卫星无线传能系统主动电场屏蔽效能分析

针对无线传能系统宽频段电场辐射屏蔽的需求,建立了采用主动屏蔽方式的无线传能系统屏蔽效能分析电路模型。推导出主动屏蔽激励源可由无线传能系统电压激励源控制。给出了空间点位置和面位置屏蔽效能计算公式,通过对激励电压源进行傅里叶变换后提取关注频段电压分量可实现对宽频段屏蔽效能的分析。通过仿真分析证明了方法的有效性,屏蔽效能与空间位置有关,同时受限于传输效率的约束。通过调节压控电压源的压控系数可以在传输效率损失相对较小的情况下实现关注位置电场辐射的有效屏蔽。最后通过实验验证了无线传能系统主动屏蔽方式屏蔽效能分析方法的正确性和工程可应用性。     

Comparison of Ionospheric Total Electron Content (TEC) over Sonmiani (Pakistan) with NeQuick-2 and IRI-2012 during July 2014 – June 2015

In this study, Total Electron Content (TEC) observations acquired by a GNSS receiver installed at Sonmiani (Geog. Coord. 25.19°N, 66.74°E, Geomag. Coord. 17.62°N, 141.5°E) are being reported for the first time. The data utilized is hourly instantaneous TEC values during 10 International Quiet Days (IQDs) per month from Jul-14 to Jun-15, totaling 120 observation days for monitoring nominal TEC. The findings confirm the semi-annual trend of TEC over Sonmiani, which lies at the northern crest of Equatorial Ionization Anomaly (EIA) region. The TEC measurements are then compared with NeQuick-2 and International Reference Ionosphere (IRI-2012) models. It was found that the TEC values derived from NeQuick-2 are in better agreement with GNSS measurements than those from IRI-2012. The TEC measurements also show seasonal variation which is largest during Equinox months. The TEC value in Dec solstice is higher than the Jun solstice, which confirms that the seasonal anomaly is playing a major role in this region during the course of study.     

Compensation of base disturbance using optimal trajectory planning of dual-manipulators in a space robot

This paper presents a trajectory planning algorithm for a space robot with dual-manipulators. Here one manipulator of the space robot captures a target, and another manipulator is free. In this case, this study uses one manipulator as the mission manipulator to capture the target, and another as the balance manipulator aiming at the compensation of the pose disturbance. For this method, a novel trajectory planning algorithm applied to the balance manipulator is presented. The trajectory planning problem is transformed into series of problems of the optimal state solution, and then the iterative algorithms for the trajectory planning are designed. In the iterative algorithms, the bias force on the spacecraft base caused by the balance manipulator is used as the compensation force. Then, to calculate the expected compensation force and torque, a pose control law for the spacecraft base is introduced. The expected compensation force and torque provide equality constraints for optimization problems, which implies that the trajectory planning algorithm compensates for not only the disturbance generated by the manipulator’s motion, but also environmental disturbances. This is because the expected compensation force and torque depend on the pose change of the spacecraft base rather than the type of the disturbance. Numerical simulation was carried out to analyze the proposed trajectory planning method. It was observed that the method greatly reduces the disturbance of Manipulator A on the spacecraft base. These results validated the effectiveness of the proposed method for the trajectory planning to make the spacecraft base disturbance up to minimum.     

Inter-satellite calibration of FengYun 3 medium energy electron fluxes with POES electron measurements

We perform an L-shell dependent inter-satellite calibration of FengYun 3 medium energy electron measurements with POES measurements based on rough orbital conjunctions within 5?min?×?0.1?L?×?0.5 MLT. By comparing electron flux data between the U.S. Polar Orbiting Environmental Satellites (POES) and Chinese sun-synchronous satellites including FY-3B and FY-3C for a whole year of 2014, we attempt to remove less reliable data and evaluate systematic uncertainties associated with the FY-3B and FY-3C datasets, expecting to quantify the inter-satellite calibration factors for the 150–350?keV energy channel at L?=?2–7. Compared to the POES data, the FY-3B and FY-3C data generally exhibit a similar trend of electron flux variations but more or less underestimate them within a factor of 5 for the medium electron energy 150–350?keV channel. Good consistency in the flux conjunctions after the inter-calibration procedures gives us certain confidence to generalize our method to calibrate electron flux measurements from various satellite instruments.     

基于导师科研团队的研究生培养模式探究

本文探讨了基于导师科研团队的研究生培养模式的作用和意义,提出了构建基于导师科研团队的研究生培养模式的主要内容以及关键问题,并对这种培养模式的建立提出了一些想法。     

一种面向在轨服务的空间遥操作人机交互方法

为了解决人在遥操作回路中,人与操作目标时空隔离、缺乏环境信息和天地回路大时延等实际问题,以及减少空间机器人缺乏自主智能性和操作者手抖颤等不利因素,针对空间在轨服务操作交互问题,提出一种基于增强虚拟安全通道(AVSC)的分层辅助遥操作(LAT)方法。首先,设计组合体增强虚拟安全通道,通过给主端操作者施加虚拟引导力辅助完成操作任务,与徒手操作相比,操作时间短、操作平稳;其次,设计分层辅助遥操作系统,通过获取空间机器人末端与期望轨迹上最近点之间的距离,在安全通道内划分不同的虚拟力场,辅助操作者更加灵活地操作。演示实验表明,该方法利用力触觉和视觉信息,引导操作者控制空间机器人末端运动至期望位置,可以有效地提高操作精度、减轻操作者心理压力和减少操作时间。     

区域安全性分析在飞机总装过程中的应用探索

区域安全性分析(ZSA)是指为降低飞机机载系统在整机装配、维护等物理性集成时引起的飞机系统、飞机整机工作过程中的功能性风险,而在传统飞机物理样机阶段提前开展的结构与系统、系统与系统间协调性、技术符合性的分析检查工作.随着数字化设计模式的引入,部分区域安全性分析也尝试在设计阶段基于设计数字样机开展.在民用飞机设计领域,国...     

基于弱耦合的翼伞气动变形数值模拟

对不带气室翼伞和带气室翼伞的气动特性和结构变形进行三维数值模拟,分析气室对翼伞气动特性和结构变形的影响.流场方面,采用有限体积法求解Navier-Stokes控制方程,选用剪切应力输运(SST,Shear-Stress Transport)k-ω湍流模型;结构方面,假定翼伞有初始形状,使用插值方法映射传递流固交界面的压力数据,通过ANSYS计算翼伞伞衣的气动变形.结果表明:气室对阻力影响不大,对升力的影响主要表现在大迎角情况下;翼伞柔性和尺寸大小对其有利迎角的范围影响不大;翼伞的气动变形和最大主应力主要集中在气室中前部分,带气室翼伞由于有肋片加强的缘故,伞衣气动变形较小,一定程度上保证了翼伞的气动特性.     

Numerical investigation on jet interaction with a compression ramp

A numerical investigation on jet interaction in supersonic laminar flow with a compres- sion ramp is performed utilizing the AUSMDV scheme and a parallel solver. Several parameters dominating the interference flowfield are studied after defining the relative increment of normal force and the jet amplification factor as the evaluation criterion of jet control performance. The computational results show that most features of the interaction flowfield between the transverse jet and the ramp are similar to those between a jet and a flat plate, except that the flow structures are more complicated and the low-pressure region behind the jet is less extensive. The relative force increment and the jet amplification factor both increase with the distance between the jet and the ramp shortening till quintuple jet diameters. Inconspicuous difference is observed between the jet-before-ramp and jet-on-ramp cases. The variation of the injection angle changes the extent of the separation region, the plateau pressure, and the peak pressure near the jet. In the present computational conditions, 120 is indicated relatively optimal among all the injection angles studied. For cold gas simulations, although little influence of the jet temperature on the pressure distribution near the jet is observed under the computation model and the flow parameters studied, reducing jet temperature somehow benefits the improvement of the normal force and the jet efficiency. When the pressure ratio of jet to freestream is fixed, the relative force increment varies little when increasing the freestream Mach number, while the jet amplification factor increases.