Track-before-detect procedures for early detection of moving target from airborne radars

In this paper we present a family of track-before-detect (TBD) procedures for early detection of moving targets from airborne radars. Upon a sectorization of the coverage area, the received echoes are jointly processed in the azimuth-range-Doppler domain and in the time domain through a Viterbi-like algorithm that exploits the physically admissible target transitions between successive illuminations, in order to collect all of the energy back-scattered during the time on target (TOT). A reduced-complexity implementation is derived assuming, at the design stage, that the target does not change resolution cell during the TOT in each scan. The constant false alarm rate (CFAR) constraint is also englobed in the proposed procedures as well as the possibility of working with quantized data. Simulation results show that the proposed algorithms have good detection and tracking capabilities even for high target velocities and low quantization rates.     

Voyager 2 Observations of Corotating Interaction Regions (CIRs) in the Outer Heliosphere

We review observations from Voyager 2 of CIRs and merged CIRs in the outer heliosphere. The rather simple characteristics of the CIR-associated changes in plasma, magnetic field, and particles become more complex as observations are made at greater and greater distances. Pickup ions from charge exchange undoubtedly play an important role in the structure, but the full details are not yet understood. This revised version was published online in August 2006 with corrections to the Cover Date.     

用偏微分方程构造车身外形曲面

阐述了在给定边界条件及其他曲面限制因素的情况下,用偏微分方程构造曲面的基本理论;研究了引入曲面形状控制系数来控制生成曲面的形状以及应用于车身外形曲面设计的实现方法,并分析了该方法的特点,最后给出了在车身设计中应用的实例。     

单晶铝纳米级硬度试验研究

使用纳米硬度计对单晶铝进行了纳米压痕试验，利用原子力显微镜对压痕形貌进行扫描并计算硬度值，重点观察和分析了纳米级条件下单晶铝的硬度性质，结果表明，当压痕深度小于2000nm时，单晶铝纳米硬度存在尺寸效应现象；从材料性质的角度分析了纳米硬度尺寸效应现象；探讨了纳米硬度和传统硬度本质上的区别，指出其根本原因在于不同尺度下人们对材料性质的关注点不同。     

热障涂层喷涂质量微焦点CT检测

采用微焦点X射线源对热障涂层样品进行了高分辨率X射线成像研究,采用多尺度对比度增强算法提高了热障涂层与基体之间的对比度.X射线图像显示热障涂层各处厚度差异较大,热障涂层内部可能存在大量孔隙.通过微焦点计算机层析成像(CT)对样品进行了高分辨率CT扫描与重建,得到了样品的CT重建图像.从热障涂层CT图像观察到热障涂层内部存在大量孔隙,且不同层孔隙尺寸、数量不同.结合3个坐标方向的切片图像分析了热障涂层深度方向的热障涂层厚度,得到了热障涂层厚度的二维分布,测量得到热障涂层平均厚度约为40μm.对沿热障涂层深度方向850~1131层切片图像,利用可视化软件VGstudio MAX得到了热障涂层内部孔隙三维分布.研究结果表明:微焦点CT可用于热障涂层制备工艺质量检测.      

Rocket berthing to an asteroid: Design problems

The results of research in a process of a probe rocket berthing to an asteroid are presented. Control laws were obtained as solutions of three problems, namely berthing considering transient processes in a rocket engine, fastest berthing with regard to fuel consumption and berthing in a scheduled time considering fuel consumption. A program trajectory obtained at solving of the first problem is suitable for mathematical modeling of berthing with the feedback control law and stabilization of angular motion. The solutions of the problems are reduced to simple formulas for controlling parameters calculation in the corresponding structures of control laws. The results can be applied in designing promising space vehicles intended for berthing to other space objects.     

Analysis of geometrically nonlinear shells of revolution based on the finite element method with the vector interpolation of desired quantities

In this paper, we present an algorithm for geometrically nonlinear finite element analysis of the shells of revolution. Use is made of the most proper algorithms for vector interpolation of displacements through the nodal unknowns and an efficient algorithm for obtaining the stress-strain increment relation at a step of loading. By comparing the results of analyzing a geometrically nonlinear shell of revolution obtained on the basis of the ANSYS software with the scalar interpolation of displacements with those obtained on the basis of an author-developed finite element, it has been shown that application of the FEM vector displacement interpolation leads to increasing the accuracy of the finite element solutions in analyzing the stress-strain state of the geometrically nonlinear shells.     

直升机旋翼与机体耦合的空中与地面共振稳定性分析

直升机旋翼气动机械稳定性的一个重要方面是空中与地面稳定性问题。本文从旋翼桨叶的结构型式、气动模型和分析方法几个方面对直升机空中与地面稳定性研究进行了回顾与展望。在简单分析方法的基础上 ,也对更精确的分析方法进行探讨     

Isotopic Signatures of Presolar Materials in Interplanetary Dust

Interplanetary dust particles collected in the stratosphere frequently exhibit enrichments in deuterium (D) and ¹⁵N relative to terrestrial materials. These effects are most likely due to the preservation of presolar interstellar materials. While the elevated D/H ratios probably resulted from mass fractionation during chemical reactions at very low < 100 K temperatures, the origin of the N isotopic anomalies remains unresolved. The bulk of the N-bearing material may have obtained its isotopic signatures from low temperature chemistry, but a nucleosynthetic origin is also possible. This revised version was published online in August 2006 with corrections to the Cover Date.     

Isotopic Criteria for Identification of Organic Carbon on Earth and Meteorites

Contrary to the often stated view, an enrichment of organic material in the light isotope is not a conclusive evidence of its life-related origin. The β¹³C - σ¹³C correlation is a special feature of biological systems. Therefore it can be used as a criterion for identification of organic carbon. A survey of the available isotopic data for organic compounds in meteorites shows that they do not comply with the β¹³C - σ¹³C correlation. The prevalence of amino and hydroxy acids in purines and sugars found in carbonaceous meteorites indicates that condensation of HCN and HCHO passed through cyanohydrin reaction, while biological evolution proceeds through formation of adenosine triphosphate (ATP). This, in addition to the isotope criterion, indicates that the organic compounds in carbonaceous chondrites are not life-related substances. This revised version was published online in August 2006 with corrections to the Cover Date.