Water Reservoirs in Small Planetary Bodies: Meteorites,Asteroids, and Comets

Asteroids and comets are the remnants of the swarm of planetesimals from which the planets ultimately formed, and they retain records of processes that operated prior to and during planet formation. They are also likely the sources of most of the water and other volatiles accreted by Earth. In this review, we discuss the nature and probable origins of asteroids and comets based on data from remote observations, in situ measurements by spacecraft, and laboratory analyses of meteorites derived from asteroids. The asteroidal parent bodies of meteorites formed \(\leq 4\) Ma after Solar System formation while there was still a gas disk present. It seems increasingly likely that the parent bodies of meteorites spectroscopically linked with the E-, S-, M- and V-type asteroids formed sunward of Jupiter’s orbit, while those associated with C- and, possibly, D-type asteroids formed further out, beyond Jupiter but probably not beyond Saturn’s orbit. Comets formed further from the Sun than any of the meteorite parent bodies, and retain much higher abundances of interstellar material. CI and CM group meteorites are probably related to the most common C-type asteroids, and based on isotopic evidence they, rather than comets, are the most likely sources of the H and N accreted by the terrestrial planets. However, comets may have been major sources of the noble gases accreted by Earth and Venus. Possible constraints that these observations can place on models of giant planet formation and migration are explored.     

System of maintaining the thermal regime of a space radio telescope

We present the results of developing a system of thermal regime maintenance for the onboard complex of scientific instruments of the space radio telescope installed on the Spektr-R spacecraft. The structure of the system of thermal regime maintenance is presented that includes a set of autonomous systems of constructive elements of the radio telescope. Basic schemes and composition of aggregates are presented, and main principles of operation of the autonomous systems supporting the thermal regime of the radio telescope are considered.     

New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

Homologous flare–CME events and their metric type II radio burst association

Active region NOAA 11158 produced many flares during its disk passage. At least two of these flares can be considered as homologous: the C6.6 flare at 06:51 UT and C9.4 flare at 12:41 UT on February 14, 2011. Both flares occurred at the same location (eastern edge of the active region) and have a similar decay of the GOES soft X-ray light curve. The associated coronal mass ejections (CMEs) were slow (334 and 337 km/s) and of similar apparent widths (43° and 44°), but they had different radio signatures. The second event was associated with a metric type II burst while the first one was not. The COR1 coronagraphs on board the STEREO spacecraft clearly show that the second CME propagated into the preceding CME that occurred 50 min before. These observations suggest that CME–CME interaction might be a key process in exciting the type II radio emission by slow CMEs.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

Observations of non-migrating tides and ionospheric perturbations of O(D) airglow by ISUAL instrument

In this paper, we present the spatial variations of O(¹D) airglow observed by the ISUAL (Imager of Sprites and Upper Atmospheric Lightning) instrument on board the FORMOSAT-2 satellite. With a CCD camera and a 630 nm filter, ISUAL can measure global atmospheric emissions lying between the heights of 80 and 300 km. In days of 3–6 September 2008 and 25–27 February 2009, ISUAL has measured the emissions of O(¹D) airglow with results showing strong longitudinal peak-3 and peak-4 structures. The Lomb-Scargle analyses for these two cases show periods of longitudes of 120° and 90° supporting the DE2 and DE3 non-migrating tides. The 630 nm emissions are enhanced in equatorial regions and are lying along the equator. Over Africa its intensity can sometimes increase up to 80% relative to other longitudes. The perturbation is so strong that non-migrating tides are erased. A case of bimodal distribution with strong emissions at latitudes in equator and mid-latitude in geographic coordinates was observed.     

Calculation of fast neutron removal cross sections for different lunar soils

The interaction of galactic cosmic rays (GCRs) and solar energetic particles (SEPs) with the lunar surface produces secondary radiations as neutrons. The study of the production and attenuation of these neutrons in the lunar soil is very important to estimate the annual ambient dose equivalent on the lunar surface and for lunar nuclear spectroscopy. Also, understanding the attenuation of fast neutrons in lunar soils can help in measuring of the lunar neutron density profile and to measure the neutron flux on the lunar surface. In this paper, the attenuation of fast neutrons in different lunar soils is investigated. The macroscopic effective removal cross section (_ΣR)$({\mathrm{\Sigma }}_R)$ of fast neutrons was theoretically calculated from the mass removal cross-section values (_ΣR/ρ)$({\mathrm{\Sigma }}_R/\rho )$ for various elements in soils. The obtained values of (_ΣR)$({\mathrm{\Sigma }}_R)$ were discussed according to the density. The results show that the attenuation of fast neutrons is more important in the landing sites of Apollo 12 and Luna 16 than the other landing sites of Apollo and Luna missions.     

Comprehensive data reduction package for the Immersion GRating INfrared Spectrograph: IGRINS

We present a Python-based data reduction pipeline package (PLP) for the Immersion GRating INfrared Spectrograph (IGRINS), an instrument that covers the complete H- and K-bands in one exposure with a spectral resolving power of 40,000. The reduction steps carried out by the PLP include flat-fielding, background removal, order extraction, distortion correction, wavelength calibration, and telluric correction using spectra of A type standard stars. As the spectrograph has no moving parts, the PLP automatically reduces the data using predefined functions for the processes of order extraction, distortion correction, and wavelength calibration. Before the telluric correction of the target spectra, the intrinsic hydrogen absorption features of the standard A star are removed with a Gaussian fitting algorithm. The final result is the flux of the target as a function of wavelength. Users can customize the predefined functions for the extraction of the spectrum from the echellogram and adjust the parameters for the fitting functions for the spectra of celestial objects, using “fine-tuning” options, as necessary. Presently, the PLP produces the best results for point-source targets.     

中心进气转静系转盘风阻扭矩数值模拟

采用计算流体力学(CFD)商业软件CFX从流动参数及几何结构两个方面对中心进气转静系盘腔内转盘风阻扭矩特性进行了数值模拟研究,同时搭建一个转盘风阻扭矩实验台测量自由盘风阻扭矩.中心进气转静系转盘风阻扭矩与经典经验公式进行了对比,结果表明:利用数值模拟方法,得到的无量纲扭矩系数与经典经验关系式计算得到的数据总体相差小于10%,利用湍流参数来表征转盘转速以及叠加流流量,对于分析转盘风阻扭矩非常便利.利用湍流参数定量分析时需注意叠加流以及转速的量级同样影响着风阻扭矩的数值.几何结构对于风阻扭矩也有影响,但相比流动参数影响较小.      

Inflatable composite habitat structures for lunar and mars exploration

Recent advances in materials technology have improved the performance capabilities of inflatable, flexible composite structures, which have increased their potential for use in numerous space applications. Space suits, which are comprised of flexible composite components, are a good example of the successful use of inflatable composite structures in space. Space suits employ inflatables technology to provide a stand alone spacecraft for astronauts during extra-vehicular activity. A natural extension of this application of inflatables technology is in orbital or planetary habitat structures. NASA Johnson Space Center (JSC) is currently investigating flexible composite structures deployed via inflation for use as habitats, transfer vehicles and depots for continued exploration of the Moon and Mars.

Inflatable composite structures are being investigated because they offer significant benefits over conventional structures for aerospace applications. Inflatable structures are flexible and can be packaged in smaller and more complex shaped volumes, which result in the selection of smaller launch vehicles which dramatically reduce launch costs. Inflatable composite structures are typically manufactured from materials that have higher strength to weight ratios than conventional systems and are therefore lower in mass. Mass reductions are further realized because of the tailorability of inflatable composite structures, which allow the strength of the system to be concentrated where needed. Flexible composite structures also tend to be more damage tolerant due to their “forgiveness” as compared to rigid mechanical systems. In addition, inflatables have consistently proven to be lower in both development and manufacturing costs.

Several inflatable habitat development programs are discussed with their increasing maturation toward use on a flight mission. Selected development programs being discussed include several NASA Langley Research Center habitat programs that were conducted in the 1960s, the Lawrence Livermore National Laboratory inflatable space station study, the NASA JSC deployable inflatable Lunar habitat study, and the inflatable Mars TransHab study and test program currently ongoing at NASA JSC. Relevant technology developments made by ILC Dover are also presented.