RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

PBT弹性体力学性能及低温脆性研究

采用一步法制备了热固性3,3-双(叠氮甲基)环氧丁烷-四氢呋喃共聚醚(PBT)弹性体,并对其氢键结构、应力-应变关系和动态力学性能及低温脆性进行了研究。结果表明,合成的PBT弹性体拉伸强度和断裂伸长率在DEG羟基含量为35%、R=0.97时,可达2.51 MPa和1 274%,玻璃化温度为-34.5℃。高DEG含量的PBT弹性体脆化参数较低,与常温力学性能变化规律相反。因此,引入低温脆化参数,对PBT弹性体的性能优化具有积极意义。     

采用霍尔传感器的旋翼频率采集设计

为达到对旋翼飞机的控制,需要对旋翼转速进行采集.霍尔转速传感器以其高可靠性等优点常被用来测量转速.介绍了一种使用霍尔传感器进行旋翼转速采集系统,包括硬件构架,逻辑采集单元和软件设计,并给出了优化策略;通过试验数据分析,采集精度达到了预期.     

8mm Dicke辐射计波形仿真研究

采用System view软件对从输入到天线的噪声信号到A/D采样之前的各个模块和辐射计线性度进行了波形的仿真研究,仿真结果和实际相符合,对辐射计的硬件实现提供了很好的指导作用。     

某飞行器防热材料力学性能测试与分析

按照飞行过程中的防热层温度变化情况,对某飞行器防热材料进行了不同温度下的弯曲性能测试。测试结果表明,该防热材料在升温和降温过程中,在相同温度点具有明显不同的力学性能。根据材料性能测试结果,用有限元方法进行模拟,进一步得出该材料的弯曲模量与拉伸模量的关系,为防热结构进行有限元分析提供材料性能数据支撑。     

三脉冲冷原子陀螺仪中基于内态演化的拉曼光光强补偿算法

由于在复杂环境中拉曼光功率不稳定会导致原子脉冲的宽度发生改变,从而影响陀螺仪的测量精度.通过对冷原子干涉仪的干涉全过程进行建模,计算得出了陀螺仪在拉曼光改变情形下输出相位的解析表达式,即建立了拉曼光在非近共振条件下强度变化时陀螺仪的输出值与外界载体运动之间的关系.与此同时,基于该解析表达式提出了一种对拉曼光光强的补偿算...     

基于间接法在线能力评估和自主规划技术研究

针对运载火箭推力故障条件下的自主救援任务,研究了一种基于间接法的在线能力评估和自主规划方法.构建了以入轨点能量最大为最优性能指标的最优控制问题.通过数值方法探讨了在满足轨道倾角和入轨点路径角约束条件下,入轨点速度、远地点和近地点跟入轨高度之间的关系,设计了一种与入轨高度相关的特征量来对入轨能力进行评估.以近地点最高为救...