Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.     

Controlling factors of Region 2 field-aligned current and its relationship to the ring current: Model results

One essential component of magnetosphere and ionosphere coupling is the closure of the ring current through Region 2 field-aligned current (FAC). Using the Comprehensive Ring Current Model (CRCM), which includes magnetosphere and ionosphere coupling by solving the kinetic equation of ring current particles and the closure of the electric currents between the two regions, we have investigated the effects of high latitude potential, ionospheric conductivity, plasma sheet density and different magnetic field models on the development of Region 2 field-aligned currents, and the relationship between R2 FACs and the ring current. It is shown that an increase in high latitude potential, ionospheric conductivity or plasma sheet density generally results in an increase in Region 2 FACs’ intensity, but R2 FACs display different local time and latitudinal distributions for changes in each parameter due to the different mechanisms involved. Our simulation results show that the magnetic field configuration of the inner magnetosphere is also an important factor in the development of Region 2 field-aligned current. More numerical experiments and observational results are needed in further our understanding of the complex relationship of the two current systems.     

Temperature comparison between CHAMP radio occultation and TIMED/SABER measurements in the lower stratosphere

Global Positioning System (GPS) receiver on the CHAllenging Mini-satellite Payload (CHAMP) and the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument, one of four on board the TIMED satellite, provide middle atmosphere temperature profiles by Radio Occultation (RO) and limb viewing infrared emission measurements, respectively. These temperature profiles retrieved by two different techniques in the stratosphere are compared with each other using more than 1300 correlative profiles in March, September and December 2005. The over-all mean differences averaged over 15 and 35 km are approximately −2 K and standard deviation is less than 3 K. Below 20 km of altitude, relatively small mean temperature differences ∼1 K are observed in wide latitudinal range except for June (during the SABER nighttime observation). In the middle to low latitudes, between 30°S and 30°N, the temperature difference increases with height from ∼0–1 K at 15 km, to ∼−4 K at 35 km of altitude. Large temperature differences about −4 to −6 K are observed between 60°S and 30°N and 31–35 km of altitude for all months and between 0° and 30°N below 16 km during June (nighttime).     

Development of an Italian low cost GNSS/INS system universally suitable for mobile mapping

The first studies for the mobile mapping and creation of a vehicle for this kind of research was carried out by Canadian Researchers in the 1980s. Since then, these vehicles have been widely employed in several applications (road cadastre maps, terrestrial photogrammihetry, road sign recognition, etc.) for both commercial and research purposes throughout the world. Many GNSSIINS vehicles which can be equipped in different ways with one or more GPS, inertial sensors, and one or several cameras, have been realized. A characteristic shared by most of these devices concerns the high costs of the sensors, of the realization and of the maintenance. For this reason, a GNSSIINS system, that is suitable for any vehicle, made up of low cost devices (two GPS receivers, an INS, and a camera rigidly placed on a metallic bar), has been designed and built by our research group. Two tests run at different velocities have been carried out to evaluate the reliability of the system. After a presentation of the system, the differences that were witnessed during the application of these calibration methods are explained herein.     

NOAA -14 September 28, 2006 (DOY 271) tumble anomaly

This describes a NOAA-14 spacecraft loss of control event and the lessons learned. The lessons learned are in two categories: contingency recovery operations; and on-orbit propulsion system isolation methods. The work is motivated in recognition of the effort of the NOAA off-line engineering support team and their NOAA civil servant mission leads and operations support staff.     

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

Comet nucleus sample return: Plans and capabilities

ROSETTA — the Comet Nucleus Sample Return mission — is one of the four Cornerstone missions to which ESA has committed itself in its approved Long-Term Programme Horizon 2000. The mission is currently being studied in collaboration with NASA. The comet-nucleus samples that ROSETTA is to provide will allow us to study some of the most primitive material in the solar system and the physical and chemical processes that marked the beginning of the system 4.6 billion years ago. For ESA, ROSETTA is a new type of mission: one which will return a sample at cryogenic temperature, and where as much effort has to be spent on preparing the laboratory analysis on-ground as has to be invested in preparing the space segment with the sample acquisition and in situ documentation. As part of the preparation for this mission, ESA is now starting to consider Planetary Protection issues.     

Revised upper limit on the internal magnetic moment of Venus

Over four Venus years of low altitude nightside PVO magnetometer observations are used to establish a new upper limit for the magnetic moment of Venus. Improvements over previous studies include data coverage and new instrument calibration information. The upper limit on an internal dipole moment is determined to be 8.4 × 10¹⁰ T m³.