求解可压缩N－S方程的无粘－粘性分数步法

用按物理过程作时间分裂的无粘－粘性分数步法求解可压缩Ｎ－Ｓ方程，无粘步用高效欧拉算法解欧拉方程，粘性步用全隐格式解抛物方程；并采取了有效措施消除由分步法产生的时间和空间不相容性，文中给出了轴对称喷管内外流场的数值模拟结果。     

浇注温度和细化剂对K4169高温合金微观组织的影响

研究了降低浇注温度或加入细化剂后 ,K4 16 9合金晶粒细化的微观组织、夹杂及缩松等的变化。发现同样加或不加细化剂条件下 ,浇注温度越低 ,一次枝晶主轴长度和二次枝晶臂距越小。而同一浇注温度下 ,化学法细晶试样一次枝晶主轴长度较普通试样的短 ,而二者的二次枝晶臂距无明显差别。晶粒细化后 ,晶粒形态由普通铸造组织中的树枝晶向细晶组织中的粒状晶转变 ,且合金中主要元素的偏析减轻 ,这均有利于提高细晶铸件机械性能。MC型碳化物和Laves相的尺寸、数量和形貌在晶粒细化前后变化不大。铸件中加入微量细化剂不形成夹杂 ,不改变合金相组成。此外 ,加细化剂不仅可使晶粒细化 ,同时铸件中的缩松大大减少     

The Genesis Solar-Wind Collector Materials

Genesis (NASA Discovery Mission #5) is a sample return mission. Collectors comprised of ultra-high purity materials will be exposed to the solar wind and then returned to Earth for laboratory analysis. There is a suite of fifteen types of ultra-pure materials distributed among several locations. Most of the materials are mounted on deployable panels (‘collector arrays’), with some as targets in the focal spot of an electrostatic mirror (the ‘concentrator’). Other materials are strategically placed on the spacecraft as additional targets of opportunity to maximize the area for solar-wind collection. Most of the collection area consists of hexagonal collectors in the arrays; approximately half are silicon, the rest are for solar-wind components not retained and/or not easily measured in silicon. There are a variety of materials both in collector arrays and elsewhere targeted for the analyses of specific solar-wind components. Engineering and science factors drove the selection process. Engineering required testing of physical properties such as the ability to withstand shaking on launch and thermal cycling during deployment. Science constraints included bulk purity, surface and interface cleanliness, retentiveness with respect to individual solar-wind components, and availability. A detailed report of material parameters planned as a resource for choosing materials for study will be published on a Genesis website, and will be updated as additional information is obtained. Some material is already linked to the Genesis plasma data website (genesis.lanl.gov). Genesis should provide a reservoir of materials for allocation to the scientific community throughout the 21st Century. This revised version was published online in August 2006 with corrections to the Cover Date.     

Huygens Probe Aerosol Collector Pyrolyser Experiment

ACP's main objective is the chemical analysis of the aerosols in Titan's atmosphere. For this purpose, it will sample the aerosols during descent and prepare the collected matter (by evaporation, pyrolysis and gas products transfer) for analysis by the Huygens Gas Chromatograph Mass Spectrometer (GCMS). A sampling system is required for sampling the aerosols in the 135'32 km and 22'17 km altitude regions of Titan's atmosphere. A pump unit is used to force the gas flow through a filter. In its sampling position, the filter front face extends a few mm beyond the inlet tube. The oven is a pyrolysis furnace where a heating element can heat the filter and hence the sampled aerosols to 250 °C or 600 °C. The oven contains the filter, which has a thimble-like shape (height 28 mm). For transferring effluent gas and pyrolysis products to GCMS, the carrier gas is a labeled nitrogen ¹⁵N₂, to avoid unwanted secondary reactions with Titan's atmospheric nitrogen. Aeraulic tests under cold temperature conditions were conducted by using a cold gas test system developed by ONERA. The objective of the test was to demonstrate the functional ability of the instrument during the descent of the probe and to understand its thermal behavior, that is to test the performance of all its components, pump unit and mechanisms. In order to validate ACP's scientific performance, pyrolysis tests were conducted at LISA on solid phase material synthesized from experimental simulation. The chromatogram obtained by GCMS analysis shows many organic compounds. Some GC peaks appear clearly from the total mass spectra, with specific ions well identified thanks to the very high sensitivity of the mass spectrometer. The program selected for calibrating the flight model is directly linked to the GCMS calibration plan. In order not to pollute the two flight models with products of solid samples such as tholins, we excluded any direct pyrolysis tests through the ACP oven during the first phase of the calibration. Post probe descent simulation of flight results are planned, using the much representative GCMS and ACP spare models. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kalman filtering with state equality constraints

Kalman filters are commonly used to estimate the states of a dynamic system. However, in the application of Kalman filters there is often known model or signal information that is either ignored or dealt with heuristically. For instance, constraints on state values (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. A rigorous analytic method of incorporating state equality constraints in the Kalman filter is developed. The constraints may be time varying. At each time step the unconstrained Kalman filter solution is projected onto the state constraint surface. This significantly improves the prediction accuracy of the filter. The use of this algorithm is demonstrated on a simple nonlinear vehicle tracking problem     

Recursive mode star identification algorithms

Star identification can be accomplished by several different available algorithms that identify the stars observed by a star tracker. However, efficiency and reliability remain key issues and the availability of new active pixel cameras requires new approaches. Two novel algorithms for recursive mode star identification are presented here. The first approach is derived by the spherical polygon search (SP-search) algorithm, it was used to access all the cataloged stars observed by the sensor field-of-view (FOV) and recursively add/remove candidate cataloged stars according to the predicted image motion induced by camera attitude dynamics. Star identification is then accomplished by a star pattern matching technique which identifies the observed stars in the reference catalog. The second method uses star neighborhood information and a catalog neighborhood pointer matrix to access the star catalog. In the recursive star identification process, and under the assumption of "slow" attitude dynamics, only the stars in the neighborhood of previously identified stars are considered for star identification in the succeeding frames. Numerical tests are performed to validate the absolute and relative efficiency of the proposed methods.     

三角翼低速动态大攻角气动特性试验研究

对后掠角分别为X=60°、70°和80°尖前缘平板三角翼模型和一个前缘后掠角为（76° 40°）的双三角翼模型在低速风洞中作大攻角俯仰摩波运动，振幅am=30°、60°和90°，缩减频率K=0.01～0.12，基于根弦长雷诺数Re=2.76×10^5～8.23×10^5。进行了六分量动态气动载荷测量，动态流动显示和70°三角翼上翼面非定常压力测量，并分别与对应的静态试验结果比较。分析了运动参数包括缩减频率、振幅和Re数、后掠角对气流动态迟滞特性的影响。     

Interacting multiple model tracking with target amplitude feature

A recursive tracking algorithm is presented which uses the strength of target returns to improve track formation performance and track maintenance through target maneuvers in a cluttered environment. This technique combines the interacting multiple model (IMM) approach with a generalized probabilistic data association (PDA), which uses the measured return amplitude in conjunction with probabilistic models for the target and clutter returns. Key tracking decisions can be made automatically by assessing the probabilities of target models to provide rapid and accurate decisions for both true track acceptance and false track dismissal in track formation. It also provides the ability to accurately continue tracking through coordinated turn target maneuvers     

Electromechanical Actuation Technology for the All-Electric Aircraft

Electromechanical actuation is a critical element that must be developed and verified to make the all-electric aircraft a viable concept. For several years the Flight Control Division of the Air Force Wright Aeronautical Laboratories has sponsored activities to demonstrate the credibility of electromechanical actuation systems (EMAS) for primary flight control actuation functions. The foundation for these EMAS activities and several electromechanical actuation development programs are described here. One involves the design, fabrication, and laboratory test of a rotary, hingeline electromechanical actuator. Another involves the development and flight test demonstration of a linear electromechanical actuator for controlling an aileron of a C-141 aircraft. A third involves the design and development of a linear electromechanical actuator for missiles having severe performance, temperature, and volumetric requirements. In addition, a brief summary of the results from two aircraft actuation trade studies compare the baseline (conventional) hydraulic flight control system with an all-electric airplane concept including quantitative comparisons of weight, reliability and maintainability, and life cycle costs.     

State Estimation and Divergence Analysis

A growing memory discrete dynamic model for performing temporal extrapolations along a predetermined path in a random field is presented. This dynamic model is used to drive a linear system that is itself driven by discrete white noise. The coupled system is used to derive a state estimation scheme that recursively processes noisy measurements of the system. In addition, using the aforementioned dynamic model as a reference (truth) model, the authors develop a covariance analysis to measure the estimation errors that occur when the dynamics along the path through the field are modeled as a Markov linear model and state estimation is performed using discrete Kalman filtering. The performance evaluation of an inertial navigation system influenced by the Earth's gravity field aboard a maneuvering ship is provided as a specific illustrative example.