航空发动机双转子系统的拍振分析

 在双转子航空发动机中,由于转子系统不可避免地存在不平衡量,当两个转子的转速比较接近时,发动机会出现拍振现象,拍振将引起振动强度过大问题。对双转子系统的拍振进行了研究,分析了拍振的周期性、信号强度及其反向转子特性,阐明了拍振产生的机理和特征,并采用数值仿真和试验对拍振进行了定量分析和验证。研究表明,拍振与双转子转速差和不平衡量的相位因素有关,当转速差小于工作转速的20%时,双转子系统拍振信号的强度较大。     

行业标准化工作改革的探讨

通过对航空企业标准化工作现状的分析 ,并结合航空工业标准化的特点 ,提出了航空工业标准化工作在改革中应予以特别关注的几个问题。     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Data path synthesis in digital electronics. I. Memory allocation

A data path consists of memory elements (i.e., registers), data operators (i.e. ALUs) and interconnection units (i.e. buses) to control the data transfers in the digital system. Many approaches to hardware allocation for data path synthesis have been proposed in the literature; however, only single-port memory is considered for register allocation and no efficient synthesis approach for multiport memory synthesis. A novel design methodology for data path synthesis using multiport memories is proposed which can be applied to hardware allocation algorithms or to already synthesized data path as a postprocessor to achieve a better design. Illustrations of applying this method to different synthesis examples are presented. Results and improvements over previous techniques are demonstrated. Experiments on benchmarks show very promising results     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

300 MVA脉冲发电机组滑差方式起动过程研究

介绍了300 MVA脉冲发电机组的滑差装置。对机组采取滑差方式的起动过程进行了分析和等效建模。根据机组实际起动过程电气波形,利用非线性规划模型,建立了滑差装置液体电阻等效仿真模型,并代入机组参数对起动过程进行仿真,仿真结果和实际波形吻合,验证了模型的正确性。在此基础上,为了使机组的转速达到额定转速,提出在滑差装置液体电阻低位时并入两级固体金属电阻后短接的方案,给出了两级固体金属电阻的阻值等理论参数,并通过仿真验证了方案的可行性。建立的仿真模型可以作为研究不同参数、不同控制策略下的机组起动过程动态特性的重要工具。     

利用几何遗传方法优化前缘翼根延伸的外形以增强飞行器升力系数和机动性

为了提高所选定飞行器模型的机动性,采用了一种标准遗传算法设计前缘翼根延伸(LEX).同时使用一种由三维低阶板方法结合DATCOM方法半经验公式的改进方法预测复杂外形飞行器(机身 机翼 尾翼)的空气动力载荷和最大升力系数.结果表明,在前缘翼根存在的情况下,升力系数在马赫数为0.4～0.8时提升了20.5%～15.3%,在马赫数为1.2时提升了6.8%,在马赫数为0.2～0.95之间升力系数最大值提升了9.5%～15%.在1～5 km的高度亚音速飞行时,其回转率得到了6.6%～8.0%的提升.     

基于鲁棒自适应控制策略的混合型步进电机低速伺服控制性能

针对混合型步进电机低速运行状态下脉动转矩较大的特点,应用鲁棒自适应控制策略来设计其低速伺服控制器,以实现高精度的跟踪控制性能.首先,根据混合型步进电机转矩形成的机理,揭示了其固有的脉动转矩对低速运动控制产生不利影响的动力学特征,并将它归结为两种结构不确定性,便于控制器的设计;其次,采取标准的自适应控制及其鲁棒化设计思想,借助于μ-修整策略来实现相应的控制律,确保脉动转矩的最大化补偿及伺服系统低速跟踪控制满足高性能的要求;最后对所建立的低速跟踪控制系统的性能进行了试验评估,并与作者前期的工作进行了比较,试验结果验证了其有效性与可行性.     

固体火箭发动机喷管座和壳体接头组合结构的优化设计

本文采用准则法和数学规划法相结合的方法成功地解决了固体火箭发动机喷管座和壳体接头组合结构的优化设计问题,为减轻结构质量,为寻求喷管座最佳型面和尺寸提供了有价值的方法和结论。以现有某结构为例,经过优化设计,质量降低 16.35%,明显地提高了发动机质量比。