Protecting Earth-orbiting spacecraft against micro-meteoroid/orbital debris impact damage using composite structural systems and materials: An overview

Spacecraft that are launched to operate in Earth orbit are susceptible to impacts by meteoroids and pieces of orbital debris (MMOD). The effect of a MMOD particle impact on a spacecraft depends on where the impact occurs, the size, composition, and speed of the impacting object, the function of the impacted system. In order to perform a risk analysis for a particular spacecraft under a specific mission profile, it is important to know whether or not the impacting particle (or its remnants) will exit the rear of an impacted spacecraft wall. A variety of different ballistic limit equations (BLEs) have been developed for many different types of structural wall configurations. BLEs can be used to optimize the design of spacecraft wall parameters so that the resulting configuration is able to withstand the anticipated variety of on-orbit high-speed impact scenarios. While the level of effort exerted in studying the response of metallic multi-wall systems to high speed particle impact is quite substantial, the extent of the effort to study composite material and composite structural systems under similar impact conditions has been much more limited. This paper presents an overview of the activities performed to assess the resiliency of composite structures and materials under high speed projectile impact. The activities reviewed will be those that have been aimed at increasing the level of protection afforded to spacecraft operating in the MMOD environment, and more specifically, on those activities performed to mitigate the mechanical and structural effects of an MMOD impact.     

Analysis of an arbitrarily loaded shell of revolution based on the finite element method in a mixed formulation

The volume finite element in the form of hexahedron with nodal unknowns as components of the displacement vector and stress tensor has been developed to analyze the shells of revolution. The displacement vector components for the inner point of the finite element and the components of its stress tensor are expressed through the nodal unknowns using the method of vector and tensor fields interpolation by the trilinear shape functions; that provides taking into account the finite element displacement as a whole solid. The variational principle in a mixed formulation is applied to form the matrix of hexahedron deformation. The efficiency of the proposed method for approximating the values being sought as vector and tensor fields in comparison with the traditional method for approximating the values being sought as scalar fields is confirmed by a numerical example.     

Issues of geologically-focused situational awareness in robotic planetary missions: Lessons from an analogue mission at Mistastin Lake impact structure,Labrador, Canada

Remote robotic data provides different information than that obtained from immersion in the field. This significantly affects the geological situational awareness experienced by members of a mission control science team. In order to optimize science return from planetary robotic missions, these limitations must be understood and their effects mitigated to fully leverage the field experience of scientists at mission control.     

Clouds and Earth Radiant Energy System (CERES), a review: Past,present and future

The Clouds and Earth Radiant Energy System (CERES) project’s objectives are to measure the reflected solar radiance (shortwave) and Earth-emitted (longwave) radiances and from these measurements to compute the shortwave and longwave radiation fluxes at the top of the atmosphere (TOA) and the surface and radiation divergence within the atmosphere. The fluxes at TOA are to be retrieved to an accuracy of 2%. Improved bidirectional reflectance distribution functions (BRDFs) have been developed to compute the fluxes at TOA from the measured radiances with errors reduced from ERBE by a factor of two or more. Instruments aboard the Terra and Aqua spacecraft provide sampling at four local times. In order to further reduce temporal sampling errors, data are used from the geostationary meteorological satellites to account for changes of scenes between observations by the CERES radiometers.     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

Testing baseline stability of some neutron monitors in Europe,Africa, and Asia

For six decades, the global network of neutron monitors (NMs) has provided a continuous stream of very valuable data to the heliophysics community, leading to many insights into the myriad modes of charged particle transport in the tangled magnetic fields that permeate the 3D heliosphere. Earlier, Ahluwalia and Ygbuhay (2012) reported on the drifts in some high latitude NM counting rates in the American zone. We continue our enquiry by testing the stability of the counting rate baselines of some NMs operating in Europe, Africa, and Asia. The data from these detectors have been extremely valuable for the short-term time variation studies, but caution is advised in using the data for long-term studies from NMs with baselines that are drifting for cause(s) unknown.     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented.     

Comparative analysis of mixing chambers for two multiphase flows of oppositely charged particles

In this paper, we formulated the criteria for evaluating the effectiveness of mixing chambers, needed in obtaining polymeric materials with reproducible properties. The results of comparative analysis of organizing the methods for mixing two multiphase flows of oppositely charged particles are presented. This analysis, carried out using CFD programs, shows that the mixing chamber construction in which the flows being mixed are directed at an angle to each other, and additional gas flow inlets are provided in the lateral wall, is the most efficient.     

Multipath interferometry technique for airborne array calibration

A new technique is developed to compensate multiple-wavelength distortion in airborne antenna arrays. This approach exploits the phase information in microwave reflections from arbitrary terrain. To handle reflections incident over a broad angle, a range-Doppler preprocessor is used in each element channel to resolve wavefronts incident simultaneously from different directions. The phase information for each direction of arrival is compared between elements and processed by optimal estimators to determine the phase corrections needed to compensate the distortion. To develop the estimators, a statistical model of the complex baseband terrain reflections is developed. This is in turn used to generate conditional probability densities involving the range Doppler observations and the parameters to be estimated. These densities are subsequently used to develop minimum variance and maximum likelihood estimators. The new estimators use additional information that has not been exploited by previous techniques and therefore provide enhanced performance