The state experiment — mesospheric dynamics

The $\text{ST}$ructure and $\text{A}$tmospheric $\text{T}$urbulence $\text{E}$nvironment (STATE) experiment was conducted during the second week of June 1983 at Poker Flat Research Range, Alaska. The measurements focus on a study of the middle atmosphere dynamics by comparison between in-situ probe measurements and MST radar measurements. Rocket launchings were conducted at three periods which were selected by monitoring the doppler velocity spectra of the MST radar.The STATE program has included the efforts of several scientists in planning and carrying out the ground-based and rocket measurements. An overview of the program is given together with some preliminary results. The regions in intense backscatter signals detected by the MST radar are shown to correlate with large irregularities in the electron profiles measured.     

Scientific results from the pioneer Saturn infrared radiometer

The Pioneer 11 Infrared Radiometer instrument made observations of Saturn and its rings in broadband channels centered at 20 and 45 μm and obtained whole-disk information on Titan. A planetary average effective temperature of 96.5±2.5 K implies a total emission 2.8 times the absorbed sunlight. Correlation with radio science results implies that the molar fraction of H₂ is 90±3% (assuming the rest is He). Temperatures at the 1 bar level are 137 to 140 K; regions appearing cooler may be overlain by a cloud acting as a 124 K blackbody surface. A minimum temperature averaging 87 K is reached near 0.06 bars. Ring boundaries and optical depths are consistent with those at optical wavelengths. Ring temperatures are 64–86 K on the south (illuminated) side, ～54 K on the north (unilluminated) side, and at least 67 K in Saturn's shadow. There is evidence for a south to north drop in ring temperatures. Titan's 45 μm brightness temperature is 75±5 K.     

Slope Coding of Coherent Pulse-Burst Waveforms

Useful new properties are obtained with a coherent pulse-burst waveform if the FM slopes are allowed to change from pulse to pulse. A design feature using such a "slope-coded" waveform is the ability to transfer, in a controllable manner, ambiguity volume from the range ambiguity peaks to regions located between the peaks (in the frequency direction). Slope coding thus provides a useful mechanism for matching the waveform to the environment; i. e., it permits the signal designer to make some compromise between range ambiguity-peak heights and low-velocity clutter rejection.     

The early history of pulse compression radar-the history of pulsecompression at Sperry Gyroscope Company

The development of pulse compression radar at Sperry is related on the basis of the author's personal recollections. He discusses the first experiments, concept improvements, demonstration of the concept, system implementations, dealings with the US Patent Office, and finishing touches     

Electrical power on a 30 kW space-based radar satellite

An electrical power system for a space-based radar satellite is described. When the radar is on, its transmitter needs an average DC power of 30 kW. The problem of distributing the power efficiently in pulses to many transmit/receive modules is addressed. System requirements include a high-voltage battery and transmission line, load-sharing between the solar array, and the battery during sunlit periods, and a 25-kW solar array. A scaled-down version of the power system for a proof-of-concept demonstration is described     

Effects of increased shielding on gamma-radiation levels within spacecraft.

The Shuttle Activation Monitor (SAM) experiment was flown on the Space Shuttle Columbia (STS-28) from 8-13 August, 1989 in a 57 degrees, 300 km orbit. One objective of the SAM experiment was to determine the relative effect of different amounts of shielding on the gamma-ray backgrounds measured with similarly configured sodium iodide (NaI) and bismuth germante (BGO) detectors. To achieve this objective twenty-four hours of data were taken with each detector in the middeck of the Shuttle on the ceiling of the airlock (a high-shielding location) as well as on the sleep station wall (a low-shielding location). For the cosmic-ray induced background the results indicate an increased overall count rate in the 0.2 to 10 MeV energy range at the more highly shielded location, while in regions of trapped radiation the low shielding configuration gives higher rates at the low energy end of the spectrum.     

Deducing turbulence parameters from transionospheric scintillation measurements

The theoretical framework and experimental methodology used to interpret observations of ionospheric scintillations in terms of geophysical processes are reviewed and recent experimental observations of ionospheric scintillations are discussed in this paper. During the past 15 years significant progress has been made in several areas. In particular, significant advances have been made in theoretical understanding of the strong scintillation regime and the effects of short-term temporal variations of the scintillation producing irregularities on observations made with spaced-receiver geometries in both weak and strong scintillations. This improved understanding of the scintillation process has significantly increased the utility of the technique particularly in the equatorial latitudes where geometrical effects are least important.     

Solar radiometry: Total irradiance measurements

The operating principles of modern absolute radiometers are discussed and the methods of their characterization, that is the accurate determination of the uncertainties, are described. In view of this analysis, the results of the solar constant determinations of the last 6 years are reviewed and an estimate of their uncertainties given. Procedures for the strategy of future experiments are recommended.     

Adaptive Input Filter Compensation for Switching Regulators

An input filter is frequently employed between a switching regulator and its power source. However, its presence often results in degradation of dynamic performances and stability. The detrimental interaction is between an input filter and a switching regulator and is a function of the input filter parameters and also of the supply voltage. An earlier paper presented an analysis and design procedure aimed at developing a feed-forward loop to cancel this undesirable interaction. The feed-forward design is extended here to encompass a scheme that automatically accounts for changes in the supply voltage; the result is an adaptive compensation that tracks the input voltage variations. Experimental results are presented that confirm the adaptive nature of the design.