成分调整对DZ125合金凝固行为的影响

研究了标准成分的DZ125合金与以此为基础提高W、Al，降低Mo、Ti合金中的初生相的凝固顺序，确定了这两种合金在固-液范围内不同温度下的固-液相比例。结果表明，高W、Al低Mo、Ti合金显著缩小了合金凝固范围（Δ），使液相线温度提高了20℃，固相温度提高了70℃，并缩小失去技晶间毛细补缩能力时的温度与固相线之间的温度范围（ΔT2），从而减少了合金热裂倾向，提高了可铸性。Ti含量影响（γ＋γ'）共晶相尺寸、数量及形态，W、Wo对（γ＋γ'）共晶的数量、尺寸及形态均无影响。     

用凝固模拟方法预测铝合金铸件缩松的形成

用有限元法和六节点等参数单元对铝合金金属型铸造过程进行了温度场的数值模拟，对铸件不同典型部位进行了金相分析，结果表明，参数Ｇ／可有效地预测铝合金缩松形成倾向的大小，计算值与实测值基本一致。     

双向进气结构脉管制冷机直流形成机理

在脉管制冷机中,由双向进气结构诱发的直流流动,不仅会增加冷端换热器的负载,降低制冷机性能,而且还是引起制冷温度不稳定的重要原因。如何有效地抑制直流流动已成为脉管制冷机能否大规模应用的关键。而对直流形成机理进行全面、深入的研究是发展简单、有效直流抑制手段的前提。针对该研究热点,本文开展了双向进气结构脉管制冷机直流形成机理研究,基于流体网络理论,考察工质物性对直流的影响和作用机理,进一步揭示了直流的形成本质。     

On suboptimal detection of 3-dimensional moving targets

The author designates matched filters that are completely characterized by the velocity of the target as assumed velocity filters (AVFs). Like most matched filtering techniques where the signal parameters range in a continuum, the AVF must be implemented suboptimally by partitioning the velocity space. The author investigates the possibility of using a signal-to-noise ratio (SNR) loss factor as the criterion for the partition. The loss factor is a measurement of the loss of SNR at the output of the matched filter due to mismatch of filter parameters. In the scenario of detecting a moving satellite from a ground-based sensor, because of the vast sky the sensor has to search, it is important to keep the number of filters minimal. The author shows that, with a fixed loss factor, the number of filters required for coverage increases linearly as the span of the two-dimensional velocity space increases quadratically. The rate of increase is further reduced when the loss factor is made proportional to expected target angular speed     

巨型晶闸管在大型直流电动机拖动中的应用

巨型晶闸管在国内首次成功地用于大型风洞的动力系统──大型直流电动机拖动系统中，使大型直流拖动的控制系统简化，１０００—３０００ｋＷ系统简化到一个三相全控桥式整流电路，或两个三相全控桥式整流电路并联输出的技术问题上，而且由于系统简单化，潜在的故障因素减少，可靠性增强，维护的工作量也大大减少。本文介绍风洞动力控制系统的实用调速方法，以及用计算机控制速压的方法。     

JJ—7飞机对大气紊流的横航向响应及乘座品质计算

本文对JJ-7飞机的横航向晴空大气紊流响应及乘座品质进行了计算.计算结果表明,JJ-7飞机的横航向大气紊流响应值不大,乘座品质基本上满足要求,可以为飞行员接受.     

小展弦比飞机非线性气动特性风洞与飞行相关性研究

在较大迎角范围，如何由风洞试验数据预计全尺寸小展弦比飞机的非线性气动特性，并与飞行值相关，始终是国际航空界致力解决的重大问题，本项研究采用风洞试验与工程计算相结合的方法，对支架，洞壁、进气，喷流，雷诺数及静弹性等影响相关性的诸因素予以修正，并计及配平影响，从而比较准确地预计出全尺寸收音机的非线性气动特性，预计值与试飞值相比较结果验证了本项研究的可靠性和实用性。     

机床实体模型复模态空间动位移显示技术的研究

介绍了用实体模型在复模态空间显示机床整机动位移的原理和方法。并在VC++6.0开发平台上用OpenGL语言开发了相应软件。解决了以往同类软件动画效果不能真实地表现实际机床整机的动态位移情况的难题。     

Designing space vehicle shields for meteoroid protection: A new analysis

Dual-layer meteroid shields consisting of sacrificial bumper plates spaced some distance outboard from the vehicle hull are the most effective structures yet conceived for protecting space vehicles from supervelocity meteroid impacts. This paper presents a new analysis for designing dual-layer shields. The analysis is based upon energy and momentum conservation, fundamental electromagnetic radiation physics, and observation of results from extensive experimental impact investigations conducted at relatively low velocities (near 7 km/s). One important conclusion is that most of the kinetic energy of a meteoroid striking a dual-layer shield is expended as radiation at the stagnation zone on the face plate of the underlying structure. The analysis includes systematic procedures to evaluate the response of shield designs for a given impact threat. Similar applications of the analysis can be used to support a mathematically rigorous procedure for optimum shield design. The research described here supported the Halley Intercept Mission Project at the Jet Propulsion Laboratory, C.I.T., under Contract No. NAS 7–100, sponsored by the National Aeronautics and Space Administration.