The GGS/POLAR magnetic fields investigation

The magnetometer on the POLAR Spacecraft is a high precision instrument designed to measure the magnetic fields at both high and low altitudes in the polar magnetosphere in 3 ranges of 700, 5700, and 47000 nT. This instrument will be used to investigate the behavior of fieldaligned current systems and the role they play in the acceleration of particles, and it will be used to study the dynamic fields in the polar cusp, magnetosphere, and magnetosheath. It will measure the coupling between the shocked magnetosheath plasma and the near polar cusp magnetosphere where much of the solar wind magnetosphere coupling is thought to take place. Moreover, it will provide measurements critical to the interpretation of data from other instruments. The instrument design has been influenced by the needs of the other investigations for immediately useable magnetic field data and high rate (100+vectors s^–1) data distributed on the spacecraft. Data to the ground includes measurements at 10 vectors per second over the entire orbit plus snapshots of 100 vectors per second data. The design provides a fully redundant instrument with enhanced measurement capabilities that can be used when available spacecraft power permits.     

Proton phase space densities (0.5eV<Ep<5MeV) at midlatitudes from Ulysses SWICS/HI-SCALE measurements

Proton phase space densities in the solar wind frame from suprathermal velocities 10 km s^–1 to 30,000 km s^–1 (0.5 eV–5 MeV) were derived from combined SWICS and HISCALE measurements when Ulysses was at 5 AU and –24° heliolatitude. The period (19–23 January 1993) encompasses a forward/reverse shock pair (20 January, 0500 UT and 22 January, 0300 UT). Strong evidence is found for shock acceleration of pickup protons from interstellar hydrogen at all energies measured.     

Solar wind charge states measured by ULYSSES/SWICS in the south polar hole

The Ulysses mission now has an extensive data base covering several passes of the south polar coronal hole as the spacecraft proceeds to higher latitudes. Using composition measurements from the SWICS experiment on the Ulysses spacecraft, we have obtained charge state distributions, and hence inferred coronal ionization temperatures, for several solar wind species. In particular, we present an overview of Oxygen ionization temperature measurements, based on the O⁷⁺/O⁶⁺ ratio, for the period January 1993 until April 1994 (23°S to 61°S heliographic latitude), and detailed Oxygen, Silicon and Iron charge state distributions of the south polar hole during a two month period of nearly continuous hole coverage, Dec 1993–Jan 1994 (45°S to 52°S heliographic latitude).     

Dignet: an unsupervised-learning clustering algorithm forclustering and data fusion

Dignet is a self-organizing artificial neural network (ANN) that exhibits deterministically reliable behavior-to-noise interference, when the noise does not exceed a prespecified level of tolerance. The complexity of the proposed ANN, in terms of neuron requirements versus stored patterns, increases linearly with the number of stored patterns and their dimensionality. The self-organization of Dignet is based on the idea of competitive generation and elimination of attraction well in the pattern space. Dignet is used for detection and distributed decision fusion. Analytical and numerical results are included     

Multimodule parallel series-loaded resonant converters

The design and implementation of a multimodule parallel series-loaded resonant (SLR) converter system is presented. The SLR converter to be paralleled is operated in the n=2 discontinuous mode (DCM). Its dc analysis and dynamic modeling are made. In parallel operation, an average control technique is proposed to compensate the mismatch in current control characteristics of each parallel converter. Good dynamic and static current sharing characteristics are obtained. In addition, to obtain good output voltage regulating control performance, a design procedure is presented to find the parameters of feedback voltage controller according to the prescribed specifications     

Optimised radiative cooling of infrared space telescopes and applications to possible missions

General principles are outlined for the design of space infrared telescopes intended to cool by radiation to the lowest temperatures attainable without the use of on-board cryogens, and assuming on-orbit cooling after a warm launch. Maximum protection from solar and earth heating, maximum radiating area and efficiency and minimum absorbing area and absorptivity are the obvious basic criteria. The optimised design is a short, fat telescope surrounded by a series of radiation shields, each cooled by its own radiator. Maximising the longitudinal conductivity of the radiation shields and of the telescope tube itself is important both to the on-orbit cooling time and the final achieveable temperature. Realistic designs take between 80 and 200 days to cool to within a few degrees of equilibrium temperatures, depending on the materials used. Great advantages accrue from the use of an orbit distant from earth. Both simple models and detailed simulations suggest that temperatures of 30 to 40 K are attainable in high earth orbits. Placing a radiatively cooled telescope in a halo orbit around the Lagrangian point L2 is a particularly attractive option and significantly lower temperatures can be achieved there than in Earth orbit. Optimised radiative cooling is an important element of the small Japanese mission SMIRT. We suggest that a combination of an ESA Medium-sized Mission with a NASA Explorer to send a 2m+ telescope to an L2 halo orbit would provide a cost-effective and powerful long-duration facility for the early 21st century.     

Computation of aircraft geometric height under radar surveillance

A radar system for geometric height estimation of civil aircraft is described. The system consists of one standard or mode S secondary surveillance radar (SSR) and one omnidirectional antenna sited away from SSR under an airplane. The geometric height is derived by trilateration. Systematic errors are compensated for by deriving the profile of the effect on height measurements of the bias in range measurements. A curve-fitting technique is then used, which estimates both the geometric height and any non-zero systematic errors     

A multioutput LLC-type parallel resonant converter

When an LLC-type parallel resonant converter (LLC-PRC) operates above resonant frequency, the switching transistors can be turned off at zero voltage. Further study reveals that the LLC-PRC possesses the advantage of lower converter voltage gain as compared with the conventional PRC. Based on the analytic results derived, a complete set of design curves from which a systematic design procedure is developed is obtained. Experimental results from a 150-W, 150-kHz, multioutput LLC-type PRC power supply are presented