Electron density inversed by plasma lines induced by suprathermal electron in the ionospheric modification experiment

Incoherent scatter radar (ISR) is the most powerful ground-based measurement facility to study the ionosphere. The plasma lines are not routinely detected by the incoherent scatter radar due to the low intensity, which falls below the measured spectral noise level of the incoherent scatter radar. The plasma lines are occasionally enhanced by suprathermal electrons through the Landau damping process and detectable to the incoherent scatter radar. In this study, by using the European Incoherent Scatter Association (EISCAT) UHF incoherent scatter radar, the experiment observation presents that the enhanced plasma lines were observed. These plasma lines were considered as manifest of the suprathermal electrons generated by the high-frequency heating wave during the ionospheric modification. The electron density profile is also obtained from the enhanced plasma lines. This study can be a promising technique for obtaining the accurate electron density during ionospheric modification experiment.     

微藻反应器用于水气净化与产氧的功能验证

将微藻和电去离子技术引入密闭生态系统,设计单元反应器旨在验证其在空气再生、水净化和潜在食物的生产。在反应器中对尿液进行消解和NH4＋硝化转化得到超过90%NH4＋-N硝化为NO-3-N-的培养液适宜于螺旋藻养殖并获得高质量的微藻生物量;此时,CO2的平均吸收速率VCO2=458.6 mL/m3·min、O2产生速率VO2=616.5 mL/m3·min,即螺旋藻的同化系数VCO2/VO2≈0.74,接近人的呼吸系数VCO2/VO2=0.86;EDI法水净化率97%可直接回用。结果表明：该体系能实现CO2吸收、O2释放和螺旋藻生物量的生产,同时将水净化。     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

飞机锁类机构性能退化可靠性分析方法综述

随着航空航天装备的快速发展,对飞行器装备的可靠性要求逐渐提高,飞机锁类机构的可靠性对飞机起降的安全至关重要。以飞机舱门锁机构为研究对象,首先通过文献调研了大量舱门锁机构并分析了锁机构的特点和失效模式,阐述了锁机构的工作原理。其次综述了锁机构失效机理建模、机构渐变损伤的研究现状以及目前存在的问题,分析了国内外有关锁机构可靠性的研究现状;并针对多连杆机构可靠性分析和锁机构可靠性分析进行了分类梳理。最后对锁机构的可靠性分析研究思路进行总结,并对目前复杂锁机构的可靠性分析存在的问题及其研究趋势进行了展望。     

固体火箭发动机专用ICT机械扫描系统

以成熟的组合精密镗床为本体, 研制了固体发动机专用ＩＣＴ机械扫描系统。采用４５０ ｋＶ Ｘ射线源, 设计了准直器系统、探测器系统、机械扫描系统（传动控制系统、夹具及同步台）, 实测证明扫描系统符合精度要求     

推进剂药浆混合均匀性研究

用Ｈａａｋｅ流变仪研究了高固体含量丁羟推进剂的混合均匀性,提出了用复合粘度和复合模量作混合均匀性表征参数的评价方法。研究结果表明,高固体含量丁羟三组元配方的预混阶段需１５ｍｉｎ～２０ｍｉｎ快速混合,总预混时间以３０ｍｉｎ～３５ｍｉｎ为宜。     

Y7-200A飞机自然结冰飞行试验

介绍了Ｙ７－２００Ａ飞机防冰除冰系统,自然结冰飞行试验所需气象专用设备和机场气象条件的选择以及自然结冰的飞行安全。同时还介绍了飞行试验的内容、试验方法及试验结果,并对试验结果进行了分析,试飞结果表明,带自然积冰飞机性能比带模拟冰型的好,自然结冰试验与模拟冰型试验之间的飞机操纵特性没有不可接受的差异,飞机飞行品质良好。可供运输类飞机自然结冰飞行试验时参考。     

实现交互式三维参数化造型的研究

参数化设计方法是当今计算机辅助设计领域的一个热点课题,交互式三维参数化造型可以在原有模型的基础上,快速而方便地生成新的设计方案,大大提高了设计效率。本文所讨论的是通过引入特征的约束关系,利用现有的实体几何造型系统来实现交互式的三维参数化造型的方法。     

动态信号检测振动攻丝刀具磨损研究

分析了动态切削力研究的理论依据及在计算机中的实现方法;研究了振动攻丝动态攻丝扭矩与丝锥磨损的关系;提出了在频域内采用动态攻丝扭矩主要峰值频率的功率值实时检测丝锥磨损的方法。