An IR,optical and X-ray study of the two state behaviour of GX 339-4

We review results of correlated IR, optical and X-ray observations of GX 339-4 made from March 1981 through May 1984. In the soft X-ray state, the object does not show outstanding optical and X-ray variability. Night-to-night smooth optical variations of 0.3 magnitudes were however present during one observing run. In contrast, the hard X-ray state is characterised by strong erratic optical and X-ray fluctuations on time scales from 20 milliseconds to seconds, as well as 7 to 20 second quasi-periodic oscillations. The optical counterpart appears much redder in the IR during the hard state. Particular attention is drawn to the hard to soft X-ray transition which occured in June 1981. The shape of the IR to X-ray energy distribution is discussed. The unusual features of this black hole candidate are examined in the framework of the current theories of accretion.Based partly on observations obtained at the European Southern Observatory, La Silla, Chile.     

The sun in the far infrared and sub-mm region

A review is given of the solar radiation between wavelengths of approx. 5 m. and 1 mm. After discussing the astrophysical background (Section 2), we review the brightness temperatures measured in the continuous spectrum in the disk center (Section 3), and compare them with model predictions. The observed limb darkening (or brightening) is described in Section 4, and the line spectrum in Section 5. In Section 6 considerations are given on the usefulness of infrared observations for the investigation of small structures on the Sun.     

Observing the Sun at 20–650 MHz at Thermopylae with Artemis

Fine structure of type IV radio solar bursts with a great variety and complexity often give much information in different ways and enable estimation of various coronal characteristics. In this work, we expose our new method for fine structure revealing and separation of two basic kinds of type IV fine structure, as fibers and pulsations. We also estimate frequency drift of fibers from dynamic spectra, clean from continuous background, with a prototype method using 2-D Fourier transform and we estimate periodicities of fibers as well as pulsations with continuous wavelet transform. Working with the last method we found periodicities close to 3 min umbral oscillations and 5 min global solar oscillations.     

CME Theory and Models

This chapter provides an overview of current efforts in the theory and modeling of CMEs. Five key areas are discussed: (1) CME initiation; (2) CME evolution and propagation; (3) the structure of interplanetary CMEs derived from flux rope modeling; (4) CME shock formation in the inner corona; and (5) particle acceleration and transport at CME driven shocks. In the section on CME initiation three contemporary models are highlighted. Two of these focus on how energy stored in the coronal magnetic field can be released violently to drive CMEs. The third model assumes that CMEs can be directly driven by currents from below the photosphere. CMEs evolve considerably as they expand from the magnetically dominated lower corona into the advectively dominated solar wind. The section on evolution and propagation presents two approaches to the problem. One is primarily analytical and focuses on the key physical processes involved. The other is primarily numerical and illustrates the complexity of possible interactions between the CME and the ambient medium. The section on flux rope fitting reviews the accuracy and reliability of various methods. The section on shock formation considers the effect of the rapid decrease in the magnetic field and plasma density with height. Finally, in the section on particle acceleration and transport, some recent developments in the theory of diffusive particle acceleration at CME shocks are discussed. These include efforts to combine self-consistently the process of particle acceleration in the vicinity of the shock with the subsequent escape and transport of particles to distant regions.     

Oxygen Isotope Processes and Transfer Reactions

A unique kinetic isotope effect has been found in the formation process of ozone molecules. Isotope enrichments of about 10% above statistically expected values were first discovered in atmospheric isotopomers ⁴⁹O₃ and ⁵⁰O₃ and later in many other molecular combinations. Most recently the source of this effect was identified through measurement of isotope-specific ozone formation rate coefficients which show a large variability of over 50%. Ozone molecule formation is a complex process since different reaction channels contribute to a specific isotopomer. In addition, fast oxygen isotope exchange reactions determine the abundance of atomic oxygen participating in ozone formation. The isotope enrichments observed are both pressure and temperature-dependent and they decrease at pressures above 100 mbar and toward lower temperatures. Ozone possesses not only one of the most unusual isotope anomalies, it also serves as a mediator by transferring heavy oxygen from the O₂ reservoir to other species. Stratospheric isotope composition of CO₂ has been recently measured with high accuracy and a pronounced isotopic signature was found which shows that ¹⁷O is preferentially transferred from O₃ into CO₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

Radar: The Cassini Titan Radar Mapper

The Cassini RADAR instrument is a multimode 13.8 GHz multiple-beam sensor that can operate as a synthetic-aperture radar (SAR) imager, altimeter, scatterometer, and radiometer. The principal objective of the RADAR is to map the surface of Titan. This will be done in the imaging, scatterometer, and radiometer modes. The RADAR altimeter data will provide information on relative elevations in selected areas. Surfaces of the Saturn’s icy satellites will be explored utilizing the RADAR radiometer and scatterometer modes. Saturn’s atmosphere and rings will be probed in the radiometer mode only. The instrument is a joint development by JPL/NASA and ASI. The RADAR design features significant autonomy and data compression capabilities. It is expected that the instrument will detect surfaces with backscatter coefficient as low as −40 dB.RADAR Team LeaderThis revised version was published online in July 2005 with a corrected cover date.     

Development of three-phase switch-mode rectifier using single-phase modules

This paper presents a three-phase (3/spl phi/) switch-mode rectifier (SMR) consisting of three 1 /spl phi/ SMRs, two center-tapped autotransformers and three changeover switches. The ac input sides of three modules are /spl Delta/-connected, and their dc output sides are connected in parallel. As any one module fault occurs, the remaining two modules becomes modified T-connected and continuously perform three-phase rectification with good line drawn power quality. When two constituted 1/spl phi/ modules are faulted, the proposed 3/spl phi/ SMR will be operated as 1/spl phi/ SMR. The quantitative and robust voltage regulation controls for the developed SMR are made to consider the effects of changes of system parameters, operating condition, and number of connected modules.     

The plasma Environment of Mars

Space Science Reviews -     

粉末高温合金粘塑性试验评定与本构模型参数估计

 开展了粉末高温合金 FGH95 550℃、600℃和 650℃等 3种温度下控制应变率单向拉伸试验和 550℃下循环加载试验研究,结果表明 :600℃以下,快、慢应变率时,5%的试验应变范围内应力—应变曲线都一直上升,不存在应力饱和现象,热恢复效应不显著;但 650℃下慢应变率时则存在较明显的应力饱和现象,反映出在此条件下必须考虑蠕变效应。温度越高应变率对 FGH95的拉伸力学性能影响越明显,但总的说来是一种应变率不甚敏感的循环硬化材料。最后,在试验的基础上建立了 FGH95的 Bonder-Partom统一弹-粘塑性本构模型,理论与试验吻合较好,表明该模型能够模拟 FGH95的应力-应变关系曲线、应变率响应特性以及循环硬化特性,从而为 FGH95粉末高温合金构件的高温应力分析打下了基础。     

振动攻丝最大扭矩的计算模型

 振动攻丝工艺参数的选择对于振动攻丝的工艺效果的好坏具有重要影响。目前一般通过大量单因素实验来获取合理的工艺参数。这种方法周期长、成本高,严重限制了该技术的应用。因此研究振动攻丝工艺参数的简易确定技术极为必要。作者提出了一种新的描述回弹量和重复切削次数的关系式,并在此基础上利用重复切削理论建立了振动攻丝最大扭矩的一般计算模型。通过数值仿真验证了该模型与试验结果的一致性。该模型的建立为简化工艺参数的获取过程提供了一种有效途径。