The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented.     

高超声速飞行器二元进气道试验和计算

设计了一种吸气式面对称高超声速飞行器,针对进气道性能,分别在两座风洞开展通流试验研究。针对第1次风洞试验大攻角状态(α=8°)测量值偏离线性的问题,辅助采用数值模拟手段分析原因,并对试验方案进行改进设计,解决了首次试验出现的问题。结果显示,在典型状态(Ma=5~6)下,进气道起动正常,性能良好,具有一定的抗侧滑能力;随来流马赫数增加,进气道流量系数增大,总压恢复系数减小,计算结果和试验结果一致;试验结果和数值计算的差异主要表现为基本测压方案α>4°后,流量系数和总压恢复系数出现严重的非线性。数值模拟结果表明,主要原因为模型支撑方式及测压方式所引起的偏差,通过改进试验方案,解决了大攻角状态下测量值偏离正常趋势的问题。     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

Robust speed sensorless induction motor drive

A speed sensorless induction motor (IM) drive with robust control characteristics is introduced. First, a speed observation system, which is insensitive to the variations of motor parameters, is derived based on the concept of sliding mode. Next, an integral-proportional (IP) speed controller using the estimated speed signal is designed to stabilize the speed loop. Then, to preserve the robust control performance under parameter variations and external load disturbance, an adaptive uncertainty observer with feedforward control is proposed. The adaptive uncertainty observer is implemented to estimate the lump of uncertainty of the controlled plant. To increase the accuracy of the estimated values, the speed observation system is implemented using a digital signal processor (DSP) with a high sampling rate     

一种语音信号欠定盲分离的新方法

文章提出了一种语音信号欠定盲分离的新方法,引入了一种伪提取矢量的概念,并通过在信号采样点处选取对应的伪提取矢量,以恢复取值占优的源信号采样点的值,来实现欠定盲源分离。通过将该方法与传统的基于线性规划的欠定盲源分离方法分别仿真表明:文章所提出方法由于在信号的各采样点处无需优化,因此大大提高了信号分离的速度,语音信号的分离速度比基于线性规划的方法快数倍。     

提高长线传输数字波形质量的技术措施

从两方面论述数字编码波形在长线上传输的影响因素及其改善措施。通过分析并经实验表明，长线的分布电容影响通常居诸因素之首位。改进长线驱动电路，在一定程度上，可改善其传输波形之质量。另外，可利用长线传输波形的同时，还传输供总线接口电路需要的电源能量，满足总线浮空隔离的要求，有效地抑制了共模干扰。此项技术适用于远距多路串行总线的数据采集系统。     

CAD技术及其在卫星工程中的应用

CAD 技术作为一种高效率、高质量、高精度的设计技术,正在包括航天技术在内的多个领域中广泛应用,发挥其效益。尤其是在机械(MCAD)与电子(ECAD)两方面的应用,更是令人瞩目。本文就CAD 技术的范畸、功能、组成、主要技术等并结合卫星研制的具体应用前景,作一介绍,目的在于推动CAD技术的开展,并为CAD/CAM 一体化做好思想准备。     

ISAR欺骗干扰效果评估方法研究

逆合成孔径雷达（ISAR）能够获取运动目标的一维像和二维像,利用宽带特征识别出真实空间目标.宽带成像欺骗干扰是对抗ISAR雷达目标识别的有效措施.构建了基于目标结构特征的ISAR欺骗干扰效果评估体系,提出了相应的干扰效果评估准则,研究了ISAR欺骗干扰效果评估方法.利用仿真评估软件进行仿真分析,验证了评估方法的合理性.     

Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

大膨胀比跨声速涡轮流动结构及损失的数值研究

为了揭示跨声速大膨胀比涡轮损失的主要特点和两种不同尾缘冷却方式对损失的影响,以典型大膨胀比跨声速涡轮和跨声速叶栅为研究对象开展了数值研究。研究发现大膨胀比跨声速涡轮的主要损失是叶型损失,占到总损失的65%左右,尾缘激波损失是叶型损失的主要来源。尾缘全劈缝冷气入射通过提高尾缘基压区基压来减少尾缘膨胀波对气流的加速程度,从而降低最高马赫数和激波损失,尾缘压力面劈缝冷气入射通过改变叶片尾缘压力面激波波系结构,使原来的一道激波变成两道或者两道以上的弱激波,从而减少激波损失。两种尾缘冷气方式都有利于降低大膨胀比跨声速涡轮激波损失,但压力面劈缝冷气入射方式效果更为明显。