机场终端区着陆次序的排序规划算法

讨论了机场终端区飞机到达流的排序规划问题。为了能够在终端区交通繁忙的情况下高效地为到达的飞机流安排合理的着陆次序,并在不违反飞机间距要求的情况下给出各飞机经过优化的着陆时间,提高机场跑道的利用率,提出了经过改进的先来先服务、带有时间提前量、带有约束的位置偏移三种排序算法。当进入机场终端区的飞机数量超过机场终端区的容量时,分航路对飞机排队并对飞机间的距离进行限制     

重复率电光调Q Nd3+:YAG激光器输出能量及激光器效率的测定

本文提出了一种在不同的泵浦电压下测量重复率电光调Q掺钕钇铝石榴石激光器输出能量的方法 ,实际测量了脉冲激光器静态输出和动态输出能量 ,并利用电光晶体激光调Q技术得到脉宽为亚毫微秒的激光脉冲 ,使得激光器动态输出功率达兆瓦量级     

关于工业机器人运动学反问题的两种解法

本文发展了求解工业机器人运动学反问题的两种新方法:几何法和迭代法,分别适用于可解和不可解工业机器人的工作空间综合。     

平方阻尼在非线性缓冲系统中的作用

本文讨论平方阻尼(以参数a表征)在图(1)所示的缓冲系统中的作用,结果表明:平方阻尼对于降低相对位移峰值d_m总有良好的效果,但不一定降低加速度峰值a_m。在一定速度冲击V下,系统的平方阻尼有两种最佳值,使a_m最小的a_(am)和使缓冲效率γ最高的a_(cm),而平方阻尼最佳条件依赖于系统的缓冲弹簧的刚度变化类型: (1)线性弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中均匀减速; (2)渐硬弹簧情况:a_(am)=a_(cm),最佳条件为系统在首程中初始和终末加速度相等即; aV~2=ω_0~2q(dm) (3)渐软弹簧情况:a_(cm)>a_(am)。 本文的基础是所谓“首程显峰”,假定即系统在速度冲击V下的响应峰值d_m和a_m出现在第一行程中。当平方阻尼值不太小,缓冲弹簧刚度特性接近反对称时,该假定成立。     

火星探测着陆系统开伞控制方法研究

文章通过对火星探测进入轨道的分析，提出了一种以动压为控制目标的开伞控制方法，并借鉴过载-时间控制法的相关思想，结合火星探测进入轨道的特点，研究了该开伞控制法的原理和实现方法。根据火星探路者的实际进入条件，采用该方法的分析结果与实际飞行中的开伞情况基本吻合。     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

基于锥形压入的材料力学性能测试方法研究

通过压入测试以获取工程服役结构、小型构件和焊接结构焊缝过渡区的材料单轴本构关系参数,且根据材料本构关系参数来估算材料的压入硬度对于工程设计和安全评估有重要意义.对于幂律材料,本文依据锥形压入试验原理和弹塑性接触有限元分析(EPFEA),揭示了不同锥角的锥形压头其压入能量比与屈服应力之间存在线性关系,提出了基于能量原理预测金属材料本构关系部分关键参数(弹性模量、屈服应力和硬化指数)的CR-EMI (Constitutive Relationship based on Energy Method of Indentation)方法.同时,基于此种线性关系提出了由Hollomon本构关系模型参数预测硬度的H-EMI(Hardness based on Energy Method of Indentation)方法.通过对多种金属材料进行压入试验和有限元分析,验证了CR-EMI方法和H-EMI方法的有效性与精确性.     

缝隙间隙密封在阀设计中的运用

在某型飞机使用的阀中采用了缝隙间隙密封,依据计算、设计和试验阐述了泄漏量与压力、间隙尺寸、粘度及材质的关系。当间隙尺寸确定时,粘度越大,压力越小,材质越硬,则泄漏量越小,即阀在采用缝隙间隙密封时,泄漏量与工作介质的种类有关,每种工作介质粘度不同,泄漏量也不同,阀体材质越密,抗泄漏越好。因此,应尽量选择粘度系数大的介质和材质较密的材料。     

Capillary flow rate limitation in asymmetry open channel

This paper focuses on the stability of capillary forced flow.In space,open capillary channels are widely used as the liquid and gas separation devices to manage liquid positioning and transportation.Surface collapse happens when the flow rate exceeds the critical value,leading to a failure of propellant management.Knowledge of flow rate limitation is of great significance in design and optimization of propellant management devices(PMDs).However,the capillary flow rate limitation in an asymmetry channel has not been studied yet in the literature.In this paper,by introducing an equivalent angle to convert the asymmetry corner to a symmetry one,the one-dimensional theoretical model is developed.The flow rate limitation can then be investigated as a function of the channel geometry as well as liquid property based on the model.Comparisons between the asymmetry and symmetry channels bring forth the characteristics of the two kinds of channels,and demonstrate good accordance between the new advanced model and the existing one in the literature.This theoretical model can provide valuable reference for PMD designers.     

压力管道流固耦合振动特性分析

压力管道系统中存在流体和结构之间的耦合振动。因此,在研究压力管道的动态特性时,应考虑管内流体对管道结构动态特性的影响。本文以某动力系统空间管路为研究对象,采用Galerkin法对导管-流体组成的耦合系统进行有限元离散,建立耦合系统控制方程。在此基础上,用考虑初应力刚度的有限元法,对导管充压前、后的振动特性进行了数值计算,详细分析了流固耦合作用对导管结构振动特性的影响,并与试验结果进行了比较分析。结果表明,流固耦合作用对导管模态振型的影响很小,但对导管各阶固有频率有不同程度的影响。