultivation, the European Modular Cultivation System for research with small plant systems, an Insect Habitat for support of insect species. Following the first Utilization Flights, additional equipment will be transported to the ISS to expand research opportunities and capabilities, e.g., a Cell Culture Unit, the Advanced Animal Habitat for rodents, an Aquatic Facility to support small fish and aquatic specimens, a Plant Research Unit for plant cultivation, and a specialized Egg Incubator for developmental biology studies. Host systems (Figure 1A, B: see text), e.g., a 2.5 m Centrifuge Rotor (g-levels from 0.01-g to 2-g) for direct comparisons between g and selectable g levels, the Life Sciences Glovebox for contained manipulations, and Habitat Holding Racks (Figure 1B: see text) will provide electrical power, communication links, and cooling to the habitats. Habitats will provide food, water, light, air and waste management as well as humidity and temperature control for a variety of research organisms. Operators on Earth and the crew on the ISS will be able to send commands to the laboratory equipment to monitor and control the environmental and experimental parameters inside specific habitats. Common laboratory equipment such as microscopes, cryo freezers, radiation dosimeters, and mass measurement devices are also currently in design stages by NASA and the ISS international partners.     

Ground performance of air conditioning and water recycle system for a Space Plant Box.

Researchers from 5 Japanese universities have developed a plant growth facility (Space Plant Box) for seed to seed experiments under microgravity. The breadboard model of the Space Plant Box was fabricated by assembling subsystems developed for microgravity. The subsystems include air conditioning and water recycle system, air circulation system, water and nutrient delivery system, lighting system and plant monitoring system. The air conditioning and water recycle system is simply composed of a single heat exchanger, two fans and hydrophilic fibrous strings. The strings allow water movement from the cooler fin in the Cooling Box to root supporting materials in the Plant Growth Chamber driven by water potential deficit. Relative humidity in the Plant Growth Chamber can be changed over a wide range by controlling the ratio of latent heat exchange to sensible heat exchange on the cooling fin of the heat exchanger. The transpiration rate was successfully measured by circulating air inside the Plant Growth Chamber only. Most water was recycled and a small amount of water needed to be added from the outside. The simple, air conditioning and water recycle system for the Space Plant Box showed good performance through a barley (Hordeum vulgare L.) growth experiment.     

Yohkoh observations of the solar corona

The Yohkoh soft X-ray telescope obtains several images every 90 minutes. Data from the declining phase of the solar cycle have been used to compare the X-ray signal with other indicators of activity and to study coronal heating. X-ray emission from a north polar coronal hole is found broadly consistent with results of previous EUV observations. In diffuse emission regions, temperature rises to around 2.2 MK and levels off in the height range 1.5 – 1.9 R_O. Such emission underlies streamers and may be the source of the low-speed solar wind. X-ray signatures for Coronal Mass Ejection (CME) events which involve the detection of reduced X-ray intensities in the corona, have been developed with Yohkoh data. CME observations are described     

Imaging the solar corona in the EUV

The SOHO (SOlar and Heliospheric Observatory) satellite was launched on December 2nd 1995. After arriving at the Earth-Sun (L1) Lagrangian point on February 14th 1996, it began to continuously observe the Sun. As one of the instruments onboard SOHO, the EIT (Extreme ultraviolet Imaging Telescope) images the Sun's corona in 4 EUV wavelengths. The He II filter at 304 Å images the chromosphere and the base of the transition region at a temperature of 5 − 8 × 10⁴ K; the Fe IX–X filter at 171 Å images the corona at a temperature of 1.3 × 10⁶ K; the Fe XII filter at 195 Å images the quiet corona outside coronal holes at a temperature of 1.6 × 10⁶ K; and the Fe XV filter at 284 Å images active regions with a temperature of 2.0 × 10⁶ K. About 5000 images have been obtained up to the present. In this paper, we describe also some aspects of the telescope and the detector performance for application in the observations. Images and movies of all the wavelengths allow a look at different phenomena present in the Sun's corona, and in particular, magnetic field reconnection.     

Physical properties of dust grains deduced by optical probing techniques

In-situ space observations of dust in the solar system are seldom possible. On the opposite, remote observations of solar light scattered by dust are relatively easy to perform from Earth- or satellite-based observatories; the evolution of the polarization of light scattered by dust particles as a function of the phase angle may provide information on the physical properties of these particles. Unfortunately, since remote observations are integrated along the line-of-sight of the observer, they can hardly be used to determine local physical properties. We have precisely developed Optical Probe techniques to forge the link between the numerous remote observations and the unique in-situ measurements. A short review of the remote observations of light scattered by cometary dust is first presented. Then, the Optical Probe concept is analyzed. Finally, the OPE instrument, which had been designed to optically probe the inner coma of comet Halley is described; its limitations and its achievements during Halley and Grigg-Skjellerup encounters are discussed.     

INTERBALL statistical study of ion flow fluctuations in the plasma sheet

We use ion distribution measurements with CORALL instrument on-board the INTERBALL/Tail spacecraft to study plasma flows in the mid-tail (−9> X> −27 R_E) plasma sheet. Three velocity components computed every 2 minutes exhibit two types of velocity variations: Earthward bursty bulk flows (BBFs) and random flow fluctuations. Their properties are in a good agreement with the observations of the ISEE-2 spacecraft (Borovsky et al., 1997). The INTERBALL/Tail spacecraft configuration favors measurements of V_z component, in contrast to previous experiments in which only V_x and V_y were measured reliably. In the outer part of the plasma sheet V_y and V_z fluctuations were close to each other (variances σ(V_y) and σ(V_z) were about 160 and 110 km/s, respectively), but in the inner part at the dusk flank amplitude of V_y fluctuations increased and was 2 times higher than that of V_z component. This asymmetry of fluctuations should be taken into account during modern theoretical analysis and simulations.     

Dynamic considerations for control of closed life support systems

Reliability of closed life support systems will depend on their ability to continue supplying the crew's needs in the face of perturbations and equipment failures. These dynamic considerations interact with the basic static (equilibrium) design through the sizing of storages, the specification of excess capacities in processors, and the choice of system initial state (total mass in the system). This paper uses a very simple system flow model to examine the possibilities for system failures even when there is sufficient storage to buffer the immediate effects of the perturbation. Two control schemes are shown which have different dynamic consequences in response to component failures.