空间交会动力学和安全模式

本文首先导出空间交会相对运动方程并给出其物理解释,然后给出动力学方程的解析解,并分析其动力学性质,最后导出不碰撞安全区和位置保持点的表达式。选择适当初始条件可以求出安全区和保持点。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

International cooperation in space — new opportunities, new approaches : An assessment

Now that the Cold War is over, the authors of this Viewpoint believe that in the interests of the USA as well as the rest of the world international cooperation should become a more fundamental element of US space policy. Cooperative agreements will not always be easy to reach and will require creative statecraft. To that end the USA should take the initiative in establishing a high-level international policy forum to facilitate discussions on the main goals and objectives to be served by international cooperation in space.     

TA15钛合金自动TIG焊工艺试验研究

探讨了TA15钛合金自动氩弧焊接工艺,采用恒流TIG焊和脉冲TIG焊,通过无损检测、力学性能试验等手段,分析了工艺参数对接头性能的影响。试验表明,TA15钛合金自动氩弧焊,焊缝外观、内部质量良好,接头抗拉强度达到基体的90%以上,且具有良好的韧性。     

大型自动化系统的供电与接地

本文是一篇关于运载火箭自动化系统和生产自动化系统的研制经验的总结报告。“供电与接地”的设计质量,不但影响系统的抗干扰特性,而且直接危及设备和人身的安全。本文概要性地论述了系统及其组成设备的供电与接地类型,供电与接地的正确方法,供电与接地在不同研制阶段中常见的错误,地线系统的设计、施工与测量方法等。