Optimised radiative cooling of infrared space telescopes and applications to possible missions

General principles are outlined for the design of space infrared telescopes intended to cool by radiation to the lowest temperatures attainable without the use of on-board cryogens, and assuming on-orbit cooling after a warm launch. Maximum protection from solar and earth heating, maximum radiating area and efficiency and minimum absorbing area and absorptivity are the obvious basic criteria. The optimised design is a short, fat telescope surrounded by a series of radiation shields, each cooled by its own radiator. Maximising the longitudinal conductivity of the radiation shields and of the telescope tube itself is important both to the on-orbit cooling time and the final achieveable temperature. Realistic designs take between 80 and 200 days to cool to within a few degrees of equilibrium temperatures, depending on the materials used. Great advantages accrue from the use of an orbit distant from earth. Both simple models and detailed simulations suggest that temperatures of 30 to 40 K are attainable in high earth orbits. Placing a radiatively cooled telescope in a halo orbit around the Lagrangian point L2 is a particularly attractive option and significantly lower temperatures can be achieved there than in Earth orbit. Optimised radiative cooling is an important element of the small Japanese mission SMIRT. We suggest that a combination of an ESA Medium-sized Mission with a NASA Explorer to send a 2m+ telescope to an L2 halo orbit would provide a cost-effective and powerful long-duration facility for the early 21st century.     

Computation of aircraft geometric height under radar surveillance

A radar system for geometric height estimation of civil aircraft is described. The system consists of one standard or mode S secondary surveillance radar (SSR) and one omnidirectional antenna sited away from SSR under an airplane. The geometric height is derived by trilateration. Systematic errors are compensated for by deriving the profile of the effect on height measurements of the bias in range measurements. A curve-fitting technique is then used, which estimates both the geometric height and any non-zero systematic errors     

A multioutput LLC-type parallel resonant converter

When an LLC-type parallel resonant converter (LLC-PRC) operates above resonant frequency, the switching transistors can be turned off at zero voltage. Further study reveals that the LLC-PRC possesses the advantage of lower converter voltage gain as compared with the conventional PRC. Based on the analytic results derived, a complete set of design curves from which a systematic design procedure is developed is obtained. Experimental results from a 150-W, 150-kHz, multioutput LLC-type PRC power supply are presented     

Current distribution control for parallel connected converters. II

For pt.I, see ibid., vol.28, no.3, p.829-840 (1992). In the central-limit control (CLC), the multiloop controls are employed to regulate the output voltage and track the central weighted current, thus equalizing the output current of each converter module (CM). The current distribution error (CDE) between the output current of each CM is used as a criterion in judging system performance. The prediction and simulation results of this control scheme are illustrated. When incorporated with the maximum current limit, the proposed control method can determine the number of required converters in the active state for each load condition. As a result, the efficiency of a system can be increased significantly. A comparison between the performances of the system under master-slave control (MSC) and CLC is given     

Calculation of resonance current in high-frequency series-resonanceDC-DC converters

A method to calculate the resonance current in high-frequency series-resonant DC-DC converters is presented that includes the effect of the reverse-bias capacitance of output rectifiers and that of the primary inductance of the output transformer. A computer program developed as a tool to determine the amplitude of the resonance current for any given input and output conditions is also discussed. The results of the computer calculations agree well with experimental measurements     

The plasma Environment of Mars

Space Science Reviews -     

Development of three-phase switch-mode rectifier using single-phase modules

This paper presents a three-phase (3/spl phi/) switch-mode rectifier (SMR) consisting of three 1 /spl phi/ SMRs, two center-tapped autotransformers and three changeover switches. The ac input sides of three modules are /spl Delta/-connected, and their dc output sides are connected in parallel. As any one module fault occurs, the remaining two modules becomes modified T-connected and continuously perform three-phase rectification with good line drawn power quality. When two constituted 1/spl phi/ modules are faulted, the proposed 3/spl phi/ SMR will be operated as 1/spl phi/ SMR. The quantitative and robust voltage regulation controls for the developed SMR are made to consider the effects of changes of system parameters, operating condition, and number of connected modules.     

Phase modulated DGPS transmitter implemented with a clamped-mode resonant converter

A clamped-mode resonant converter (CMRC) is proposed to be used as a transmitter which broadcasts correction signals in a differential Global Positioning System (DGPS). The digital information of the DGPS modulates the carrier with different modulation methods minimum shift keying (MSK) (recommended for the marine radiobeacon band), stepped binary phase shift keying (S-BPSK) and BPSK. The first two methods allow keeping the converter's operation in soft switching mode. Extensive trials under impedance mismatch and modulation conditions confirm that the soft switching mode is preserved.     

Influence of a surface tension minimum as a function of temperature on the marangoni convection

Aqueous long chain alcohol solutions have a surface tension which presents a minimum as a function of the temperature. At this particular temperature, the dimensionless Marangoni number is vanishing. It is thus expected that around the temperature of the minimum, Marangoni Convection would be slowered with a convective pattern deeply modified. An experiment to be performed in microgravity during the Texus 8 flight is described.     

Post-midnight equatorial irregularity distributions and vertical drift velocity variations during solstices

Longitudinal distributions of post-midnight equatorial ionospheric irregularity occurrences observed by ROCSAT-1 (1st satellite of the Republic of China) during moderate to high solar activity years in two solstices are studied with respect to the vertical drift velocity and density variations. The post-midnight irregularity distributions are found to be similar to the well-documented pre-midnight ones, but are different from some published distributions taken during solar minimum years. Even though the post-midnight ionosphere is sinking in general, longitudes of frequent positive vertical drift and high density seems to coincide with the longitudes of high irregularity occurrences. Large scatters found in the vertical drift velocity and density around the dip equator in different ROCSAT-1 orbits indicate the existence of large and frequent variations in the vertical drift velocity and density that seem to be able to provide sufficient perturbations for the Rayleigh-Taylor (RT) instability to cause the irregularity occurrences. The need of seeding agents such as gravity waves from atmospheric convective clouds to initiate the Rayleigh-Taylor instability may not be necessary.