Life cycle testing of a sealed 24-V, 42-Ah nickel-cadmium aircraftbattery

Extensive research has been conducted in the design and manufacture of very long life sealed maintenance free nickel-cadmium aircraft batteries. This study presents data on a 100% depth of discharge (DOD) life test performed on a nominal capacity 42-Ah battery. The purpose of this study is to validate design concepts, determine the life characteristics of the newly designed sealed Ni-Cd batteries, and develop baseline information on failure rates and mechanisms. The data from this experiment can be used to compare depth of discharge versus battery life with similar tests such as the lower DOD experiments performed on spacecraft batteries. This information is important in the ongoing development of long life batteries and in developing failure models for life prediction     

Pattern recognition of star constellations for spacecraftapplications

A software system for a star imager for on-line satellite attitude determination is described. The system works with a single standard commercial CCD-camera with a high aperture lens and an onboard star catalogue. It is capable of both an initial course attitude determination without any prior knowledge of the satellite orientation and a high-accuracy attitude determination based on prediction and averaging of several identified star constellations. In the high accuracy mode the star imager aims at an accuracy better than 2 arc sec with a processing time of less than a few seconds. The star imager is developed for the Danish microsatellite Oersted     

Monte Carlo track structure studies of energy deposition and calculation of initial DSB and RBE.

Estimation of exposure due to environmental and other sources of radiations of high-LET and low-LET is of interest in radiobiology and radiation protection for risk assessment. To account for the differences in effectiveness of different types of radiations various parameters have been used. However, the relative inadequacy of the commonly used parameters, including dose, fluence, linear energy transfer, lineal energy, specific energy and quality factor, has been made manifest by the biological importance of the microscopic track structure and primary modes of interaction. Monte Carlo track structure simulations have been used to calculate the frequency of energy deposition by radiations of high- and low-LET in target sizes similar to DNA and higher order genomic structure. Tracks of monoenergetic heavy ions and electrons were constructed by following the molecular interaction-by-interaction histories of the particles down to 10 eV. Subsequently, geometrical models of these assumed biological targets were randomly exposed to the radiation tracks and the frequency of energy depositions obtained were normalized to unit dose in unit density liquid water (l0(3) kg m-3). From these data and a more sophisticated model of the DNA, absolute yields of both single- and double-strand breaks expressed in number of breaks per dalton per Gray were obtained and compared with the measured yields. The relative biological effectiveness (RBE) for energy depositions in cylindrical targets has been calculated using 100 keV electrons as the reference radiation assuming the electron track-ends contribution is similar to that in 250 kV X-ray or Co60 gamma-ray irradiations.     

Electron density models for the lower ionosphere

Probably the only reliable method of checking an electron density model below 70 km is to calculate from it what would be obtained by VLF or LF propagation over certain paths, and to compare the results with actual observations. This has been done for the IRI at various frequencies from 16 to 70 kHz; the results agree in places but differ substantially elsewhere. Previous models described by the author give satisfactory results and it is suggested that certain features of them might be incorporated with advantage in the IRI. In particular, it is impossible to get agreement with VLF propagation in all seasons by means of a model varying only with solar zenith angle, such as the IRI from 50–90 km.     

Calibration techniques for magnetometers implementing on-board de-spinning algorithms

The Fluxgate Magnetometer experiments on-board the European Space Agency’s four spacecraft Cluster Mission have the capability to store sampled magnetic field vectors in the instrument memory, either as a full resolution ‘event capture’ or as spin-resolution vectors transformed into a non-spinning co-ordinate system (de-spun). The latter capability has ensured a dataset is available which extends the partial orbital coverage achieved during nominal operations in the first years of operation. The on-board de-spin is achieved using a Walsh function with Haar coefficients and allows for up to 27 h additional data per non-coverage interval. A number of commissioning orbits were used to verify the accuracy of data collected by the de-spin mode, whereby individual spacecraft were operated separately in a number of standard normal sampling and de-spin mode combinations. Up to the present time, this data has not been available to the Cluster community. We present results here comparing the performance of the on-board de-spin algorithm versus the normal sampling modes over a number of boundary layer crossings, describe the techniques used for calibration and timeline recovery, and outline the context in which the data may be usable in future studies.     

The Scanning Sky Monitor (SSM) on ASTROSAT

The Scanning Sky Monitor is one of the experiments onboard the ASTROSAT, an Indian multiwavelength astronomy satellite mission. This experiment will detect and monitor X-ray transients in the energy band 2–10 keV. It is similar in design to the ASM on RXTE. It consists of position-sensitive proportional counters with one-dimensional mask. We describe the configuration of the experiment. We also discuss some of the results obtained using a detector which has already been fabricated and tested in our laboratory.     

Performance and reliability of the NASA Biomass Production Chamber.

The Biomass Production Chamber (BPC) at the Kennedy Space Center is part of the Controlled Ecological Life Support System (CELSS) Breadboard Project. Plants are grown in a closed environment in an effort to quantify their contributions to the requirements for life support. Performance of this system is described. Also, in building this system, data from component and subsystem failures are being recorded. These data are used to identify problem areas in the design and implementation. The techniques used to measure the reliability will be useful in the design and construction of future CELSS. Possible methods for determining the reliability of a green plant, the primary component of a CELSS, are discussed.     

Galactic cosmic ray transport methods: past, present, and future.

The development of the theory of high charge and energy (HZE) ion transport is reviewed. The basic solution behavior and approximation techniques will be described. An overview of the HZE transport codes currently available at the Langley Research Center will be given. The near term goal of the Langley program is to produce a complete set of one-dimensional transport codes. The ultimate goal is to produce a set of complete three-dimensional codes which have been validated in the laboratory and can be applied in the engineering design environment. Recent progress toward completing these goals is discussed.     

Design and analysis of new p(n,k) polyphase pulse compression codes

P(n,k) codes as a new class of polyphase pulse compression codes are introduced and analyzed in detail. The P(n,k) codes are conceptually derived by step approximation of the phase function of a nonlinear-frequency modulated (NLFM) Chirp signal with a favorable energy density spectrum. The significant advantages of P(n,k) codes over conventional polyphase codes are lower autocorrelation sidelobes and an improved tolerance of low Doppler shifts and precompression bandwidth limitations. The primary disadvantage of the P(n,k) codes over conventional codes is a loss in range resolution. The uniform P(n,k) codes are especially attractive for radars employing digital signal professing because their favorable correlation properties also remain when quantization effects are taken into account     

Stimulated electromagnetic emissions by high-frequency electromagnetic pumping of the ionospheric plasma

A high frequency electromagnetic pump wave transmitted into the ionospheric plasma from the ground can stimulate electromagnetic radiation with frequencies around that of the ionospherically reflected pump wave. The numerous spectral features of these stimulated electromagnetic emissions (SEE) and their temporal evolution on a wide range of time scales are reviewed and related theoretical, numerical, and simulation results are discussed. On long (thermal) time scales the SEE constitutes a self-organization of the ionospheric plasma which depends on the interaction of nonlinear processes in a hierarchy of time scales in response to the electromagnetic pumping. Particularly, the appearance of the rich SEE spectrum is associated with the slow self-structuring of the plasma density into a spectrum of magnetic field-aligned density striations. The dependence of the SEE on electron gyroharmonic effects and the presence of density striations suggests that the existence of a magnetic field in the plasma is important for plasma turbulence to dissipate into non-thermal electromagnetic radiation during the long time quasi-stationary state of the turbulence evolution.