地下建筑物结构裂缝控制

有效控制由于变形作用 (水化热、混凝土干缩和气温温差 )引起的结构裂缝 ,进而防止工程结构的裂漏通病 ,是一个普遍关注的技术难题。本文以广州市滨江东路隧道等工程为实例 ,从结构设计、结构与基础的共同作用、施工技术、材料优选、环境条件及信息化施工等方面 ,介绍有效控制地下结构裂缝的对策和措施     

动态三角翼的非定常气动特性和压力分布相关研究

文章介绍了不同后掠角三角翼在进行俯仰振荡时的动态压力特性,说明这种动态压力特性同三角翼的法向力的变化是密切相关的,试验研究揭示了流态、压力和气动力之间的密切关系。同时试验研究显示三角翼上翼面压力的动态变化曲线呈现出双峰形态;不同后掠角三角翼在动态试验过程中压力、法向力都具有相似特性。     

无线电遥测监视小直径刀具的工况过程

小直径刀具(φ6mm以下小钻头、铣刀)加工中产生的磨、破损信号难于检测。本文基于这一问题,研究采用无线电遥测技术来传输传感器信号,并建立了CIMS,FMS加工中心钻、铣用小直径刀具的工况监视系统。研究表明:用遥测技术传输的切削过程信息是可以用来识别刀具切削状态的;小直径刀具折断快速报警的成功率在90％以上。     

应力极值分布、强度威布尔分布的可靠性

本文运用应力—强度干涉理论,推导了应力为Ⅰ型极小值分布,强度为威布尔分布的可靠度计算公式,并对冗长的计算公式进行简化,在简化公式的基础上,运用一定的数学技巧,改变积分公式中的积分变量和上下限。将被积函数化成在某一区域内的可积函数。采用de Boor编制的一种严谨的自适应Romberg外推格式的FORTRAN程序进行数值积分。对应予不同的组合参数,给出应力服从Ⅰ型极小值分布,强度服从威布尔分布的可靠度数值。本文最后讨论了服从这两种分布的组合参数的变化对可算度数值变化的影响。     

一类统一的零(低)相关序列构造方法

基于自相关理想序列和正交矩阵建立一类统一的具有零(低)相关区的扩频序列构造方法,并对其相关特性进行分析和证明。该类方法可通过序列和矩阵的任意选取,统一地构造二元、三元、多相、复数的ZCZ(LCZ)序列集,且构造简单、形式统一,通用性更好,适用于准同步CDMA(QS-CDMA)系统。     

CAPP系统中特征造型描述法的应用

本文结合专为哈尔滨制氧机厂开发的实用型CAPP系统，对CAPP系统的研制进行了探索性的研究，该系统以Windows作为开发平台，在基于零件特征造型建模的基础上，运用面向对象编程技术完成了一个交互式信息输入子系统，实现了回转体零件CAPP系统的信息输入，这里主要介绍零件特征信息模型的建立与特征信息的数据结构。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

我国月面巡视探测器定位方法研究

月球自动巡视勘查技术中的月面巡视探测器的导航控制,需要研究月面巡视探测器的定位技术。文章通过对国外漫游车定位方法的研究,提出了我国月面巡视探测器在全局坐标系和局部坐标系中进行定位的方法。月面巡视探测器在全局坐标系中的定位可以采用星敏感器以及陆标辨识的方式;局部坐标系的定位可以采用惯性导航系统 里程计以及着陆器帮助下定位和视觉里程计的定位方法。这几种定位方式的组合应用,能够满足月面巡视探测器导航方面的定位要求。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。