尾支杆干扰非线性修正方法的初步研究

利用CFD方法 ,采用两套网格重叠的形式 ,研究了一种对尾支杆干扰进行修正的非线性方法。运用本方法 ,研究了尾支杆等直段长度、直径和锥角对模型气动特性的影响 ,研究了四个模型有攻角时的尾支杆干扰 ,并对GBM 0 4A模型的零阻进行了尾支杆干扰的修正。     

月食过程月表太阳辐照和温度变化模拟

月食对月球轨道探测器的温度有重要的影响,分析月食时月表的太阳辐照和温度,具有重要意义。文章给出了通用的月表温度模型和月食时月表太阳辐照模型,根据某次月食的天文参数,用太阳辐照模型可求出月表任一点在月食时的太阳直接辐照变化过程,代入温度模型可求出任一点的温度变化过程。此模型和方法可用于对任何一次月食的分析,并以2007年8月28日的月食为例,模拟了该次月食的表面太阳直接辐照和温度的变化过程。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

一种适合卫星网络的拥塞控制算法

针对卫星信道环境中存在随机误码和突发误码现象,现有TCP协议不能很好地区分数据丢失的具体原因,导致TCP协议性能下降的问题,提出了一种新的拥塞控制算法。此算法采用高低优先级数据包间隔发送的数据发送策略,并根据接收端的数据接收状况判断数据丢失的原因,采取相应的拥塞窗口控制策略。另外,为了减少反向链路带宽的占用,接收端采取周期发送应答信息的策略。应答信息包含了数据接收的整个状态。通过与当前多种针对此问题的协议进行仿真比较,所提出的拥塞控制算法不仅可以有效地区分数据丢失原因,提高前向链路吞吐量,而且还降低了反向链路的带宽占用。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

固体火箭冲压发动机一体化CAD系统设计

针对固体火箭冲压发动机的特点，研制了固体火箭冲压发动机CAD软件，该软件系统包括了燃气发生器设计、助推补燃室设计、进气道设计、发动机性能计算和飞行弹道的计算。使用该系统可进行固体火箭冲压发动机总体方案论证，预估发动机的主要结构尺寸和发动机的整体性能。本文以一假想的空－空弹用固冲发动机方案设计为例，介绍固冲发动机设计步骤和软件系统的特点。     

基于预警卫星观测的弹道导弹运动状态估计算法

针对预警卫星仅有角度测量信息,目标运动可观测性很弱,而导致最大似然弹道估计条件病态严重的问题,提出基于提供目标状态估计和联合误差协方差的Levenberg-Marquardt算法的修正最大似然估计(MML)算法.利用预警卫星初始观测时刻的目标高度和速度等部分先验信息作为伪测量量,推导出导弹运动状态参数估计的修正最大似然算法.最后,对算法进行了Monte-Carlo仿真研究,仿真结果表明估计误差同理论误差边界相当,验证了估计算法的一致性和有效性.