Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

BTT导弹协调式耦合变结构自动驾驶仪设计

本文应用多变量不确定性系统的模型参考变结构自适应控制理论设计了某型ＢＴＴ导弹协调中变结构自动驾驶仪，有铲地克服了通道间的交叉耦合效应，较好地保证了ＢＴＴ导弹偏航衮动通道之间的协调动作，获得了较高的指令跟踪性能。     

固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

统计滤波理论在飞行器制导系统中的应用

本文叙述了统计滤波方法中具有典型代表性的卡尔曼滤波的基本方法。简要说明了它在惯性平台的自对准与自校准;复合制导中的信息综合以及飞行试验后的误差分离和弹道参数最佳估计中的应用。指出了应用中尚存的问题及今后的可能发展。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

飞行器姿态系统变结构控制的研究

对于具有纯延迟、惯性和由开关控制的非线性飞行器姿态系统，本文提出了采用解耦变结构控制的方法。计算机仿真结果表明，本方法行之有效，具有优良的鲁棒性，设计方法简单和易于实现数字控制等优点     

Ap复合固体推进剂稳态燃烧模型综述

对目前国内外典型的且较为成熟的高氯酸铵复合固体推进剂稳态燃烧模型进行了简要的综述,涉及的燃烧模型有:GDF模型、HR模型、BDP模型、临界粒径模型、PEM模型、CIT/JPL模型、两区模型和价电子模型。对上述模型的适用范围、特点和优缺点进行了较为客观的评价。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

CBERS-1卫星CCD相机零级图像处理研究

CCD相机是CBERS - 1卫星上的主要有效载荷之一。利用其接收的可见光和近红外谱段的图像 ,可以在国民经济的各个生产部门 ,诸如国土资源调查、农业、林业、地矿、水利、环境、生态等方面得到广泛应用。但是由于探元和光学系统成像的物理机制和各种干扰等因素影响 ,地面接收到的数据必须经过处理才能应用。文章介绍的内容就是将这种图像数据经图像预处理 ,得到零级图像 ;经过相应的辐射校正 ,得到一级图像 ;经过几何校正 ,得到二级图像产品 ,提供给其它部门加以应用