A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

Single track and single layer formation in selective laser melting of niobium solid solution alloy

Selective laser melting (SLM) was employed to fabricate Nb-37Ti-13Cr-2Al-1Si (at%) alloy, using pre-alloyed powders prepared by plasma rotating electrode processing (PREP). A series of single tracks and single layers under different processing parameters was manufactured to evaluate the processing feasibility by SLM, including laser power, scanning speed, and hatch distance. Results showed that continuous single tracks could be fabricated using proper laser powers and scanning velocities. Both the width of a single track and its penetration depth into a substrate increased with an increase of the linear laser beam energy density (LED), i.e., an increase of the laser power and a decrease of the scanning speed. Nb, Ti, Si, Cr, and Al elements distributed heterogeneously over the melt pool in the form of swirl-like patterns. An excess of the hatch distance was not able to interconnect neighboring tracks. Under improper processing parameters, a balling phenomenon occurred, but could be eliminated with an increased LED. This work testified the SLM-processing feasibility of Nb-based alloy and promoted the application of SLM to the manufacture of niobium-based alloys.     

协同翻译环境下辅助译文生成技术研究

在协同翻译过程中，辅助译文的质量是影响协同翻译效率的重要因素，而现有辅助译文生成方法并没有考虑用户对辅助译文的个性化需求。由此，提出了通过建立用户模型来提高辅助译文质量的研究思路，根据翻译知识库与用户知识库的相对熵的大小来决策为用户提供哪个模板。实验表明：在使用用户模型后，协同翻译的效率有了明显的提高。     

CCD信号采样位置选取方法的研究

针对CCD输出信号中的复位噪声,文章介绍了处理复位噪声较为常用的方法--相关双采样技术,并对相关双采样技术中采样位置选取的方法进行分析和研究,最后进行了实验验证.结果表明:用文中方法选取的采样位置进行相关双采样,可以较好的减小CCD输出信号中复位噪声的影响,提高信噪比.     

精密电阻自动考核筛选装置的研制

介绍一种智能型的精密电阻自动考核筛选装置，解决了考核筛选精密电阻时繁重的重复性劳动，并保证了电阻测量的准确性，该装置还可应用于筛选考核稳压块等具有温度系数的器件。     

提高陀螺电机安装定位精度的机理研究

首先研究框架安装孔形位精度对电机性能的影响,进而应用ANSYS有限元分析软件对陀螺电机安装定位误差产生的主要原因进行了分析,列出了定位孔在组装时存在的多种变形状态,计算了框架组件的承载力,并提出设计改进方案,确定装配工艺要求,使陀螺电机的定位精度提高1～2个数量级。     

Further results on adaptive filtering with embedded CFAR

Among the few known adaptive filtering algorithms which have an embedded (integrated) constant false alarm rate (CFAR) performance feature, the generalized likelihood ratio (GLR) test algorithm has been found to be robust in non-Gaussian clutter. This paper examines the detection performance of the GLR algorithm in nonhomogeneous/nonstationary clutter environments which lead to nonidentical distribution of secondary (training) data. For two common types of nonhomogeneity, i.e., the so-called “signal contamination” and “clutter edge”, the asymptotic detection performance is derived and compared with simulations. These asymptotic results are relatively simple to use and they predict the GLR performance in nonhomogeneous environments quite well. The GLR performance loss due to the nonhomogeneity is also evaluated. It is found that the “generalized angle” between the desired and contaminating signal plays an important role in the study of the effects of signal contamination. It is also found that the performance degradation due to the clutter edge depends largely on the width of the clutter spectrum and target-clutter Doppler separation     

多功能实验室环境条件保障装置的设计

介绍了维持计量检定工作环境条件保障装置的设计方法，该装置可实现实验室温，湿度的测量与控制，有方便的通讯接口便于与计算机连接，并附加有多点时间控制电路以实现提前预热仪器设备提高工作效率的功能。     

战斗机滚转姿态快速性研究

介绍了战斗机中等幅度滚转姿态快速性的定义，应用欧拉法对19种飞机构形的滚转快速性进行了仿真计算．其结果与地面模拟战斗机攻击机动试验相比较，表明滚转姿态快速性与滚转模态时间常数、滚转操纵效能、副翼操纵速率和控制系统增益等飞行品质要求密切相关，飞行品质标准MIL—STD—1797没有完全涵盖中等幅度滚转姿态变化的要求。