Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

轴对称横向喷流强干扰流场的巨型机向量并行计算

本文在国产巨型计算机ＹＨ－１和ＹＨ－２上对ＭａｃＣｏｒｍａｃｋ显格式解轴对称横向喷流强干扰流场的计算程序进行了重构和向量优化使其能并行执行。得到该程序在ＹＨ－１上的向量加速比约为６．０，ＹＨ－２单机向量运行速度约为ＹＨ－１上的向量运行速度的３倍。与传统的串行计算相比较，并行计算大大缩短了程序运行的ＣＰＵ时间。     

ZN3火箭姿态测量用太阳角计

本文给出了用于ＺＮ３火箭姿态测量太阳角计的原理和测量结果，讨论了背景抑制和标定方法，分析了误差来源。该仪器采用选取适当探测波段和比值测量方法较好地消除了地外太阳辐照和大气消光的影响，也有效地抑制了背景辐射的干扰，大大提高了测量精度。实测结果表明，火箭姿态角测量的均方根误差约为０．７°。这一方法适用于各种自旋稳定飞行器的姿态测量。     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

态势评估领域知识的表示方法研究

从分析态势评估专家系统的结构出发,研究战场态势评估知识库的构建,进而对态势评估的领域知识进行归纳,并通过示例探讨对态势评估领域知识的表示方法,同时把可信度方法引入态势评估不确定性知识的表示,给出了复合条件可信度的计算方法。     

低温表面张力贮箱研究

对用于低温液氧推进剂的表面张力贮箱进行了理论上的初步分析，认为其在理论上是可以实现的。从低温表面张力贮箱的材料选择、低温推进剂引起的热应力及隔热层结构形式等方面进行了初步探讨。重点介绍了低温表面张力贮箱隔热层的结构形式及选用的隔热材料。分析了低温表面张力贮箱面临的特殊问题。     

ILD智能交通流量测试仪

介绍一种交通流量测试仪，它具有高灵敏度、高信噪比、传输距离远，可以准确地测量机动车、自行车流量，且成本低。由于该仪器设置了驱动变送器，采用了一种新的传输结构，引入了微机技术，模式识别等技术，从而研制出性能稳定、操作方便、实用性强且具有国际先进水平的道路交通流量测试装置。