BP网络进行0-9十个数字图像的识别

在BP算法和数字图像处理技术的基础上,本文在MATLAB软件环境下提取Word文档中26种字体的0-9十个数字的图像,使用MATLAB神经网络工具箱及图像处理工具箱进行数字的识别,给出了较详细的处理步骤及相关程序,并比较了各种识别算法的收敛速度和识别率。     

On the Acquisition Time for an Apollo Ranging Code

An Apollo ranging system is considered whose phase reference is obtained by a phase-locked loop for bit synchronization. The bit phase reference is noisy, and the error probability for the ranging code is shown to depend on the input signal energy per bit to noise density ratio. The procedure of computing the acquisition time for the ranging code is then presented and the acquisition time for a lunar ranging code is plotted versus the input signal-to-noise density ratio.     

空间电子攻击的体系作战效用及发展对策

通过分析空间电子攻击在打击对象多、方式灵活多样,打击速度快、隐蔽突然,效果等同于火力打击、太空安全隐患小等方面的优势,得出了"空间电子攻击具有很大的发展潜力,是未来空间对抗力量发展的重心"的结论。通过分析空间电子攻击在遮态势感知耳目、断信息分发链路、破精确打击能力、实施战略威慑方面发挥体系作战效用的机理,论证了空间电子攻击的体系作战效用。通过分析还提出空间电子攻击力量的发展对策。     

战术导弹的一种自校正控制

本文探讨自校正控制理论在战术导弹控制中的应用。采用一种渐近的最小方差自校正控制方案设计导弹自动驾驶仪回路。该方案通过设计自校正控制器的极点和可调增益,使控制器稳定,并能兼顾闭环系统的动态特性,也可使输出方差趋于最小。在两种参考输入信号情况下进行仿真,结果表明,与经典控制情况相比,该方案具有较强的抑制干扰能力,能克服参数变化对系统控制性能的影响,提高了系统的跟踪性能。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

CASC Imposing Space Missions in 2012

2012 was an impressive year for China’s space industry. Multiple national space programs proceeded well and as one of world’s well known rockets, the LM launch vehicles conducted 19 missions and sent 28 satellites/ spaceship into their preset orbits in 2012. All these spacecraft had been delivered to the customers for operation. CASC vice president Yuan Jie introduced the CASC space missions of 2012 when interviewed by Aerospace China.     

吊挂系统对波瓣混合排气系统气动热力性能影响

为了明确短舱中吊挂系统的堵塞效应对波瓣混合排气系统气动热力性能的影响,采用数值模拟的方法对包含吊挂的混合排气系统进行了定量研究。研究结果表明,受吊挂系统的影响,在波瓣混合排气系统混合段内,存在着一大尺度的回流区,其作用范围随吊挂长度的增加而增加。在性能参数方面,与未考虑吊挂系统时相比,考虑吊挂之后,虽然混合排气系统出口处热混合效率以及推力系数下降很小,最大降幅仅分别为0.017和0.01,但总压恢复系数却显著下降,最大降幅达到了0.03。此外,随着吊挂系统长度的变化,排气系统出口处的热混合效率、总压恢复系数以及推力系数变化幅度小于0.01,变化很小。     

A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.