关于双向弯曲变形构件危险截面的讨论

本文通过具体例题，阐述了双向弯曲变形构件中危险截面的判定方法，论证了合成弯矩大的截面不一定是危险截面的结论。     

多孔材料挤压过程数值模拟

本文利用QFORM通用有限元软件对多孔材料挤压过程进行了数值模拟，分析了平均应力与相对密度之间的对应关系，以及初始相对密度对致密速度和挤压力的影响，可以为多孔材料的工艺设计、模具设计和制品性能控制提供理论依据。     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

化学气相反应法在C/C复合材料抗氧化处理中的应用

通过把硅蒸气渗入预制体孔隙与碳直接反应生成SiC的化学气相反应(CVR)方法,提高初始密度和预制体结构均不同的C／C复合材料的抗氧化能力,研究了C／C复合材料的密度变化与微观结构,并对其进行了氧化试验。结果表明,因CVR温度、C／C复合材料初始密度不同,抗氧化处理后的密度增加量有显著不同。针刺炭布C／C／SiC复合材料在马福炉中于1160℃经65min氧化后,其失重率仅2．6％,而密度为1．95g／cm^3的同结构C／C复合材料相在同条件下失重率高达32％。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

Influence of climatic operational conditions of a helicopter on physico-mechanical properties of composite materials

The results of numerical and experimental study of physico-mechanical properties of composite materials are proposed and variations in rigidity characteristics of the hub working part of the hingeless type within the entire range of helicopter operational temperatures are evaluated.     

科学评价党史，正确处理历史遗留问题——论邓小平指导党史研究的基本原则

本文系统阐述了邓小平同志指导党史研究、正确处理历史遗留问题的六大原则：“向前看”原则;“宜粗不宜细”原则;“有错必纠”原则;客观性原则;分析个人责任与分析复杂背景相结合的原则;总结成功经验与汲取失败教训相结合的原则。文章深入分析了上述原则的内涵、要求及其意义。     

冲击作用下弹塑性接触的耗能套筒结构的减震性能分析

求解了导弹发射筒内耗能套筒结构在冲击作用下的弹塑性接触问题。依据弹塑性有限元法,应用Lagrange乘子法引入接触区域上的位移协调约束条件,通过迭代修正使每个接触单元满足库仑摩擦律的要求,再按照Newmark β逐步积分法进行计算,求得结构的冲击响应。所得计算结果和相关实验结果吻合良好,表明所提出的计算模型和方法是正确合理的。最后将套筒结构所受的冲量和对应的位移增量进行多项式拟合,得到的拟合公式为耗能套筒结构的设计计算提供了理论依据。     

CVD过程中温度对SiC涂层沉积速率及组织结构的影响

以CH3SiCl3 H2体系在1000～1300℃沉积了SiC涂层,研究了温度对涂层沉积速率的影响,应用自发形核理论解释了不同沉积温度下CVDSiC涂层的组织结构。结果表明,随着沉积温度的提高,CVDSiC涂层的沉积速率相应增大;1000～1200℃沉积过程为化学动力学控制过程,1200～1300℃沉积过程为质量转移控制,1000℃和1100℃沉积的SiC涂层表面光滑、致密;1200℃和1300℃沉积的SiC涂层表面粗糙、多孔;随着沉积温度的提高,CVDSiC涂层的晶体结构趋于完整,当温度超过1150℃时,涂层中除β SiC外还出现了少量α SiC。