k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

培养学生英语口语交际能力的策略探讨

文章就大学生英语口语交际能力存在的问题进行了分析,探讨如何提高英语口语交际能力的策略。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

三维非结构网格DSMC并行算法及应用研究

基于PC-CLUSTER机群并行体系结构与消息传递库MPI并行环境,研究了三维非结构网格DSMC并行算法。提出一类基于结构背景网格上的非结构网格动态分区策略,保证各子区域的分子数量大致相等,实现计算进程间的动态负载平衡。利用MPI库函数构造了两类符合DSMC并行原理的通讯法:单步通讯法与多步通讯法。采用单控制多数据流(SPMD)以及Master/Slave并行模式,设计了三维非结构网格DSMC整体并行算法。给出了跟踪模拟分子在四面体网格间迁移运动的详细计算过程。最后对全尺寸航天飞机高超声速绕流进行了并行模拟,验证并行算法的有效性。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

基于遗传算法和空间推进方法的高超声速进气道优化设计研究

将遗传算法（单目标遗传算法GA和多目标遗传算法NSGA-Ⅱ、NCGA）与高效、高精度的卒间推进方法——SSPNS（Single-sweep Parabolized Navier-Stokes Algorithm）流场计算方法相结合，对二维高超声速进气道进行了气动优化设计研究。在单目标优化设计中以巡航点（Ma=7．0）的总压恢复最大为设计目标，多目标设计中则在巡航点分别考察了总压恢复最大-压升最大两目标模型、总压恢复最大-压升最大-阻力系数最小三目标模型。优化设计结果表明，单目标设计使得总压恢复有明显提高；多目标优化设计所得的Pareto最优前沿为设计者提供了可靠的设计依据。为了兼顾巡航点和加速爬升段的综合忭能，采用多目标优化方法对进气道进行了多点优化设计，并开展了基于等动压弹道的设计点选择问题初步研究。计算结果表明，若将设计点选在Ma=6．5左右，则进气道的综合性能较好。     

基于偏差信息的星载计算机系统负载平衡算法的研究

相邻结点负载平衡算法具有计算简单、额外开销小的优点。但由于采用局部的观点平衡负载，限制了结点信息得到的范围，使得系统在某种情况下达不到全局平衡，本文提出了基于偏差信息的星载计算机系统负载平衡算法，它改变了结点传递的实际负载信息，使修改后的负载信息能体现出结点及其周边结点的负载形势，以此弥补了相邻结点负载平衡算法的不足，并将其应用在星载计算机系统上，首先，介绍了相邻结点负载平衡算法及其存在的不足；其次，描述了基于偏差信息的星载计算机系统负载平衡算法，最后，通过仿真实验，给出了这种算法同其它几种负载平衡算法的比较，并证明了它的正确性与可行性。