Modern aspects of planetary protection and requirements to sterilization of space hardware.

The viewpoint of working group of Russian experts on the problem of planetary protection for future manned and unmanned Mars mission is presented. Recent data of Martian environment and on survival of terrestrial microorganisms in extreme conditions were used for detailed analysis and overview of planetary protection measures in regard to all possible flight situations including accidental landing. The special emphasis on "Mars-94" mission was done. This analysis resulted in revised formulation of spacecraft sterilization requirements and possible measures for their best implementation. New general combined approach to spacecraft sterilization was proposed. It includes penetrating radiation and heat treatment of spacecraft parts and components which is to be carried out before the final assembly of spacecraft and gaseous radiation sterilization of the whole spacecraft during the flight to Mars (or from Mars for return missions).     

Comparing the improved Di Giovanni/Radicella model with sounding-based electron density profiles and with the IRI model

The Di Giovanni/Radicella model (DGR) /1/ determines a bottom side electron densty profile alone from the set of routinely scaled ionogram parameters foE, foF1, foF2 and M(3000)F2 and the total electron content; the smoothed sunspot number R12 appears in the calculation. Present designations are DGR2/2/ and DRR3 /3/ [see Appendix]; they are valid in the northern hemisphere. DGR is compared with electron density profiles derived from ionograms obtained at Juliusruh (54.6°N, 13.4°E), and with the (URSI-based) IRI90 at different conditiones. Experimental total electron content (TEC) data are compared to both models. At the considered station, the profiles obtained by both models are reasonably in agreement amongst themselves and with the experimental data.

The TEC derived from the DGR3 model is in good agreement with experimental TEC, whereas, at high solar activity, IRI90 gives too high TEC values, especially during daytime.     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.     

Distribution of calmodulin in corn seedlings: Immunocytochemical localization in coleoptiles and root apices

Immunofluorescence techniques have been used to study the distribution of calmodulin in several tissues in etiolated corn ( , var. Bear Hybrid) seedlings. Uniform staining was seen in the background cytoplasm of most cell types. Cell walls and vacuoles were not stained. In coleoptile mesophyll cells the nucleoplasm of most nuclei was stained as was the stroma of most amyloplasts. The lumen border of mature tracheary elements in coleoptiles also stained. In the rootcap the most intensely stained regions were the cytoplasms of columella cells and of the outermost cells enmeshed in the layer of secreted slime. Nuclei in the rootcap cells did not stain distinctly, but those in all cell types of the root meristem did. Also in the root meristem, the cytoplasm of metaxylem elements stained brightly. These results are compared and contrasted with previous data on the localization of calmodulin in pea root apices and epicotyls and discussed in relation to current hypotheses on mechanisms of gravitropism.     

VEGA three-channel spectrometer experiment: Spectroscopy of comet Halley in the visible and near-ultraviolet ranges

A total of 3600 spectra of Comet Halley in the 275–710 nm were obtained on March, 8, 9, 10 and 11, 1986, from the VEGA 2 spacecraft. The emissions of OH, NH, CN, C₃, CH, C₂, NH₂ and H₂O⁺ are identified. From the OH intensity in the (0,0) band: 1.1 Megarayleigh at 5400 km from the nucleus, it can be inferred that the OH production rate was (1.4 ± 0.5)×10³⁰ molecules s⁻¹. The NH, C₃, CH and NH₂ bands became comparatively more intense at distances from the nucleus shorter than 3000km. At 06:40 U.T. when the instrument field of view was 6000×4500 km, two jets were observed. Spectra from the jets show significant differences with other spectra. Inside a jet NH, C₃ and NH₂ are comparatively more intense and the rotational distributions of OH, CN and C₂ are strongly distorted. This shows that part of the observed emissions probably comes from radicals directly produced in the excited state during the initial process of photolysis of the parent molecules.     

The potential of the lichen symbiosis to cope with the extreme conditions of outer space II: germination capacity of lichen ascospores in response to simulated space conditions.

Complementary to the already well-studied microorganisms, lichens, symbiotic organisms of the mycobiont (fungi) and the photobiont (algae), were used as "model systems" in which to examine the ecological potential to resist to extreme environments of outer space. Ascospores (sexual propagules of the mycobiont) of the lichens Fulgensia bracteata, Xanthoria elegans and Xanthoria parietina were exposed to selected space-simulating conditions (up to 16 h of space vacuum at 10(-3) Pa and UV radiation at 160 nm < or = lambda < or = 400 nm), while embedded in the lichen fruiting bodies. After exposure, the ascospores were discharged and their viability was tested as germination capacity on different culture media including those containing Mars regolith simulant. It was found that (i) the germination rate on media containing Mars regolith simulant was as high as on other mineral-containing media, (ii) if enclosed in the ascocarps, the ascospores survived the vacuum exposure, the UV-irradiation as well as the combined treatment of vacuum and UV to a high degree. In general, 50 % or more viable spores were recovered, with ascospores of X. elegans showing the highest survival. It is suggested that ascospores inside the ascocarps are well protected by the anatomical structure, the gelatinous layer and the pigments (parietin and carotene) against the space parameters tested.     

Modeling of “gradual” solar energeticparticle events using a stochastic differential equation method

We have modeled “gradual” solar energetic particle events through numerical simulations using a StochasticDifferential Equation (SDE) method. We consider that energetic particle events are roughly divided into two groups: (1) where the shock was driven by coronal mass ejections (CMEs) associated with large solar flares, and (2) where they have no related solar events apart from the CMEs. (The detailed classification of energetic particle events was discussed in our previous paper.) What we call “gradual” solar energetic particle events belong to the former group. Particles with energies greater than 10 MeV are observed within several hours after the occurrence of flares and CMEs in many gradual events. By applying the SDE method coupled with particle splitting to diffusive acceleration, we found that an injection of high energy particles is necessary for early enhancement of such a high-energy proton flux and that it should not be presumed that the solar wind particles act as the seed population.     

多协议多用户GPS/GSM监控系统网关的设计与实现

在多协议、多用户GPS(Global Position System)/GSM(Global System for Mobile communications)监控系统中,网关的设计对系统的性能、可用性和可扩展性有重要作用.讨论了在网关设计中需要注意的几个关键问题:通过分析不同短消息服务器的接口协议,提出使用协议管理器实现多协议接入;给出了与用户系统的通信指令格式,并分析了地址的转换流程.最后剖析了用多线程方式和消息驱动实现这种系统的优点,并给出了一个具体实现的消息循环流程.实践证明这种设计是可靠高效的.     

锯齿型扰流片对壁面压力分布的影响

在风洞用电子扫描阀进行测压,研究了绕平板扰流片和锯齿扰流片分离流动的壁面压力分布.结果表明平板扰流片和锯齿扰流片均在上游x/h=-6处剪切层开始分离,并再附于下游x/h≈20的位置.锯齿扰流片横向位置的变化对壁面平均压力分布几乎没有影响,但通过锯齿槽流向的压力脉动一般大于通过锯齿尖点流向的脉动.从平均压力分布看,锯齿高度可以增加扰流片阻流效果,采用锯齿扰流片可以减小下游壁面压力的脉动.     

掺磷纳米硅薄膜的微结构

采用喇曼(Raman)散射谱、高分辨率电子显微镜(HRTEM)和原子力显微镜(AFM)对掺磷纳米硅薄膜的微结构进行了分析,并对纳米硅薄膜的传导机制进行了探讨.结果表明:掺磷纳米硅薄膜由尺寸为2～4*#nm的晶粒和2～3个原子层厚的非晶界面构成,计算得到薄膜的晶态比为40%～55%.与本征纳米硅薄膜相比,掺磷纳米硅薄膜晶粒尺寸和晶态比没有明显变化,电导率却提高了2个数量级.随着掺磷浓度增加,纳米硅薄膜的晶粒尺寸、晶态比及电导率逐渐增大.AFM观察表明掺磷纳米硅薄膜由尺寸介于15～20*#nm的团簇构成,团簇排列具有带状特征.