翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

TETHERED SATELLITE SYSTEM ANALYSIS (1) — TWO-DIMENSIONAL CASE AND REGULAR DYNAMICS

The study on tethered satellite system (TSS) in two-dimensional in-planar motion is restricted in that the tether is assumed to be massless. The equations of motion are given in a spherical coordinate system to describe the magnitude (tether length) and direction angle of the position vector between the satellites. A length rate control algorithm is adopted, and the controlled motion of the directional angle by the algorithm will have a stable equilibrium state. The equilibrium state is a fixed point if the orbit of the base-satellite is circular, and a limit cycle if the orbit is elliptic. The value and stability of the equilibrium state are determined by the parameters of the control algorithm, and the bifurcation analysis is also given. Two typical TSS missions have been simulated.     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

带滑移铰空间机械臂惯性空间轨迹的复合自适应跟踪控制

讨论了载体的位置与姿态均不受控制的漂浮基带滑移铰空间机械臂的控制问题。动力学分析表明，结合系统动量及动量矩守恒关系得到的运动Jacobi关系及系统动力学方程将是系统惯性参数的非线性函数，借助于增广变量法，我们得到了与惯性参数呈线性关系的系统广义Jacobi矩阵及系统控制方程，以此为基础，针对系统中存在未知惯性参数的情况，设计了一种末端抓手惯性空间期望轨迹跟踪的复合自适应控制方案，此控制方案的优点在于不需要测量空间机械臂载体的位置及移动的速度，加速度，仿真运算证实了方法的有效性。     

斜楔式扭转振动器原理研究

为了解决扭转振动攻丝系统体积大、成本高、使用寿命短等关键问题,使攻丝力矩明显减小的振动攻丝技术能够得到广泛应用,提出了一种结构紧凑、压力角小、具有对称结构、制造工艺简单的斜楔式扭转振动器的传动原理,导出了该振动器的输出运动方程所要满足的必要条件,并给出了输入输出构件凸轮廓线的一般方程.最后通过一个例子证实了方程的正确性.这种扭转振动器可以广泛地应用于振动攻丝、振动铰孔加工.     

轻便风速表检定装置不确定度的测试与评定

根据GJB/J2 74 9《建立测量标准技术报告的编写要求》 ,结合气象计量的实际情况 ,给出了轻便风速表检定装置不确定度的测试与评定方法。     

掺磷纳米硅薄膜的微结构

采用喇曼(Raman)散射谱、高分辨率电子显微镜(HRTEM)和原子力显微镜(AFM)对掺磷纳米硅薄膜的微结构进行了分析,并对纳米硅薄膜的传导机制进行了探讨.结果表明:掺磷纳米硅薄膜由尺寸为2～4*#nm的晶粒和2～3个原子层厚的非晶界面构成,计算得到薄膜的晶态比为40%～55%.与本征纳米硅薄膜相比,掺磷纳米硅薄膜晶粒尺寸和晶态比没有明显变化,电导率却提高了2个数量级.随着掺磷浓度增加,纳米硅薄膜的晶粒尺寸、晶态比及电导率逐渐增大.AFM观察表明掺磷纳米硅薄膜由尺寸介于15～20*#nm的团簇构成,团簇排列具有带状特征.