Thick galactic cosmic radiation shielding using atmospheric data

NASA is concerned with protecting astronauts from the effects of galactic cosmic radiation and has expended substantial effort in the development of computer models to predict the shielding obtained from various materials. However, these models were only developed for shields up to about 120 g/cm² in mass thickness and have predicted that shields of this mass thickness are insufficient to provide adequate protection for extended deep space flights. Consequently, effort is underway to extend the range of these models to thicker shields and experimental data is required to help confirm the resulting code. In this paper empirically obtained effective dose measurements from aircraft flights in the atmosphere are used to obtain the radiation shielding function of the Earth's atmosphere, a very thick, i.e. high mass, shield. Obtaining this result required solving an inverse problem and the method for solving it is presented. The results are shown to be in agreement with current code in the ranges where they overlap. These results are then checked and used to predict the radiation dosage under thick shields such as planetary regolith and the atmosphere of Venus.     

An ethical duty: Let astronautical development unfold – to make the people more secure

In examining alternative space-development models, one observes that Heinlein postulated the first Moon flight as the outcome of the focused action of an individual – building upon an ample commercial aerospace transportation infrastructure. The same technological basis and entrepreneurial drive would then sustain a fast human and economic expansion on three new planets. Instead, historically, humans reached the Moon thanks to a “Faustian bargain” between astronautical developers and governments. This approach brought the early Apollo triumphs, but it also created the presumption of this method as the sole one for enabling space development. Eventually, the application of this paradigm caused the decline of the astronautical endeavor. Thus, just as conventional methods became unable to sustain the astronautical endeavor, space development appeared as vital, e.g., to satisfy the people?s basic needs (metabolic resources, energy, materials, and space), as shown elsewhere. Such an endeavor must grow from actions generating new wealth through commercial activities to become self-supporting. Acquisition and distribution of multiform space resources call, however, for a sound ethical environment, as predatory governments can easily forfeit those resources.     

Navigation Solution to Maneuver a Spacecraft Relative to a Sphere Centered on a Cooperative Satellite

A differential correction algorithm is presented to deliver an impulsive maneuver to a satellite to place it within a sphere, with a user defined radius, centered around a non-maneuvering satellite within a constrained time. The differential correction algorithm develops and utilizes the State Transition Matrix along with the Equations of Motion and multiple satellite?s state information to determine the optimum trajectory to achieve the desired results. The results from the differential correction algorithm are very accurate for prograde orbits, as presented. The results allow for orbit design trade-offs, including satellites? initial inclinations, semi-major axes, as well as the ballistic coefficients. The results also provide an empirical method to determine the optimum ΔV$\mathrm{\Delta }V$ solution for the provided problem. Understanding that the minimum fuel solution lies with a semi-major axis ratio of 1, a very accurate empirical approximation is presented for semi-major axis ratio values less than and greater than 1. This work ultimately provides the generalized framework for applying the algorithm to a unique user defined maneuvering spacecraft scenario.     

Effect of weightlessness on posture and movement control during a whole body reaching task

Here are reported preliminary results of the “Synergy” experiment performed aboard the Russian orbital station “MIR” in July 1993 (Altaïr Mission). The experiment was carried out before, during, and after the space flight of two astronauts (S1 and S2). The duration of the flight was 21 days for S1 and 6 month for S2. The subjects were tested during preflight, inflight and postflight. The astronaut subjects were fixed on the ground by the feet. They were asked to pick up a box in front of them on the ground. Two velocities of movement and two distances of the target to be reached were tested. The movement of several small markers placed on the body was recorded on video tape.

Results show that the shape of head and hand trajectories in the sagittal plane remains roughly the same during the flight in spite of the modification of mechanical constraints. Trajectory invariance does not result in joint angular displacement invariance. These data indicate that the planning of the movement takes place in terms of head and hand trajectories rather than joint rotations as it was previously suggested for simple arm reaching movement.     

Spatial orientation during locomotion [correction of locomation] following space flight

To investigate changes in spatial orientation ability and walking performance following space flight, 7 astronaut subjects were asked pre- and post-flight to perform a goal directed locomotion paradigm which consisted of walking a triangular path with and without vision. This new paradigm, involving inputs from different sensory systems, allows quantification of several critical parameters, like orientation performance, walking velocities and postural stability, in a natural walking task. The paper presented here mainly focusses on spatial orientation performance quantified by the errors in walking the previously seen path without vision. Errors in length and reaching the corners did not change significantly from pre- to post-flight, while absolute angular errors slightly increased post-flight. The significant decrease in walking velocity and a change in head-trunk coordination while walking around the corners of the path observed post-flight may suggest that during re-adaptation to gravity the mechanisms which are necessary to perform the task have to be re-accomplished.     

Leg venous hemodynamics and leg volumes during a 42 day -6 degrees head-down bedrest

Seven healthy subjects were submitted to a 42-day head down bedrest, where leg venous compliance (venous distensibity index VDI) and leg volumes were assessed by mercury strain gauge plethysmography with venous occlusion and optoelectronic plethysmography, respectively. Plethysmographic and volometric measurements were made, before, during (at days 1, 4, 7, 14, 21, 26, 34 and 41), and after bedrest (days 1, 4, 7, 11 and 30 of the recovery period). Results showed a continuous decrease in leg volumes throughout bedrest, when VDI increased until day 26 of bedrest, and then decreased afterwards. The recovery period was characterized by a rapid return of VDI to prebedrest levels while leg volumes progressively normalised. These results showed that leg venous compliance changes are not always dependant upon skeletal muscle changes, and that factors other than size of muscle compartment are able to determine increases in leg venous compliance during long-term bedrest.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

Improved multilevel quantization for detection of narrowbandsignals

Nearly optimum quantization levels for multileveled quantizers in radar receivers and distributed-detection are calculated for preassigned false-alarm probability Q₀ by maximizing the detection probability Q_d after replacing both Q ₀ and (1-Q_d) by the saddlepoint approximations. Narrowband signals of random phase and with both fixed and Rayleigh-fading amplitudes in Gaussian noise are treated, and the loss in signal detectability incurred by quantization is estimated     

Fiber optic fence sensor developments

Many detection technologies have been employed for perimeter detection, to sensitize a barrier. These outdoor perimeter fence detection sensors must reliably detect intruders attempting to cut or climb the barrier, while ignoring the effects of environmental noise, including nearby activity. In recent conference proceedings, the new IntelliFIBER/spl trade/ fiber optic based product was introduced and compared with previous technologies. IntelliFIBER is designed to provide the advantages of a nonconductive "dielectric" cable sensor, e.g., resistance to electromagnetic interference and the ability to provide longer cable zones. It utilizes the proven processor of the Intelli-FLEX/spl trade/ triboelectric cable fence sensor, which provides relay or bidirectional networked serial communications and is compatible with its calibration module. IntelliFIBER also capitalizes on the Intelli-FLEX's adaptive detection algorithms that were developed through extensive field-testing, to provide exceptional immunity to environmental alarms while still detecting the skilled intruder.     

Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.