Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Visual thematic mapping from Landsat and collateral data in support of mineral development

Over the past ten years, the authors and their associates have used Landsat images and collateral data to prepare visual thematic maps. The data are used in a projection-compositor (Procom) system that enlarges Landsat images and other data to scales as great as 1:15 000. Revisions of existing maps for simple themes (e.g. topographic maps) can be completed quickly, accurately and inexpensively. Complex themes, such as geological formations and structures, can be mapped through the optical merging of collateral data sets (e.g. Landsat, geophysics, geology) at a common scale. Such mapping has led to the recognition of a non-parallactic means of obtaining whole image stereo-models with large vertical exaggerations using Landsat images.     

Microprocessor smart cards with fingerprint user authentication

Due to the great increase in Information Technology (IT) systems where user authentication is needed, security in those systems relies on using PINs or passwords. During recent years, the scientific community has been trying to improve biometric techniques to be accepted as an alternative to other user authentication schemes. One of the sectors where user identity must be verified, is the identification cards sector. In fact, if great security wants to be achieved, smart cards should be used. But cardholder verification is performed using Card Holder Verification Keys (CHV-Keys), which are PIN-based. The authors are trying to integrate fingerprint verification inside a smart card, following their works in the past. The fingerprint scheme used is shown, and the work to achieve the integration inside a commercial smart card is detailed.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Advanced optical processors for multiple degree-of-freedom objectrecognition

Several optical pattern recognition techniques suitable for multiple-degree-of-freedom object recognition are described. These include a correlator, an associate processor, and three feature extractors using moments, chord distributions, and a space-variant feature space. The processing architectures, the algorithm details, and initial results obtained for each approach are presented     

A global HF telecommand system for long duration balloon flights

An HF telecommand system for the control of long duration balloon flights at any point on the globe is described. The system proposed consists of a network of low-power transmitters operating at the same carrier frequency. The choice of transmitter frequency, power and location are presented. Control of the transmitters may be performed remotely by means of the public switched telephone network; an assessment of the error-rate in the system as a whole is given.     

The mass and helium discrepancy in massive stars: The case Vela X-1

A NLTE-analysis is presented of high S/N spectra of the optical component of the standard massive X-ray binary Vela X-1. In combination with the orbital parameters we conclude that the optical star is highly helium enriched and is significantly overluminous compared to standard evolutionary tracks of massive accretion stars. We then propose a new accretion model able to explain these features.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

An advanced flight control and navigation system implementation fortactical helicopters

US Army helicopters that will allow single-crewmember operability in tactical environments require a high degree of automation. A tightly integrated flight control and navigation system has been studied. An architecture is discussed which meets anticipated flight control and navigation requirements, at an acceptable weight, using techniques of functional and physical integration. The architecture maximizes the sharing of sensor and computational resources in a flight critical environment and uses modular equipment packaging, dual fault-tolerant tetrad ring-laser-gyro inertial measurement units, and triplex self-checking processor pair-based flight critical processing channels     

Computer analysis of the lineaments of Nepal

Various information has been obtained by computer analysis of the lineaments of Nepal. The data were carefully studied and correlated to establish the relationships of lineaments with geological units, structure, mineralization, etc. The lineament map of Nepal was prepared during 1977–1978; the lineament data were digitized in 1982—using a Hewlett Packard system 45 desktop computer—separated by area (east, central and west Nepal) and also according to geological units. By trial and error and using all variables, the different preferred orientation classes were identified for east, central and west Nepal. Lineaments were grouped according to length into less than 10 km, 10–20 km, 20–30 km and more than 30 km, for the entire country and also for major geological units, i.e., Siwalik (sub-Himalaya), Lesser Himalaya (midlands) and Higher Himalaya. Various rose diagrams and histograms showing frequency and lengths of lineaments were plotted for the different geological units and the different sectors. Lineaments associated with granites of major subdivisions were plotted separately and analysed.