Electric Fields and Magnetic Fields in the Plasmasphere: A Perspective From CLUSTER and IMAGE

The electric field and magnetic field are basic quantities in the plasmasphere measured since the 1960s. In this review, we first recall conventional wisdom and remaining problems from ground-based whistler measurements. Then we show scientific results from Cluster and Image, which are specifically made possible by newly introduced features on these spacecraft, as follows. 1. In situ electric field measurements using artificial electron beams are successfully used to identify electric fields originating from various sources. 2. Global electric fields are derived from sequences of plasmaspheric images, revealing how the inner magnetospheric electric field responds to the southward interplanetary magnetic fields and storms/substorms. 3. Understanding of sub-auroral polarization stream (SAPS) or sub-auroral ion drifts (SAID) are advanced through analysis of a combination of magnetospheric and ionospheric measurements from Cluster, Image, and DMSP. 4. Data from multiple spacecraft have been used to estimate magnetic gradients for the first time.     

Analysis of CGSDS file delivery protocol: immediate NAK mode

We analyze the immediate negative acknowledgment (NAK) mode of the consultative committee for space data systems (CCSDS) file delivery protocol for the single-hop file transfer operation. We propose a timer setting rule that minimizes the expected time taken to transfer a file under the constraint that the throughput efficiency is maximized. Then, we derive the expected file delivery time and compare it with that of the deferred NAK mode. The main contribution is the closed-form expression for evaluating the performance metrics.     

Kalman filter based estimation of differential hardware biases with triangular interpolation technique for IRNSS

Ionosphere delay correction is the main error correction to the computation of single frequency user position using satellite navigation. However ionosphere delay consists of not only delay but also frequency dependent differential hardware biases from satellite and receiver ends. For ionosphere point of view, Indian Regional Navigation Satellite System (IRNSS) service area comes in equatorial anomaly region. It is a unique satellite navigation system which operates at L5 and S frequencies and consists of Geostationary Earth Orbit (GEO) and Geo Synchronous Orbit (GSO) satellite constellation. With IRNSS measurements availability, there is a good opportunity to estimate and analyse differential hardware biases with GEO/GSO combination and with equatorial ionosphere variation. In this paper, Kalman filter based estimation with triangular interpolation technique is used to estimate differential hardware biases for all IRNSS satellites and reference receivers at L5 frequency. The standard deviation of the 15?days of daily estimation of satellite differential hardware biases is in the range of 0.32 to 1.17 TECU for all IRNSS satellites. Similarly, the standard deviation of the 15?days of daily estimation varies up to 2.85 and 6.0 TECU for receiver differential hardware biases during calm and stormy period respectively. The ionosphere delay computed using estimated differential hardware biases is compared with Global Ionosphere Map (GIM) data. A rigorous analysis is carried out to study the error in the estimation in terms of input data noise level, satellite constellation and effect of latitude. Our result reveals that over IRNSS service area, there is an exponential increase in the error in the estimation of receiver differential hardware biases with respect to latitude.     

The Electron and ion Plasma Experiment for Fast

The ion and electron plasma experiment on the Fast Auroral Snapshot satellite (FAST) is designed to measure pitch-angle distributions of suprathermal auroral electrons and ions with high sensitivity, wide dynamic range, good energy and angular resolution, and exceptional time resolution. These measurements support the primary scientific goal of the FAST mission to understand the physical processes responsible for auroral particle acceleration and heating, and associated wave-particle interactions. The instrument includes a complement of 8 pairs of `Top Hat' electrostatic analyzer heads with microchannel plate (MCP) electron multipliers and discrete anodes to provide angle resolved measurements. The analyzers are packaged in four instrument stacks, each containing four analyzers. These four stacks are equally spaced around the spacecraft spin plane. Analyzers mounted on opposite sides of the spacecraft operate in pairs such that their individual 180° fields of view combine to give an unobstructed 360° field of view in the spin plane. The earth's magnetic field is within a few degrees of the spin plane during most auroral crossings, so the time resolution for pitch-angle distribution measurements is independent of the spacecraft spin period. Two analyzer pairs serve as electron and ion spectrometers that obtain distributions of 48 energies at 32 angles every 78 ms. Their standard energy ranges are 4 eV to 32 keV for electrons and 3 eV to 24 keV for ions. These sensors also have deflection plates that can track the magnetic field direction within 10° of the spin plane to resolve narrow, magnetic field-aligned beams of electrons and ions. The remaining six analyzer pairs collectively function as an electron spectrograph, resolving distributions with 16 contiguous pitch-angle bins and a selectable trade-off of energy and time resolution. Two examples of possible operating modes are a maximum time resolution mode with 16 angles and 6 energies every 1.63 ms, or a maximum energy resolution mode with 16 angles and 48 energies every 13 ms. The instrument electronics include mcp pulse amplifiers and counters, high voltage supplies, command/data interface circuits, and diagnostic test circuits. All data formatting, commanding, timing and operational control of the plasma analyzer instrument are managed by a central instrument data processing unit (IDPU), which controls all of the FAST science instruments. The IDPU creates slower data modes by averaging the high rate measurements collected on the spacecraft. A flexible combination of burst mode data and slower `survey' data are defined by IDPU software tables that can be revised by command uploads. Initial flight results demonstrate successful achievement of all measurement objectives.     

具有两个测量控制面的适应壁风洞理论与实验

本文研究了具有两个测量控制面的适应壁风洞。在超临界马赫条件下,做了二维NACA-0012翼型实验。在近洞壁处的两个控制面上测取了静压。基于上述测量,叙述了在适应壁风洞中得到无干扰流场的迭代方法。给出了为外场计算这两个控制面上静压的函数关系。评述了所选取迭代方法的收敛性。得到了一步收敛公式,并且在数字模拟风洞中得到证实。结果指出,应用一步迭代公式,所选取的迭代方法可以加速使流场收敛到无界条件。     

Interstellar Mapping and Acceleration Probe (IMAP): A New NASA Mission

The Interstellar Mapping and Acceleration Probe (IMAP) is a revolutionary mission that simultaneously investigates two of the most important overarching issues in Heliophysics today: the acceleration of energetic particles and interaction of the solar wind with the local interstellar medium. While seemingly disparate, these are intimately coupled because particles accelerated in the inner heliosphere play critical roles in the outer heliospheric interaction. Selected by NASA in 2018, IMAP is planned to launch in 2024. The IMAP spacecraft is a simple sun-pointed spinner in orbit about the Sun-Earth L1 point. IMAP’s ten instruments provide a complete and synergistic set of observations to simultaneously dissect the particle injection and acceleration processes at 1 AU while remotely probing the global heliospheric interaction and its response to particle populations generated by these processes. In situ at 1 AU, IMAP provides detailed observations of solar wind electrons and ions; suprathermal, pickup, and energetic ions; and the interplanetary magnetic field. For the outer heliosphere interaction, IMAP provides advanced global observations of the remote plasma and energetic ions over a broad energy range via energetic neutral atom imaging, and precise observations of interstellar neutral atoms penetrating the heliosphere. Complementary observations of interstellar dust and the ultraviolet glow of interstellar neutrals further deepen the physical understanding from IMAP. IMAP also continuously broadcasts vital real-time space weather observations. Finally, IMAP engages the broader Heliophysics community through a variety of innovative opportunities. This paper summarizes the IMAP mission at the start of Phase A development.     

Magnetically suspended MEMS spinning wheel gyro

A concept of a magnetically suspended spinning wheel gyro is described. The gyro is based on a patented, planar magnetic actuator and position sensor configuration with a gyro wheel that is rotated by a multi-phase electromagnetic spin motor. The motor and actuator/sensor configurations, in addition to providing the necessary forces to suspend the spinning wheel, are amenable to fabrication using some of the developing MEMS fabrication technologies, making batch fabrication of the gyro possible. This provide the capability for high production yield in high volume through the use of batch processing, without the need for skilled hand labor, resulting in high yields, high reliability, and low cost of ownership. The gyro concept is described in detail. The high-speed rotation of the wheel, somewhat smaller than a dime, can produce an angular momentum much larger than that of the Coriolis force based MEMS gyros now receiving intensive development, and is expected to provide considerably higher performance than currently available from this class of instrument. Two axes of angular rate information and three axes of acceleration information are provided by the control loops that center the wheel within the case. Thus, two such magnetically suspended spinning wheel gyros can be used to implement a complete IMU, and can also provide redundancy in three of the five degrees of freedom     

基于非结构自适应网格和嵌入边界法的残差格式研究

嵌入边界法由于在求解NS方程时能够简化网格生成问题而在计算流体领域受到越来越广泛的关注。简言之,嵌入边界法能够简化大变形和运动条件下多物理流动模拟、流固相互作用耦合问题,然而壁面边界条件的精确处理仍旧是该方法需要解决的问题。在本文工作中,为考虑壁面边界条件而在NS方程中增加了补偿项,同时采用非结构网格自适应技术保持了壁面边界条件的精度。     

Study of Dynamic Loads of Aircraft Bevel Gear Systems

This paper studies the dynamic loads of bevel gears with circular and straight teeth with the overlap factors less than two (ε_α < 2) and more than two (ε_α > 2). The advantages of the gears with straight teeth with ε_α > 2 are shown.