Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

一例输液反应患者护理分析及体会

本文通过对一例发生输液反应患者的护理总结 ,分析了发生输液不良反应的原因 ,提出了完善医疗护理工作的相应举措     

DLR-F4翼身组合体的阻力计算

为了考察自行研发的CFD软件的计算能力和阻力计算精度，本文采用LU—SGS方法、MUSCL差分格式和Baldwin—Lomax代数湍流模型，数值模拟了AIAA阻力计算工作室提供的DLR—F4翼身组合体的绕流流场，综合分析了easel和case2的气动力的计算结果，并与NASA Christopher L．Rumsey采用CFL3D6．0和AFRL/VAAC Don W．Kinsey采用Cobalt60提供的两组计算结果以及AGARD提供的两种不同风洞的测力试验结果作了比较。计算结果表明，本文计算精度与国外CFD软件相当。为了提高激波，边界层干扰的模拟精度，今后要重点加强湍流模型的应用研究。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

Particle simulation of grid system for krypton ion thrusters

The transport processes of plasmas in grid systems of krypton (Kr) ion thrusters at different acceleration voltages were simulated with a 3D-PIC model, and the result was compared with xenon (Xe) ion thrusters. The variation of the screen grid transparency, the accelerator grid current ratio and the divergence loss were explored. It is found that the screen grid transparency increases with the acceleration voltage and decreases with the beam current, while the accelerator grid current ratio and divergence loss decrease first and then increase with the beam current. This result is the same with Xe ion thrusters. Simulation results also show that Kr ion thrusters have more advantages than Xe ion thrusters, such as higher screen grid transparency, smaller accelerator grid current ratio, larger cut-off current threshold, and better divergence loss characteristic. These advantages mean that Kr ion thrusters have the ability of operating in a wide range of current. Through comprehensive analyses, it can be concluded that using Kr as propellant is very suitable for a multi-mode ion thruster design.     

给定通流部分形状时轴流压气机级性能优化

用一维理论对轴流压气机的初步设计作了进一步研究，导出了轴流压气机基元级的特性关系。建立了在给定通流部分形状时最优化设计的数学模型。得到了解析关系。并通过研究给出了数值算例。所得解析关系具有一定的普适性，并可进一步拓展用于多级轴流压气机优化中。     

根据遗传算法的拉深模试冲缺陷智能诊断

总结了拉深模试冲时的缺陷及原因，建立原因表，应用遗传算法技术对拉深模试冲时的缺陷进行智能诊断，探讨了提高拉深模试冲时的缺陷诊断准确率的优化方法，描述了遗传算法的诊断过程。     

基于CSPNAT的航空维修测量过程仿真

维修检查仿真系统有利于培训机务人员的测量技能,维修测量仿真是维修检查仿真系统的核心技术。针对测量过程仿真中测量对象种类繁多,通过引进自顶向下设计方法对Petri网进行理论扩展,在基本Petri网的基础上引入颜色标记、随机时间变迁,对测量对象、测量工具等要素进行描述,构建基于自顶向下设计方法的CSPNAT测量过程模型。通过实例验证其有效性和优越性。     

面向未知区域深度测量的序列图像稠密点特征生成算法

对未知着降区平坦度测量是无人机在复杂地形下安全着陆的关键问题。首先,根据小孔成像原理推导出基于单目序列图像的未知区域深度计算方程;其次,针对稀疏匹配存在深度信息重构误差大而稠密匹配在平滑区域误匹配率高的问题,提出一种基于Delaunay三角剖分的稠密点特征生成算法;然后,分别对序列图像中的2帧图像提取亚像素级Harris角点和尺度不变特征变换(SIFT)特征点,并分别进行特征点匹配;再以2种特征点间的欧氏距离作为约束条件将2种特征点进行融合,生成准稠密特征点;最后,将准稠密特征点进行Delaunay三角剖分,并根据每个剖分三角形上3个顶点像素偏差的方差值制定稠密特征点的生成策略,并结合所提出的深度计算方程计算整个未知区域各点的深度信息。通过Vega Prime(VP)搭建仿真演示验证系统,实验结果表明在机载相机距地面400m处计算高度分别为90m和55m的物体深度信息时,其深度测量相对误差不超过0.89%,具有较高的精度。     

直升机的气动弹性问题

直升机的气动弹性问题与固定翼飞机不同,不仅要考虑单片桨叶,更要将旋翼视为一个整体,考虑其动态入流、尾迹影响以及旋翼与机身之间的相互耦合等。就单片桨叶而言,在结构动力学上,需要考虑离心力场、几何非线性以及桨叶的非线性挥舞-摆振-扭转耦合;在气动力上,需要考虑动态入流以及桨尖处可能的失速效应,本质上属于非线性气动弹性力学范畴。由于旋翼气动力通常是以周期形式通过旋翼轴传给机身,并引起机身振动,而机身运动又通过改变桨叶根部形态反过来影响旋翼的气动弹性特性,这种旋翼/机身耦合问题,也是近年来直升机气动弹性问题研究中的重要方向和热点之一。此外,随着旋翼流场数值分析方法的日趋成熟,采用动态重叠网格或滑移网格方法来实现桨叶运动,并通过动网格技术来实现桨叶的弹性变形,从而实现弹性旋翼流场的数值模拟,目前正呈现出勃勃生机,成为直升机气动弹性研究的又一重要方向和热点。随着各种新构型直升机的相继出现,如倾转旋翼机、前行桨叶概念旋翼(ABC)直升机和复合式直升机等,也带来了新的气动弹性问题。不断发现问题、解决问题,推动本学科持续发展,永远是气动弹性工作者终身奋斗的目标。