基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

Observer-type Kalman innovation filter for uncertain linear systems

An observer-type of Kalman innovation filtering algorithm to find a practically implementable "best" Kalman filter, and such an algorithm based on the evolutionary programming (EP) optima-search technique, are proposed, for linear discrete-time systems with time-invariant unknown-but-hounded plant and noise uncertainties. The worst-case parameter set from the stochastic uncertain system represented by the interval form with respect to the implemented "best" filter is also found in this work for demonstrating the effectiveness of the proposed filtering scheme. The new EP-based algorithm utilizes the global optima-searching capability of EP to find the optimal Kalman filter and state estimates at every iteration, which include both the best possible worst case Interval and the optimal nominal trajectory of the Kalman filtering estimates of the system state vectors. Simulation results are included to show that the new algorithm yields more accurate estimates and is less conservative as compared with other related robust filtering schemes     

Dose equivalent, absorbed dose and charge spectrum investigation in low Earth orbit.

Particle intensity, dose equivalent and absorbed dose have been measured on board the space shuttle Endeavour during STS-108 in December 2001 by Dublin Institute for Advanced Studies (DIAS). The dose estimates are based on very accurate measurements of recoils produced in CR-39 by cosmic ray primary and secondary protons and heavier nuclei and by secondary neutrons. The corresponding LET spectra were used to determine dose equivalent and absorbed dose values. Estimates of the total flux of Z > or = 2 nuclei have been undertaken and a preliminary charge spectrum was measured. Some comparisons are made with preliminary data obtained on STS-105 (ISS Expedition) and other missions using CR-39 detectors.     

行业标准化工作改革的探讨

通过对航空企业标准化工作现状的分析 ,并结合航空工业标准化的特点 ,提出了航空工业标准化工作在改革中应予以特别关注的几个问题。     

通用仪器接口总线标准及软件技术的发展

叙述了通用仪器接口总线标准和软件技术的现状和未来。介绍了ＧＰＩＢ、ＶＸＩ总线，程控仪器校准命令和虚拟仪器，给出了ＧＰＩＢ标准关系图，ＧＰＩＢ软件结构以及虚拟仪器框图。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

阻尼材料在飞机炮振减振上的应用

阻尼材料在飞机结构上的应用是一个新课题。在飞机炮舱区应用新型阻尼材料,组成一个全新的阻尼结构系统来吸收由航炮射击时产生的冲击能量,以实现减振的设计目的,进而改善其炮击的振动环境。通过理论计算和地面试验实测,证明了应用新型阻尼材料可使炮舱区的动应力下降近30％。     

一种新型的微机补偿晶体振荡器及开发系统

提出了一种新型的以微处理器为核心的AT切温度补偿晶体振荡器 (MCXO)的设计思想 ,说明了其开发系统的原理 ,给出了最后的实验结果。使用该开发系统得到的这种振荡器可以工作在 - 40℃～ 85℃的环境内 ,频率—温度稳定性≤± 5× 10 - 7。     

CDMA网络中CQT定点测试排除掉话故障分析

CDMA网络的建设过程中由于规划、硬件问题、软件参数设置等造成个别地区通话质量差、掉话率高等问题,网络优化人员可以通过后台参数分析、后台信令分析、现场测试等辅助手段排除网络故障。在故障发生地点通过现场定点测试定位故障是处理此类用户故障投诉的较好方法。论文尝试通过测试软件CQT定点测试法分析CDMA网络中典型掉话故障。