磁场全张量测量计算方法与误差分析

矢量磁场和磁场全张量数据是多磁源反演的数据基础。针对矢量磁场和磁场全张量的测量问题,文章提出了矩阵式矢量磁场连续扫描方法。对利用矢量磁场计算磁场全张量所用的数据结构进行了研究,应用MATLAB软件对常用的十字形和六面体两种不同数据计算结构进行了仿真分析,结果表明,两种计算结构的误差相近且均不大于10%;并分析了基线距离对磁场全张量计算的影响,结果表明,磁场全张量计算误差随着基线距离的增加而增加。     

全位置自动焊管机TIG焊电源研制

本文介绍了一种适用于管－管、管－板对接的全位置自动TIG焊晶体管电源，该电源采用可编程控制器控制，具有直流／脉冲功能，焊接参数在4个区间内可分别预测，试验表明，该电源区间过渡时电弧稳定，抗干扰能力强，焊缝均匀、连接。     

火箭发动机基于神经网络非线性辨识的故障检测

应用神经网络方法，提出了一种液体火箭发动机故障实时检测算法。神经网络采用非线性辨识技术贴近发动机的工作过程，并输出包合发动机故障信息的辨识误差信号。若辨识误差变大超过一定阈值，检测逻辑就预报发动机故障。在发动机启动阶段离线训练神经网络，在发动机稳态过程可以采用离线或在线学习算法。实验研究表明神经网络可以成功地应用于大型泵压式液体火箭发动机的故障检测。     

成分调整对DZ125合金凝固行为的影响

研究了标准成分的DZ125合金与以此为基础提高W、Al，降低Mo、Ti合金中的初生相的凝固顺序，确定了这两种合金在固-液范围内不同温度下的固-液相比例。结果表明，高W、Al低Mo、Ti合金显著缩小了合金凝固范围（Δ），使液相线温度提高了20℃，固相温度提高了70℃，并缩小失去技晶间毛细补缩能力时的温度与固相线之间的温度范围（ΔT2），从而减少了合金热裂倾向，提高了可铸性。Ti含量影响（γ＋γ'）共晶相尺寸、数量及形态，W、Wo对（γ＋γ'）共晶的数量、尺寸及形态均无影响。     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

Design and application of an Electric Tail Rotor Drive Control (ETRDC) for helicopters with performance tests

With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.     

基于IRL技术的智能采样系统设计

在模拟信号易受干扰、不稳定的环境下 ,普通的采样系统往往不能适用 ,常常会因采样不准确而导致控制电路产生错误的控制信号 ,造成系统运行故障。我们采用基于IRL技术实现的采样电路系统能通过TCP IP远程监控采样电路的状况 ,并能在采样信号出错的情况下通过硬件重构进行信号增益、滤波等处理 ,消除模拟信号因外界干扰带来的变化影响 ,IRL技术给采样系统带来了高安全、高稳定以及易维护的特性     

高精度GPS定位的精密电离层模型

在长距离GPS实时动态定位(RTK)过程中,电离层延迟误差是影响定位精度的主要误差源.目前,由于采用全空间电离层模型精度不够,对长距离RTK定位主要采用双差电离层残差内插方式.本文提出一种新的电离层模型.该模型仅对每个卫星轨迹通过的电离层部分进行建模,可适用于高精度GPS定位.采用香港数据,结果表明,该模型可较好地模拟低纬度电离层变化,并可支持GPS厘米级定位精度.     

一种无人驾驶飞机全自动着陆系统

本文介绍了无人驾驶飞机航迹控制的全自动着陆系统的设计思想和实施措施,解决如何平稳安全回收无人驾驶飞机的问题。用这种方法对高原型无人机进行了仿真,着陆性能符合要求。采用该系统的优点是不需要修改无人机自身的结构就可以自动安全着陆。     

逆向涡流发生器减小涡轮叶尖泄漏流的数值研究

逆向涡流发生器可以有效减小涡轮叶尖泄漏流,提高叶片周向载荷.对影响逆向涡流器减小泄漏流的几个关键因素进行了数值研究,结果表明:入流和出流孔径比增大,涡流器流量增加,对叶尖泄漏流的减小效果越好,孔径比2∶1时比孔径比1∶1时涡流器流量增加了24%,叶尖泄漏流量降低了0.8%,叶片周向载荷提高了1%;与叶片前缘布置涡流器相比,在叶片中后部布置时涡流器流量增大,叶片周向载荷提高;涡流器布置越密,涡流器总流量增加,布置33个涡流器比布置9个涡流器叶尖泄漏流量降低了1.6%,叶片周向载荷提高了2.7%;出流角越小,叶尖泄漏流量越小,叶片周向载荷越大,出流角30°时泄漏流量比60°时降低了1.2%,叶片周向载荷提高了约2%.