MHD Flow Control of Oblique Shock Waves Around Ramps in Low-temperature Supersonic Flows

This article is devoted to experimental study on the control of the oblique shock wave around the ramp in a low-temperature supersonic flow by means of the magnetohydrodynamic(MHD) flow control technique. The purpose of the experiments is to take advantage of MHD interaction to weaken the oblique shock wave strength by changing the boundary flow characteristics around the ramp. Plasma columns are generated by pulsed direct current(DC) discharge, the magnetic fields are generated by Nd-Fe-B rare-earth permanent magnets and the oblique shock waves in supersonic flow are generated by the ramp. The Lorentz body force effect of MHD interaction on the plasma-induced airflow velocity is verified through particle image velocimetry(PIV) measurements. The experimental results from the supersonic wind tunnel indicate that the MHD flow control can drastically change the flow characteristics of the airflow around the ramp and decrease the ratio of the Pitot pressure after shock wave to that before it by up to 19. 66%, which leads to the decline in oblique shock wave strength. The oblique shock waves in front of the ramp move upstream by the action of the Lorentz body force. The discharge characteristics are analyzed and the MHD interaction time and consumed energy are determined with the help of the pulsed DC discharge images. The interaction parameter corresponding to the boundary layer velocity can reach 1. 3 from the momentum conservation equation. The velocity of the plasma column in the magnetic field is much faster than that in the absence of magnetic field force. The plasma can strike the neutral gas molecules to transfer momentum and accelerate the flow around the ramp.     

空气冷却旋转盘的萘升华传热—传质模拟实验研究

对空气冷却的旋转盘换热进行了萘升华传热—传质模拟实验。共采用两种模型 :自由盘的实验结果与换热实验数据和理论预测吻合得很好 ;对带罩盘模型得到了盘表面局部施伍德数 sh和平均施伍德数 sh以旋转雷诺数 Reo、流量系数 Cm、间距比 Gs和间隙比 Gc为参变量的实验数据。实验结果对旋转盘 (如涡轮盘 )的换热研究有一定参考价值。     

影响毡基C/C复合刹车材料性能的因素

试验研究了基质材料及其碳纤维的初始质量分数对毡基C/C复合刹车材料密度、力学性能及导热性能的影响     

表面处理工艺对复合材料与金属连接性能的影响

针对电子束毛化表面处理与传统的阳极化、喷砂表面处理工艺进行了对比试验,分析了经这3种工艺处理的金属与复合材料连接件的拉伸试验结果,得出的结论是经电子束毛化表面处理的金属与复合材料连接件的拉伸性能有很大提高.     

大型工件平面度平行度垂直度误差计算与评定方法

提出了一种实用的大型工件平面度、平行度、垂直度误差的计算与评定方法。这种方法适用于各种不规则、不连续的测量表面。评定程序采用最小二乘和最小条件法，搜素速度快，评定结果精度高。     

双膜热流计的研究及其应用

 本文对用于测量涡轮叶片和涡轮外环换热的高频双膜热流计进行了理论分析,并给出了对双膜热流计的校验方法,阐明了双膜热流计的设计及其应用。     

纤维增强及匀质层层叠板动力分析的解析与半解析方法

本文引入复合板条振型函数系列,提出二种层叠板解法。一种纯解析法适用于各种边界条件的矩形层叠板的动力计算;另一种半解析半数值方法适用于任意形状、任意边界的层叠板动力计算,比现有数值计算方法节省大量内存与时间。文中还给出了一系列常用层叠板计算公式。     

超音速绕凹角流动激波与紊流附面层干扰数值解

本文对超音速绕凹角激波与紊流附面层干扰流动进行了计算。计算采用Ce-beei-Keller Box方法;紊流模型用代数涡粘性模型;压强分布用流过尖劈统一的高超音速与超音速公式;对激波与紊流附面层干扰进行迭代修正。计算较好地预估了壁面压强分布以及压强开始升高点位置。     

超声速绕凹角流动的压力分裂形式简化N－S方程数值解

本文从压力分裂形式的简化Ｎ－Ｓ方程出发，用Ｒｕｂｉｎ格式对超声速粘性流动进行了数值求解，给出了超声速绕凹角附着流及带有小分离气泡流动的结果，与其它数值方法所得结果相比，符合较好。