Measurements of electrical breakdown in the vicinity of a sounding rocket differentially charged to 10 kV

During the initial period of high voltage biasing of the SPEAR-3 sounding rocket payload, it was observed that electrical breakdown occurred in the gas surrounding the rocket. The breakdown occurred almost all the way to apogee of 289 km on the upleg, but did not recur on the downleg until the payload reached an altitude of 100 km. It is suggested that this behavior can be attributed to payload outgassing on the upleg leading to abnormally high gas pressure near the payload skin. Consideration of a modified Paschen discharge process with varying pressure along the discharge path was found to be consistent with the results.     

Weapons System Open Architecture - a bridge between "embedded" and "off-board"

A demonstration program is described: Weapons System Open Architecture (WSOA) - funded jointly by the Air Force Research Laboratory (AFRL), DARPA, and the Open Systems Joint Task Force (OSJTF). WSOA provides an open systems "bridge" between legacy embedded mission systems and off-board C3I sources and systems. This "bridge" is used to support Internet-like connectivity between command and attack nodes. The foundation of this bridge is the creation of a Common Object Request Broker Architecture (CORBA) layer over Link 16. In addition, application of quality of service techniques and resource management technologies will ensure the timely exchange and processing of mission critical information by both attack and command nodes in even the most time-sensitive situations.     

End-to-End Modeling of the Solar Terrestrial System

Traditionally modeling for space science has concentrated on developing simulations for individual components of the solar terrestrial system. In reality these regions are coupled together. This coupling can be as simple as the driving of the magnetosphere – ionosphere – thermosphere system by the solar wind or as a complicated as the feedback of the ionospheric conductivity and currents on the magnetosphere. As part of the CISM project we are beginning a concentrated effort to compressively model the entire system. This approach includes chains of models. In the first chain physics based numerical models are utilized while in the second chain empirical models are coupled together. The first half of this paper discusses the numerical modeling approach by highlighting the coupling of pairs of regions within the system. In the second section we present results from empirical models which are combined to make long term forecasts of conditions in the geospace environment. It is expected that a validated and reliable forecast model for space weather can be obtained by combining the strongest elements of each chain.     

Defense radar development in Australia: 1939 to the present

Defense radar research and development in Australia is today largely, but not exclusively, confined within Australia's Defense Science and Technology Organization, DSTO, and its R&D collaborators in universities. Radar has a long history in Australia, dating back to World War II links with British defense radar development, and radar R&D continues to be an important focus within DSTO. It is impossible, in the context of a brief conference paper, to give other than the broadest-brush picture of Australian radar development over a half-century or more. So the approach taken is necessarily highly selective and focuses specifically on several illustrative development projects, in an attempt to convey the flavor of national radar research priorities, the way they drive R&D and likely future directions. Despite the escalating requirement for a national skills base in defense radar and allied technologies, there are currently legitimate concerns about the robustness of this base. Recruitment of high-caliber researchers into the field of radar and management of radar research careers are issues currently presenting major challenges. A number of initiatives are in place linking DSTO with university research; a recent effort to enhance the stature and visibility of radar research in Australia is the establishment of the Centre of Expertise in Microwave Radar as a joint venture between DSTO and Adelaide University.     

Frequency line tracking using HMM-based schemes [passive sonar]

This paper deals with fluctuating line tracking, present on the so-called lofargram (low frequency analysis and recording) encountered in any passive sonar system. Considering such a line as a random walk modeled by a first-order Markov chain, we have recourse to the hidden Markov models (HMMs) arsenal. More precisely, we propose to track a frequency line with Viterbi and forward-backward algorithms. The originality of this work comes from the fact that a "probabilistic integration of the spectral power" approach allows us to construct a signal-to-noise (SNR)-knowledge-free method. Intensive simulations reveal no loss of performance.     

Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

Overview of TeV gamma ray observations

TeV emission has been observed with high signal-to-noise from: two pulsar-driven supernova remnants, the Crab Nebula and PSR B1706-44 and a blazar class AGN, Markarian 421. Other sources, observed without the benefit of major background reduction techniques, are some of the compact object binaries. These discoveries plus the discoveries of EGRET of more than 130 sources at lower energies point to a growing number of scientific questions capable of being addressed by this field (particularly for distant sources via intergalactic absorption processes). Rapid further development will come as new instruments employing a variety of background reduction techniques come on-line.     

Dynamic optimization of CELSS crop photosynthetic rate by computer-assisted feedback control.

A procedure for dynamic optimization of net photosynthetic rate (Pn) for crop production in Controlled Ecological Life-Support Systems (CELSS) was developed using leaf lettuce as a model crop. Canopy Pn was measured in real time and fed back for environmental control. Setpoints of photosynthetic photon flux (PPF) and CO2 concentration for each hour of the crop-growth cycle were decided by computer to reach a targeted Pn each day. Decision making was based on empirical mathematical models combined with rule sets developed from recent experimental data. Comparisons showed that dynamic control resulted in better yield per unit energy input to the growth system than did static control. With comparable productivity parameters and potential for significant energy savings, dynamic control strategies will contribute greatly to the sustainability of space-deployed CELSS.     

Recycling of inorganic nutrients for hydroponic crop production following incineration of inedible biomass.

The goal of resource recovery in a regenerative life support system is maintenance of product quality to sure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration is all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match the control treatment, and ash only quality formulated with reagent grade chemicals. When nutrient solutions were formulated using only ash following incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in a suppression of crop growth. When the ash is supplemented with reagent grade chemicals to establish the same balance as in the control--growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in similar growth to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.     

Novel sensor technology for monitoring and control of critical plant nutrient parameters.

A novel dielectric sensor technology has been developed for monitoring and control of plant nutrient delivery systems as part of NASA's Controlled Ecological Life Support System (CELSS) program. A unique measurement phenomenon was discovered in which the electrostatic field is shunted to a third terminal of the sensor, resulting in a much greater sensitivity to changes in the complex dielectric properties of the nutrient solution. Based on this phenomenon, a small, flexible, thin-film shunting dielectric sensor (SDS) was designed to provide low-frequency, non-invasive measurement of both the thickness and nutrient concentration of the layer of solution on a plant growth surface. Test results indicate a sensitivity of +/- 0.05mm in layer thickness while characterization of the ability to measure nutrient concentration continues. The development plan for this sensor is presented and other applications are discussed.