空间电子攻击的体系作战效用及发展对策

通过分析空间电子攻击在打击对象多、方式灵活多样,打击速度快、隐蔽突然,效果等同于火力打击、太空安全隐患小等方面的优势,得出了空间电子攻击具有很大的发展潜力,是未来空间对抗力量发展的重心的结论。通过分析空间电子攻击在遮态势感知耳目、断信息分发链路、破精确打击能力、实施战略威慑方面发挥体系作战效用的机理,论证了空间电子攻击的体系作战效用。通过分析还提出空间电子攻击力量的发展对策。     

改进DZ—22定向凝固高温合金热处理制度的研究

研究了一种新的热处理制度对DZ－22走向凝固高温合金组织和性能的影响。结果表明，采用新热处理制度先进行预处理，可以消除低熔点相，提高合金的初熔温度，然后提高合金的固溶温度。在随后的冷却和时效过程中，析出更多的细小γ'相使合金的拉伸强度和持久性能得到明显提高。     

碱金属引射对尾流化学动力学和电子密度的影响

用把碱金属（Na）加入到空气尾流中进行数值模拟的方法,研究了碱金属引射对高超声速尾流化学动力学和电子密度的影响。采用的化学反应模型为包括O2、N2、O、N、NO、NO＋、Na 、Na、O2-及e-的10组元模型。计算结果表明,碱金属引射,使尾流电子数密度增加1～3个量级。计算结果与文献中的数据符合较好。     

单晶高温合金接近使用条件下的寿命估算与损伤分析

针对发动机热端部件承受的典型载荷谱，发展了一种通用的寿命预测方程和损伤分析方法。这个方法是在疲劳蠕变交互作用断裂特征图及其最大应力修正的寿命方程基础上建立的。根据ＤＤ３单晶合金的疲劳蠕变交互作用断裂特征图及其最大应力修正的寿命方程，验证了本方法是切实可行的。预测精度是符合要求的。     

Aircraft Engine Gas Path Fault Diagnosis Based on Hybrid PSO-TWSVM

Twin support vector machine(TWSVM)is a new development of support vector machine(SVM)algorithm.It has the smaller computation scale and the stronger ability to cope with unbalanced problems.In this paper,TWSVM is introduced into aircraft engine gas path fault diagnosis.The generalization capacity of Gauss kernel function usually used in TWSVM is relatively weak.So a mixed kernel function is used to improve performance to ensure that the TWSVM algorithm can better balance a strong generalization ability and a good learning ability.Experimental results prove that the cross validation training accuracy of TWSVM using the mixed kernel function averagely increases 2%.Grid search is usually applied in parameter optimization of TWSVM,but it heavily depends on experience.Therefore,the hybrid particle swarm algorithm is introduced.It can intelligently and rapidly find the global optimum.Experiments prove that its training accuracy is better than that of the classical particle swarm algorithm by 5%.     

Charged-particle mutagenesis II. Mutagenic effects of high energy charged particles in normal human fibroblasts.

The biological effects of high LET charged particles are a subject of great concern with regard to the prediction of radiation risk in space. In this report, mutagenic effects of high LET charged particles are quantitatively measured using primary cultures of human skin fibroblasts, and the spectrum of induced mutations are analyzed. The LET of the charged particles ranged from 25 KeV/micrometer to 975 KeV/micrometer with particle energy (on the cells) between 94-603 MeV/u. The X-chromosome linked hypoxanthine guanine phosphoribosyl transferase (hprt) locus was used as the target gene. Exposure to these high LET charged particles resulted in exponential survival curves; whereas, mutation induction was fitted by a linear model. The Relative Biological Effect (RBE) for cell-killing ranged from 3.73 to 1.25, while that for mutant induction ranged from 5.74 to 0.48. Maximum RBE values were obtained at the LET of 150 keV/micrometer. The inactivation cross-section (alpha i) and the action cross-section for mutant induction (alpha m) ranged from 2.2 to 92.0 micrometer2 and 0.09 to 5.56 x 10(-3) micrometer2, respectively. The maximum values were obtained by 56Fe with an LET of 200 keV/micrometer. The mutagenicity (alpha m/alpha i) ranged from 2.05 to 7.99 x 10(-5) with the maximum value at 150 keV/micrometer. Furthermore, molecular analysis of mutants induced by charged particles indicates that higher LET beams are more likely to cause larger deletions in the hprt locus.     

碳纤维用PAN原丝超声波水洗新技术

为降低PAN原丝中的DMSO(二甲基亚砜)残留量,减少其对原丝的拉伸、预氧化处理等过程的不利影响而造成的碳纤维的结构缺陷、强度降低,将超声波水洗技术应用到PAN原丝水洗工艺中.结果证明,新方法明显提高了水洗效果,能够快速有效地降低原丝中DMSO残留量.     

C/C复合材料表面烧蚀细观形貌损伤分析

基于C/C复合材料烧蚀表面细观形貌和细观结构上的流场分布规律研究,着重分析了微裂纹尺寸对C/C复合材料中Z向纤维和基体界面上因变温引起的开裂损伤的影响,给出了微裂纹随温度变化的扩展规律及微裂纹特征尺寸随温度变化的表达式;提出了在高温下因变温而造成的损伤模型,为C/C复合材料结构烧蚀计算提供了一种基础性理论。研究结果表明,高温下变温会引起C/C复合材料力学性能的劣化。     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.