Progress of Double Star Program

The Double Star Programme (DSP) is the first joint space mission between China and ESA. The mission, which is made of two spacecraft, is designed to investigate the magnetospheric global processes and their response to the interplanetary disturbances in conjunction with the Cluster mission. The first spacecraft, TC-1 (Tan Ce means "Explorer"), was launched on 30 December 2003, and the second one, TC-2, on 25 July 2004 on board two Chinese Long March 2C. Due to the importance of and success of DSP, both CNSA and ESA approved the extension of DSP. This paper presents DSP mission and some important scientific results made based on the data of DSP.     

承载式车身覆盖件板厚优化及灵敏度分析

探讨了基于有限元模型的承载车身覆盖件板厚优化和灵敏度分析的方法。在大型设计和分析软件UG和ANSYS上建立了车身的有限元模型,分析了覆盖件板厚对车身承载的不同影响效果。     

TVC/PSM飞机的过失速动态边界及敏捷性分析

以飞机为质点，考虑在最少输入数据情况下，曲于转弯速率图并从能量的角度计算和分析了TVC/PSM飞机的过失速动态边界，选取敏捷性尺度空战周期时间和指向裕度，对比分析了TVC/PSM飞机和传统飞机的敏捷性，得出了一些有益的结论，并提出了一些建议。     

智能材料在微机械中的应用及发展

论述了微机械的发展现状,综述了硅、形状记忆合金、压电陶瓷、超磁致伸缩等智能材料在微型机械中的最新应用及发展趋势。提出了智能材料结构在微型机械中应用的几个关键问题。     

成分调整对DZ125合金凝固行为的影响

研究了标准成分的DZ125合金与以此为基础提高W、Al，降低Mo、Ti合金中的初生相的凝固顺序，确定了这两种合金在固-液范围内不同温度下的固-液相比例。结果表明，高W、Al低Mo、Ti合金显著缩小了合金凝固范围（Δ），使液相线温度提高了20℃，固相温度提高了70℃，并缩小失去技晶间毛细补缩能力时的温度与固相线之间的温度范围（ΔT2），从而减少了合金热裂倾向，提高了可铸性。Ti含量影响（γ＋γ'）共晶相尺寸、数量及形态，W、Wo对（γ＋γ'）共晶的数量、尺寸及形态均无影响。     

用凝固模拟方法预测铝合金铸件缩松的形成

用有限元法和六节点等参数单元对铝合金金属型铸造过程进行了温度场的数值模拟，对铸件不同典型部位进行了金相分析，结果表明，参数Ｇ／可有效地预测铝合金缩松形成倾向的大小，计算值与实测值基本一致。     

一类回归分析预测模型及其应用

提出了一类回归分析预测模型，这类模型将多项式和一些简单的数学函数相乘．得出分两步求解模型中待定参数的近似方法，简化了待定参数的求解过程。给出了这类模型的应用实例，结果表明：同一些简单函数构成的模型相比，这类模型具有较好的预测能力。     

双向进气结构脉管制冷机直流形成机理

在脉管制冷机中,由双向进气结构诱发的直流流动,不仅会增加冷端换热器的负载,降低制冷机性能,而且还是引起制冷温度不稳定的重要原因。如何有效地抑制直流流动已成为脉管制冷机能否大规模应用的关键。而对直流形成机理进行全面、深入的研究是发展简单、有效直流抑制手段的前提。针对该研究热点,本文开展了双向进气结构脉管制冷机直流形成机理研究,基于流体网络理论,考察工质物性对直流的影响和作用机理,进一步揭示了直流的形成本质。     

On suboptimal detection of 3-dimensional moving targets

The author designates matched filters that are completely characterized by the velocity of the target as assumed velocity filters (AVFs). Like most matched filtering techniques where the signal parameters range in a continuum, the AVF must be implemented suboptimally by partitioning the velocity space. The author investigates the possibility of using a signal-to-noise ratio (SNR) loss factor as the criterion for the partition. The loss factor is a measurement of the loss of SNR at the output of the matched filter due to mismatch of filter parameters. In the scenario of detecting a moving satellite from a ground-based sensor, because of the vast sky the sensor has to search, it is important to keep the number of filters minimal. The author shows that, with a fixed loss factor, the number of filters required for coverage increases linearly as the span of the two-dimensional velocity space increases quadratically. The rate of increase is further reduced when the loss factor is made proportional to expected target angular speed